Stereocontrol in Organic Synthesis Using the Diphenylphosphoryl Group

In 1959, Horner showed that metalated alkyldiphenylphosphane oxides react with aldehydes or ketones to give alkenes. With this reaction, the diphenylphosphoryl (Ph₂PO) group made its entrance into synthetic organic chemistry. In the thirty-six years since that date, extensive research has shown that this olefination, the Horner–Wittig reaction, has unique properties that make it much more than simply the phosphane oxide cousin of the more famous phosphorus-based olefinations—the Wittig reaction (based on phosphonium salts) and the Wadsworth–Emmons reaction (based on phosphonate esters). Early work on the Horner–Wittig reaction concentrated on the reactivity of phosphane oxides and the regioselectivity of their reactions, but more recently the power of the Ph₂PO group to control the stereochemistry of alkenes, and to produce “on demand” either stereoisomer in high stereochemical purity, has emerged. From the study of these stereocontrolled Horner–Wittig reactions arose the realization that the Ph₂PO group is useful not only for the control of the two-dimensional stereochemistry of alkenes, but also of three-dimensional stereochemistry in general. After a brief introduction to phosphane oxide chemistry, this review will examine the Horner–Wittig reaction, in both its original and “stereocontrolled” varieties. From there, we will move on to an account of the stereoselective construction of molecules containing the Ph₂PO group, concentrating on the stereochemical directing effects of the Ph₂PO group and on the role of its unique combination of attributes—steric bulk, electronegativity, and Lewis basicity—in controlling these reactions. Finally, we will present what is intended as a practical guide to this chemistry, covering the type of functionalized alkenes that have been made with the help of the Ph₂PO group and giving guidelines that we hope will help the organic chemist to make the most of the chemistry the Ph₂PO group has to offer.     

Phase Equilibria and Crystal Structure of Complex Oxides in the La–Sr–Co–Ni– System

Phase equilibria in the La–Sr–Co–Ni–O system were studied in air at 1100°. The samples for the study were synthesized by the standard ceramic and citrate processes. The limiting solubility and structure of La_1-xSr_xCo_1-yNi_yO_3- and (La_1-xSr_x)₂Co_1-yNi_yO₄ solid solutions were determined by Xray powder diffraction analysis. La_1-xSr_xCo_1-yNi_yO₃- solid solutions with 0 x 0.5 have a distorted rhombohedral perovskitelike structure (R c space group). An increase in the strontium concentration reduces the rhombohedral distortions, and the compounds with x < 0.5 have an ideal cubic structure (Pm3m space group). (La_1-xSr_x)₂Co_1-yNi_yO₄ crystals have a tetragonal K₂NiF₄ type unit cell (I4/mmm space group). The relationships between unit cell parameters and compositions were obtained for singlephase La_1-xSr_xCo_1-yNi_yO_3- and (La_1-xSr_x)₂Co_1-yNi_yO₄ samples. The existence regions of La_1-xSr_xCo_1-yNi_yO₃- and La_1-xSr_x)₂Co_1-yNi_yO₄ solid solutions were distinguished on P–T phase diagrams.     

用水合五氧化二锑分离放射性母子体的研究─—一个新的~(201)Pb—~(201)T1发生器的制备

本文研究了无机离子交换剂—水合五氧化二锑（Sb2O5·nH2O）的制备，并用它分离了放射性母子体，制备了一个新的201Pb—201Tl放射性发生器。结果表明，末发生器具有高效、快速、简便的特点，此外还讨论了离子交换反应的机理。     

Voltammetric and X-ray diffraction analysis of the early stages of the thermal crystallization of mixed Cu,Mn oxides

Mixed Cu,Mn, Cu,Mn,Al, Cu,Mg,Mn, and Cu,Mg,Mn,Al oxides were obtained by calcination of amorphous basic carbonate (Cu,Mn oxides) or hydrotalcite-like precursors at 300–800 °C. The product composition was characterized by chemical analysis, XRD, and voltammetry of the microparticles. The XRD amorphous portion was detected indirectly by XRD and directly by voltammetry. Tenorite (CuO) and spinels were the main crystalline components of the oxide mixtures. The presence of Al shifted the onset of the crystallization of XRD-detectable tenorite and spinel to temperatures higher by 100–200 °C, and the presence of Mg shifted tenorite crystallization by 100 °C, but voltammetry was able to detect these phases even in XRD-amorphous or nanocrystalline calcines. Voltammetry is hence suitable for analysis of poorly crystalline oxides that can be used in heterogeneous catalysis.     

Reaction of dibenzylphosphine oxide with α,β-unsaturated O-methyloximes

The reaction of dibenzylphosphine oxide with O-methyloximes of some ,-unsaturated ketones results in the phosphorylation at the -carbon atom to form methoxyiminophosphine oxides, whereas the reaction of dibenzylphosphine oxide with O-methyloximes of ,-unsaturated aldehydes affords aminodihydrophosphole oxides.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

The 1,3-Dipolar Cycloadditions of 3-Arylsydnone-4-Carbonitrile Oxides with Alkenes

3-Arylsydnone-4-carbonitrile oxides may undergo 1,3-dipolar cycloadditions with alkenes to produce the corresponding 3-aryl-4-(5-substituted-isoxazolin-3-yl)sydnones. The direct reaction of 3-arylsydone-4-carbohydroximic acid chlorides with alkenes may also give the same products, and with higher yield.     

Reduced-size polarized basis sets for calculations of molecular electric properties. IV. First-row transition metals

Recent studies of the perturbation-dependent basis sets have indicated the possibility of a significant reduction of the size of the usual CGTO sets without considerable loss of accuracy in calculations of molecular electric properties. The resulting (ZPolX) basis sets have been developed for several atoms of the first and second row of the Periodic Table. The same method of the ZPolX basis set generation is extended for the first-row transition metals and the corresponding contracted ZPolX basis sets of the size [6s5p3d1f] are determined for both nonrelativistic and scalar relativistic calculations. The performance of the ZPolX basis sets is verified in calculations on the first-row transition metal oxides at the level of the ROHF, ROHF/CASPT2, and ROHF/CCSD(T) approximations. Also the study of the dipole polarizability of TiCl₄ confirms the excellent features of these very compact basis sets. The ZPolX basis sets for nonrelativistic and relativistic calculations of molecular electric properties are available on the web page http://www.chem.uni.torun.pl/zchk/basis-sets.html.     

Über Oxide mit dem “Butterfly-Motiv”: Rb6[Fe2O5] und K6[Fe2O5]

New Oxides with the “Butterfly-Motive”: Rb₆[Fe₂O₅] and K₆[Fe₂O₅] Rb₆[Fe₂O₅] and K₆[Fe₂O₅] were obtained for the first time by annealing intimate mixtures of “Rb₆CdO₄” with CdO (molar ratio 1 : 1.1) and KO_0.48 with CdO (molar ratio 5.9 : 1) respectively in closed Fe-cylinders. Determination and refinement of the crystalstructure confirms the space group C2/m (four-circle-diffractometer data). Rb₆[Fe₂O₅]: Ag Kα , 720 out of 1220 Io(hkl), R = 9.68%, R_w = 6.09%; a = 718.9pm, b = 1183.1 pm, c = 695.4pm, β = 95.05°, Z = 2; K₆[Fe₂O₅]: MoKα , 1214 Out of 12141_o(hkl), R = 3.20070, R_w = 2.48%, a = 691.21 pm, b = 1142.78pm, c = 665.50pm, β = 93.82°, Z = 2. The binuclear unit [O₂FeOFeO₂]^6? already known to be planar with oxoferrates(II) now was observed to be angular here and closely related to Na₆[Be₂O₅].     

Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.