电感耦合等离子体原子发射光谱分析中不同电离电位元素基体效应的比较研究

选择不同电离电位的基体元素K、Na、La、Y和Mg,比较研究了它们对分析元素谱线强度的影响,其影响程度与谱线激发电位及基体元素电离电位有定量的相关关系。碱金属基体(K、Na)和非碱金属基体(La、Y和Mg)对分析元素检出限、背景强度及其相对标准偏差的影响显著不同,后者的记忆效应也大于前者。La的电离电位与Na相差不大。但其基体效应与Y相似,表明墓体效应与基体元素的化学性质有关。     

杂氮硅三环成环反应的研究

本文报导了与硅原子直接相连的有机基团(R)对杂氮硅三环成环速率的影响。利用气相色谱检测成环反应的产物之一——乙醇的生成速率和数量,并同与硅相连的R基团对成环反应速率的影响作比较。实验结果表明五种杂氮硅三环成环速度顺序为Cl_2CH—>ClCH_2—>ClCH_2CH_2CH_2—>CH_2=CH—>CH_3—,这与理论推断相符。     

氢化物发生电感耦合等离子体原子发射光谱同时测定纯铜中氢化物和非氢化物形成元素

用新型氢化物发生喇叭口Ⅱ型同心雾化器替代Meinhard同心雾化器，溶液雾化为气溶胶和氢化物发生反应生成氢化物气体就可以在雾化系统中同时进行，选用L-巯基丙氨酸(L-cysteine)和硫脲(thiourea)作为基体铜的掩蔽剂，无需分离基体铜，实现了电感耦合等离子体原子发射光谱(ICP-AES)同时测定纯铜样品中氢化物和非氢化物形成元素的目的。研究了酸度、NaBH4的浓度、载气流速及清洗时间对氢化物形成元素的影响，考察了铜基体对氢化物形成元素的化学干扰情况。用本方法测定了纯铜标准样品(NIST SRM400)，结果令人满意。在1000mg/L纯铜样品溶液中，其氢化物形成元素As、Bi、Sb、Sn、Se和Te的检出限分别为0．08、0．15、0．10、0．17、0．21和0．23μg／L。     

8-羟基喹啉-5-磺酸纤维微柱分离富集电感耦合等离子体原子发射光谱法同时测定多种痕量元素

本文合成了8-羟基喹啉-5-磺酸纤维滤纸片,以此做为微柱填充物同时富集了10种痕量元素,并分离了样品中的高盐组分.本方法可使痕量组分的分离与富集同步进行,因而特别适用于原子光谱测定前样品的预处理.     

Oxidation and Reduction Processes During NO x Removal with Corona-Induced Nonthermal Plasma

In this paper, the NO-to-NO ₂ conversion in various gaseous mixtures is experimentally investigated. Streamer coronas are produced with a dc-superimposed high-frequency ac power supply (10–60 kHz). According to NO _x removal experiments in N ₂ +NO _x and N ₂ +O ₂ +NO _x gaseous mixtures, it is supposed that the reverse reaction NO ₂ +ONO+O ₂ may not only limit NO ₂ production in N ₂ +NO _x mixtures, but also increase the energy cost for NO removal. Oxygen could significantly suppress reduction reactions and enhance oxidation processes. The reduction reactions, such as N+NON ₂ +O, induce negligible NO removal provided the O ₂ concentration is larger than 3.6%. With adding H ₂ O into the reactor, the produced NO ₂ per unit removed NO can be significantly reduced due to NO ₂ oxidation. NH ₃ injection could also significantly decrease the produced NO ₂ via NH and NH ₂ - related reduction reactions. Almost 100% of NO ₂ can be removed in gaseous mixtures of N ₂ +O ₂ +H ₂ O+NO ₂ with negligible NO production.     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

河口水体中痕量稀土元素的共沉淀预富集-电感耦合等离子体质谱法测定研究

建立了氢氧化铟共沉淀预富集 -电感耦合等离子体质谱法测定河口水体中痕量稀土元素的方法。实验结果表明 ,在80mg·L -1的In3 +和pH9.5的实验条件下 ,在1.0L水样中添加5.0～200.0ng的混合稀土标准溶液 ,均能定量回收 ,回收率在82.2 %～106.9 %之间。方法的分析流程空白为0.04(Tb)～10.17(La)ng·L -1,检出限在0.17(Yb)～1.46(La)ng·L-1之间 ,精密度 (RSD ,n=3)小于11.7 % ,可满足河口淡水和海水样品中的痕量稀土元素定量分析的要求     

原位漫反射红外光谱研究氮氧化物在Ag-ZSM-5催化剂上的吸附态及选择性催化还原反应机理

利用原位分析方法对催化剂表面吸附态进行动态表征，对了解催化反应机理具有重要的意义。漫反射红外光谱是一种理想的原位方法，应用该方法在298－773K范围原位考察了以丙烯为还原剂，NO在Ag-ZSM-5催化剂上的吸附态及选择性催化还原过程。认为NO的选择性催化还原符合直接作用机理，还原的关键是形成有机－氮氧化物（R－NO2或R－ONO）中间体。O2的作用是使C3H6充分活化，并是有效产生有机－氮氧化物不可缺少的条件。