Synthesis of nanocomposites from cationic polyacrylamide and modified carbon black: Application as flocculants for oily sludge suspension

Carbon black was modified using various liquid‐phase oxidation methods (modified carbon black = m‐CB, m = (1, 2, 3): 1, sulfuric acid/potassium permanganate method; 2, nitric acid method; 3, hydrogen peroxide method). With acetone–ethylene glycol as initiator, dimethyldiallylammonium chloride (DMDAAC) and acrylamide (AM) as monomer, cationic polyacrylamide (CPAM) was prepared by UV excitation of the monomer. The m‐CB/CPAM nanocomposites were synthesized using a hydrothermal method. The factors that affected the molecular weight of CPAM were investigated, including the total monomer concentration, the dosage of the complex initiator, the mass ratio of m_AM:m_DMDAAC and the UV irradiation time. The chemical structures and morphologies of the samples were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental composition, X‐ray diffraction and scanning electron microscopy. 1‐CB/CPAM was utilized to flocculate oil sludge suspension, and the effects of 1‐CB quality, 1‐CB/CPAM dosage, temperature and pH value on the flocculation performance of 1‐CB/CPAM were investigated. The flocculation mechanism of 1‐CB/CPAM was also analyzed. The results show that 1‐CB/CPAM has an outstanding flocculation effect, and it flocculates oil sludge particles by adsorption bridging and charge neutralization in acidic and alkaline conditions.     

低温燃烧法制备Mn-CeO_x催化剂及其NH_3-SCR脱硝性能

通过低温燃烧法(LCS)制备了不同金属硝酸盐与柠檬酸物质的量比的系列Mn-CeO_x(LCS)锰铈催化剂,将其与共沉淀法(CP)制备的Mn-CeO_x(CP)锰铈催化剂相对比,结合XRD、XPS、FESEM和H2-TPR等技术表征,对其NH_3-SCR脱硝催化性能进行了研究。结果表明,金属硝酸盐与柠檬酸的物质的量比是影响Mn-CeO_x(LCS)催化剂脱硝性能的重要因素。虽然两种催化剂中的锰氧化物组分均为无定型,但相较于Mn-CeO_x(CP),Mn-CeO_x(LCS)表面具有较高的锰含量与Oα/(Oα+Oβ)比,其脱硝催化性能也较高;同时,Mn-CeO_x(LCS)锰铈催化剂上有更多的多级孔,有利于气体在催化剂上的吸附和反应。硝酸盐与柠檬酸物质的量比为36∶22的Mn-CeO_x(LCS)锰铈催化剂在80-180℃下脱硝率可达75%-100%;即使通入SO2,180℃下的脱硝率仍可稳定于74%。     

A New Insight into the Stereoelectronic Control of the Pd0-Catalyzed Allylic Substitution: Application for the Synthesis of Multisubstituted Pyran-2-ones via an Unusual 1,3-Transposition

Pyran-2-ones 3 undergo a novel Pd⁰-catalyzed 1,3-rearrangement to afford isomers 6 . The reaction proceeds via an η²-Pd complex, the pyramidalization of which (confirmed by quantum chemistry calculations) offers a favorable antiperiplanar alignment of the Pd−C and allylic C−O bonds ( C ), thus allowing the formation of an η³-Pd intermediate. Subsequent rotation and rate-limiting recombination with the carboxylate arm then gives isomeric pyran-2-ones 6 . The calculated free energies reproduce the observed kinetics semi-quantitatively.     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.     

Mesoporous carbon supported ultrasmall palladium particles as highly active catalyst for Suzuki‐Miyaura reaction

A fast and efficient eco‐friendly two‐step preparation of a palladium‐containing mesoporous carbon catalyst ( C1 ) from green and readily available carbon precursors (phloroglucinol and glyoxal), a porogen template (pluronic F‐127) and PdCl₂ is described. Catalyst C1 contains ultra‐small Pd nanoparticles (1.2 nm) uniformly dispersed in the carbon network and shows an outstanding activity for Suzuki‐Miyaura reactions in pure water: extremely low amounts of palladium (10 μequiv. in most cases) are sufficient to afford almost palladium‐free products (containing <0.25 ppm of precious metal without further purification steps).     

Magnetic properties in three electrons under Rashba spin-orbit interaction and magnetic field

In this work, we study three-electron magnetic susceptibility in quantum dots under Rashba spin-orbit interaction (SOI) and magnetic field by an analytical methodology. The Hamiltonian of the system is separated to center of mass and relative terms using the Jacobi transformations and the hyperspherical coordinates. By solving Schrodinger equation, energy levels and thereby the susceptibility are calculated using canonical ensemble. At zero temperature, the magnetization reduces with increasing magnetic field with and without Rashba SOI in three-electron-quantum dot without electron-electron (e-e) interaction. Also, SOI slightly changes the magnetization for three-electron-quantum dot without e-e interaction. At nonzero temperature, the magnetization shows a paramagnetic peak when the magnetic field increases. This peak position changes under the SOI. In the presence of e-e interaction, the susceptibility enhances with raising magnetic field and it shows a maximum. The susceptibility at low magnetic field is negative and then it becomes positive. The susceptibility with e-e interaction and without SOI is always diamagnetic and its magnitude reduces with enhancing magnetic field. The susceptibility shows a transition between diamagnetic and paramagnetic with e-e interaction and SOI.     

Single-walled carbon nanotube (SWNT)-carboxymethylcellulose (CMC) dispersions in aqueous solution and electronic transport properties when dried as thin film conductors

Obtaining uniformly dispersed SWNT within an aqueous mixture for subsequent use as a dried coating in electronic biosensors is a challenge. The objective of this study is to relate SWNT dispersion conditions to resultant dried film properties. Aqueous solutions of SWNT dispersed with CMC (a dispersing agent with unique properties compatible with biomolecules) at different SWNT:CMC weight ratios and at different sonication conditions were studied. Solution particle size distribution data was obtained using dynamic light scattering. Differently formulated/processed SWNT/CMC solutions were used to form dry thin, conductive films. The resistance of each film was measured and its resistivity calculated. Response Surface Methodology (RSM) design of experiments (DOE) analysis was used as the tool to fit the data to establish a model and identify trends for the parameters studied. Profilometry was used to examine film surface uniformity. 3D optical microscopy was used to investigate film morphology and determine film thickness, and to relate these data back to solution dispersion conditions and dried film resistances. The lowest dried film resistivity (0.012 ohm-cm) was obtained at the highest levels of parameters studied in the DOE. Smaller solution particle size resulted in lower dried film surface roughness and better film uniformity.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Coordination compounds of some transition metal ions with new Schiff base ligand derived from dibenzoyl methane. Structural characterization,thermal behavior,molecular structure,antimicrobial, anticancer activity and molecular docking studies

Series of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes were prepared with tetradentate Schiff base ligand derived by condensation of 2‐aminophenol with dibenzoylmethane. The novel Schiff base H₂L (2–2′‐((1Z,1Z’)‐(1,3‐diphenyl propane‐1,3 diylidene) bis (azanylylidene) diphenol) and its binary metal complexes were characterized by physicochemical procedures i.e. elemental analysis, FT‐IR, UV–Vis, thermal analyses (TGA/DTG), mass spectrometry, magnetic susceptibility and conductometric measurements. On the basis of these studies, an octahedral geometry for all these complexes was proposed expect Ni(II) complex which had tetrahedral geometry. Molar conductivity values revealed that the complexes were electrolytes except Mn(II), Zn(II) and Cd(II) complexes were non electrolytes. The ligand bound to the metal ions via two azomethine N and two phenolic OH as indicated from the IR and ¹H NMR spectral study. The molecular and electronic structures of H₂L and its zinc complex were optimized theoretically and the quantum chemical parameters were calculated. The antimicrobial activity against a number of bacterial organisms as Streptococcus pneumonia, Bacillus Subtilis, Pseudomonas aeruginosa and Escherichia coli and fungi as Aspergillus fumigates, Syncephalastrum racemosum, Geotricum candidum and Candida albicans by disk diffusion method were screened for the Schiff base and its complexes. The Cd(II) complex has potent antimicrobial activity. Anticancer activity of the Schiff base ligand and its metal complexes were evaluated in human cancer (MCF‐7 cells viability). The Cr(III) complex exhibited higher activity than other complexes and ligand. Molecular docking was used to predict the binding between Schiff base ligand (H₂L) and its Zn(II) complex and the receptors of RNA of amikacin antibiotic (4P20) and human‐DNA‐Topo I complex (1SC7). The docking study provided useful structural information for inhibition studies.     

Synthesis of V5+‐doped Ag/AgCl photocatalysts with enhanced visible light photocatalytic activity

V⁵⁺‐doped Ag/AgCl photocatalysts were prepared via the ion exchange method. The catalysts were characterized using X‐ray diffractometry, transmission electron microscopy, and energy‐dispersive X‐ray, X‐ray photoelectron, Fourier transform infrared and ultraviolet–visible spectroscopies. The V⁵⁺‐doped Ag/AgCl photocatalysts show much higher photocatalytic activities than Ag/AgCl under visible light irradiation for methyl orange (MO) decomposition. Especially, the 2.0 wt% V⁵⁺‐doped Ag/AgCl photocatalyst shows the highest photocatalytic activity and also high stability after five cycles. The MO degradation rate during each cycle is almost maintained at 97%. Electron spin resonance spectroscopy and radical trapping experiments reveal that holes play an important role in the photocatalytic process.