近红外光谱小波分析在土壤参数预测中的应用

从田间采集了150个田间土壤样本,在分析了所有样本的土壤参数统计特征之后,对原始近红外光谱数据进行了聚类分析,分别得到了50个土壤全氮和50个土壤有机质的等价样本及其对应光谱。对样本光谱曲线进行8层Biorthogonal小波包分解,分解得到的最低低频[80]结点对应着土壤水分以及土壤质地的光谱变化趋势,最高高频[8 255]结点对应着土壤粒度、光谱仪精度等引起的高频震荡。对以上两个结点进行重构并从样本光谱曲线中剔除以上影响成分,得到了对应的土壤参数特征光谱。基于特征光谱建立了土壤参数偏最小二乘回归模型：全氮偏最小二乘预测模型的预测系数r_c达到了0.960,验证系数r_v达到了0.920;有机质偏最小二乘预测模型的预测系数r_c达到0.922,验证系数r_v达到0.883。模型精度明显提高,满足实际生产的需要。     

The Influence of Ammonium on Nitrate Uptake and Assimilation in 2-Year-Old Ash and Oak Trees - A Tracer-Study with 15N

Abstract

Interactions between ammonium and nitrate as competitive N sources depend on various biotic and abiotic factors. The preference for one of these N sources and the influence of ammonium on nitrate uptake and nitrate reductase activity was investigated in a ¹⁵N labelling experiment using 2-year-old potted plants of ash (Fraxinus excelsior L.) and oak (Quercus robur L.) under greenhouse conditions.

Seedlings of both tree species use ammonium and nitrate in equal amounts when both N forms are supplied in a 1:1 ratio (1.5 mM NH₄ ⁺ + 1.5 mM NO₃ ^?), although there is a slight tendency that ammonium is preferred. In both species total N uptake is higher if ammonium and nitrate are supplied simultaneously when compared with uptake of nitrate alone (3 mM nitrate). If nitrate is the sole N source N uptake is only half as high as if ammonium and nitrate are supplied in a ratio of 1:1.

The distribution of nitrate reductase between shoot and roots is not influenced by the N-form: nitrate reductase activity is always highest in the roots of both species under the conditions of this experiment.

Xylem sap analyses showed that both species transport higher concentrations of amino acids than of nitrate from the roots to the shoot. The amino acid composition is independent of the type of N source. Furthermore, ash trees contain more nitrate in the xylem sap than oak trees, reflecting the higher N uptake and the higher nitrate reductase activity in the leaves of this species.     

化学发光法大气氮氧化物浓度自动分析仪中光信号探测模块温控系统设计

化学发光法是测量低浓度的大气氮氧化物含量的有效方法,可用于24h连续自动分析的大气环境监测系统。然而该方法需要高温转换室、高压臭氧发生模块、高温反应室等模块,使得仪器内的环境分布极为复杂,仪器在长时间运行后容易出现灵敏度下降、信噪比降低等现象。针对上述现象,设计了用于仪器的光信号探测模块的温度控制系统。该温控系统基于PID控制原理,通过AVR单片机ATMEGAl6对半导体制冷片（Ther—mo—ElectricCooling,TEC）的闭环控制来实现温度的精密控制。实验结果表明,该系统可以使光信号探测模块的温度控制在5℃±0．1℃,光电倍增管的暗噪声从25℃时的363个／s下降到5℃时的8个／s光子数,噪声波动标准差也从22降到3,能够很好地满足系统对信号探测稳定性的要求。     

Assessing the subsequent effect of nitrogen released from tobacco-waste on maize crop using a 15N isotope technique

The investigation of the residual effect of nitrogen (N) released from tobacco-waste (TW) using isotope techniques will provide valuable data for sustainable organic farming. For this aim, a pot experiment was conducted using the ¹⁵N isotope technique. The experiment was based on a completely randomised design with four replications and was conducted on a calcareous ustochrepts soil. TW at levels of 0, 10, 20, 30 and 40 t ha^?1 and N fertiliser as (NH₄)₂SO₄ at levels of 0, 20, 40, 60 and 80 kg N ha^?1 were used for the Bezostaja-1 wheat variety. Concerning mineral N fertilisation with 20 and 80 kg N ha^?1, additional treatments with ¹⁵N-labelled (NH₄)₂SO₂ (10 at.% exc.) have been applied. Following harvesting wheat plants, the Pioneer 3377 maize variety was used to see the residual effect of TW. After harvesting, dry matter yields were recorded and total N concentrations were determined. ¹⁵N determinations and calculations were also made for ¹⁵N treatments separately. TW had a significant residual effect on the growth of corn plant under the pot condition. Increasing rates of TW significantly increased the dry matter yield of corn plant following wheat from 3.31 t ha^?1 (at control) to 7.89 t ha^?1 (at the TW treatment of 40 t ha^?1). The ¹⁵N values derived from the ¹⁵N fertiliser decreased with increasing TW application. The average values of N derived from N fertiliser (Ndff) varied from 2.14 to 3.09% at the rates of 20 and 80 kg N ha^?1, respectively. However, N derived from TW (Ndftw) significantly increased from 16.93 to 24.59% (at 20 kg N ha^?1), and it also increased from 23.06 to 28.15% (at 80 kg N ha^?1) with increasing TW applications from 20 to 40 t ha^?1, respectively.     

New palladium (II) complexes containing phosphine‐nitrogen ligands and their use as catalysts in aminocarbonylation reaction

Aminocarbonylation of aryl halides, homogeneously catalysed by palladium, is an efficient method that can be employed for obtaining amides for pharmaceutical and synthetic applications. In this work, palladium (II) complexes containing P^N ligands were studied as catalysts in the aminocarbonylation of iodobenzene in the presence of diethylamine. Two types of systems were used: a palladium (II) complex formed in situ; and one prepared prior to the catalytic reaction. In general, the palladium complexes studied achieved high conversions in an average reaction time of less than 2 hr, which is less than that for the standard system (Pd (II)/PPh₃) used. The pre‐synthesized complexes were faster than their in situ counterparts, as the latter require an induction time to form the Pd/P^N species. The structure and electronic properties of the ligand P^N can influence both the activity and the selectivity of the reaction, stabilizing the acyl‐palladium intermediates formed in a better manner.     

Decomposition of no on Pd and Ir. Comparison with Pt and Rh

The unimolecular decomposition of NO has been examine on Pd and Ir and they are compared with the corresponding reactions on Pt and Rh. The runs were carried out in a differential flow reactor, at pressures from 0.01 to 5 Torr and temperatures from 500 to 1800 K. It was found that all rates of product formation could be described by Langmuir-Hinshelwood unimolecular rate expression, with an accuracy of±20% und all conditions. The decomposition of NO was virtually identical on Pt and Pd, and on Rh and Ir, but varied widely with temperature between these two groups of metals.     

Thermodynamically Favourable States in the Reaction of Nitrogenase without Dissociation of any Sulfide Ligand

We have used combined quantum mechanical and molecular mechanical (QM/MM) calculations to study the reaction mechanism of nitrogenase, assuming that none of the sulfide ligands dissociates. To avoid the problem that there is no consensus regarding the structure and protonation of the E₄ state, we start from a state where N₂ is bound to the cluster and is protonated to N₂H₂, after dissociation of H₂. We show that the reaction follows an alternating mechanism with HNNH (possibly protonated to HNNH₂) and H₂NNH₂ as intermediates and the two NH₃ products dissociate at the E₇ and E₈ levels. For all intermediates, coordination to Fe6 is preferred, but for the E₄ and E₈ intermediates, binding to Fe2 is competitive. For the E₄, E₅ and E₇ intermediates we find that the substrate may abstract a proton from the hydroxy group of the homocitrate ligand of the FeMo cluster, thereby forming HNNH₂, H₂NNH₂ and NH₃ intermediates. This may explain why homocitrate is a mandatory component of nitrogenase. All steps in the suggested reaction mechanism are thermodynamically favourable compared to protonation of the nearby His-195 group and in all cases, protonation of the NE2 atom of the latter group is preferred.     

Facile Assembly of Benzo[b]naphtho[2,3‐d]azocin‐6(5 H)‐ones by a Palladium‐Catalyzed Double Carbometalation

The palladium‐catalyzed reaction of 2‐alkynylanilines with 2‐(2‐bromobenzylidene)cyclobutanone as an efficient route to 7,8‐dihydrobenzo[b]naphtho[2,3‐d]azocin‐6(5 H)‐ones was developed. The fused eight‐membered ring was constructed conveniently. During the reaction process, double carbometalation was involved, which resulted in excellent selectivity with the formation of three new bonds. This transformation is highly efficient and leads to fused polycycles in good to excellent yields with good functional group tolerance.     

Stereoselective Synthesis of Functionalized Pyrrolidines by the Diverted N−H Insertion Reaction of Metallocarbenes with β‐Aminoketone Derivatives

A highly stereoselective route to functionalized pyrrolidines by the metal‐catalyzed diverted N?H insertion of a range of diazocarbonyl compounds with β‐aminoketone derivatives is described. A number of catalysts (rhodium(II) carboxylate dimers, copper(I) triflate, and an iron(III) porphyrin) are shown to promote the process under mild conditions to give a wide range of highly substituted proline derivatives. The reaction starts as a metallocarbene N?H insertion but is diverted by an intermolecular aldol reaction.