Comparison between the adsorption behaviors of an organic cation and an organic anion on several reversed-phase liquid chromatography adsorbents

Adsorption data of an organic cation (propranololium chloride) and an organic anion (sodium 1-naphthalene sulfonate) were measured by frontal analysis on two RPLC adsorbents, Symmetry-C18 and XTerra-C18, with aqueous solutions of methanol as the mobile phases. The influence of supporting neutral salts on the adsorption behavior of these two ions are compared. The Henry constants are close (H approximately 5). The four sets of isotherm data are all well accounted for using the bi-Moreau model. However, the isotherms of the two ions behave differently at high concentrations. The initial behaviors of all the isotherms are antilangmuirian but remain so in a much wider concentration range for the cation than for the anion, due to its stronger adsorbate-adsorbate interactions on the low-energy adsorption sites. The retention times of both ions increase with increasing concentration of neutral salt in the mobile phase, suggesting the formation of ion-pair complexes, with Cl- for the cation and with Na+ for the anion. The adsorbate-adsorbate interactions vanish in the presence of salt and the bi-Moreau isotherm model tends toward a bi-Langmuir model. Differences in adsorption behavior are also observed between the cation and the anion when bivalent inorganic anions and cations, respectively, are dissolved in the mobile phase. High concentration band profiles of 1-naphthalene sulfonic acid are langmuirian, except in the presence of a trivalent cation, while those of propranolol are antilangmuirian under certain conditions even with uni- or divalent cations.     

Elucidating the Coordination Chemistry and Mechanism of Biological Nitrogen Fixation

How does the enzyme nitrogenase reduce the inert molecule N₂ to NH₃ under ambient conditions that are so different from the energy‐expensive conditions of the best industrial practices? This review focuses on recent theoretical investigations of the catalytic site, the iron–molybdenum cofactor FeMo‐co, and the way in which it is hydrogenated by protons and electrons and then binds N₂. Density functional calculations provide reaction profiles and activation energies for possible mechanistic steps. This establishes a conceptual framework and the principles for the coordination chemistry of FeMo‐co that are essential to the chemical mechanism of catalysis. The model advanced herein explains relevant experimental data.     

Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

O-取代苯基-O-(2-硬脂酰胺基)乙基-N,N-二(2-氯乙基)磷酰胺的合成和生物活性

N-脂肪酰基乙醇胺(NAE)作为植物体内的一种内源物质, 在调节植物生长方面起着重要作用. 为了弥补其分子结构中长的脂肪链所带来的溶解性能以及在植物体内传导性能的缺陷, 我们将N-硬脂酰乙醇胺(NAE18)引入氮芥磷酸酯中, 合成了一系列标题化合物. 在合成工作中发现: 在NAE18与氮芥芳基磷酰氯的反应过程中, 4-二甲氨基吡啶(DMAP)起着关键性的催化作用. 在不加DMAP的相同实验条件下, 反应不能进行. 对所合成的标题化合物进行了植物生长调节和杀菌活性的测定, 初步生测结果表明: 经过结构修饰后, 大多数目标化合物的活性相对NAE18有所增强, 但有关生物活性仍有待进一步研究.     

Comparison between adsorption isotherm determination techniques and overloaded band profiles on four batches of monolithic columns

The adsorption isotherms of 4-tert.-butyl phenol were measured on four different monolithic columns, using three different techniques, classical frontal analysis (FA), the perturbation on a plateau method (PP) and the recently introduced numerical procedure known as the inverse numerical method (IN). This last approach requires only the recording of a few overloaded profiles and has the potential advantage of affording a dramatic decrease of the amounts of compounds, solvent, and time needed to determine accurate estimates of the coefficients of the isotherm. The reproducibility of the adsorption data measured on the four columns is discussed with reference to the specific techniques used for obtaining these data and to the most suitable equation used for modeling them. The data obtained for the different columns were highly consistent. The inverse numerical approach was confirmed to provide a powerful, accurate, and economic method for measuring single component adsorption data.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.     

多肽合成中羧基活化方法的一些新进展

本文简要叙述了多肽合成中的羧基活化问题。重点讨论了作者近年来在此领域所进行的工作,如含氮杂环作为活化羧基的离去基团和几个新的含磷多肽试剂。     

Microwave‐Assisted Palladium‐Catalyzed Direct Arylation of 1,4‐Disubstituted 1,2,3‐Triazoles with Aryl Chlorides

Treatment of 1,4‐disubstituted 1,2,3‐triazoles with aryl chlorides in the presence of potassium carbonate under palladium catalysis and microwave irradiation at 250 °C for 15 min leads to arylation of the triazole at the 5‐position. A variety of functional groups, including ester and hydroxy groups, are compatible. The procedure is suitable for the regioselective preparation of trisubstituted triazoles. Microwave irradiation accelerates the reaction, thus allowing the rapid synthesis of trisubstituted triazoles, which are difficult to synthesize selectively.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Thermodynamics of formation of nitrogen bases and d-ribose from mineral substances in light of the problem of origination of simplest elements of living matter

The paper represents a further development of our hydrate hypothesis of simplest living matter origination (SLMO) from inorganic and simplest organic mineral substances. It is supposed that the sources of SLMO are simplest aliphatic hydrocarbons, niters, and phosphates. Thermodynamic calculations demonstrating a principal possibility for simultaneous syntheses of different nitrogen bases, d-ribose, and desoxy-d-ribose from these source substances are presented. The most probable principal mechanism of SLMO and the principal conditions necessary for realization of the proposed chemism of SLMO in the framework of the proposed mechanism are considered. A principal means for testing the hypothesis is proposed.