Addition of Nitrile Oxides to N-Allylsaccharin

The addition of nitrile oxides to N-allylsaccharin has been studied and it has been shown that the reaction occurs regiospecifically to form a 5-substituted isomer. The molecular structure of 2-{ 5-[(3-methyl)isoxazolin-2-yl]methyl}-3-oxo-2,3-dihydrobenz[d]isothiazole 1,1-dioxide has been determined by X-ray analysis. A feature of the crystal of this compound is the presence of a supersymmetrical crystalline structure with two independent molecules associated by a center of pseudoinversion.Dedicated to Professor V. I. Minkin on the occasion of his anniversary__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 450–456, March, 2005.     

Di(propargyl)nitramine: synthesis and reactivity

An improved synthesis of (propargyl)nitramine and its pioneering conversion to di(propargyl)nitramine involve the alkylation of NH nitramines with propargyl halides or tosylate as the key steps. The standard (p° = 0.1 MPa) molar enthalpy of formation at 298.15 K for di(propargyl)nitramine was determined from the experimental standard molar energy of combustion in oxygen, measured by static bomb combustion calorimetry. Propargyl nitramines are suitable substrates for 1,3-dipolar cycloaddition reactions with azides, nitrile oxides and diazo compounds.     

Cobalt(III)-catalyzed cycloaddition polymerization of diynes with nitriles: Synthesis of polymers containing pyridine moieties in the main chain

The synthesis of pyridine-containing polymers was carried out by the cycloaddition of diynes with nitriles in the presence of organocobalt complexes as catalysts. As a model experiment, the pyridine-formation reaction of monofunctional acetylenes with nitriles was reexamined in detail in the presence of organocobalt catalysts, from which the combination of terminal aliphatic acetylenes and aromatic nitriles was proved to be suitable for the specific pyridine-formation process. On the basis of this result, the polymerization of terminal aliphatic diynes with aromatic nitriles was carried out in the presence of the cobalt catalyst (10 mol %) to give polymers containing substituted pyridine moieties in the main chain in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1979–1986, 1999     

甲基丙烯酸镁增强氢化丁腈橡胶的结构与形态和性能

用不同份量的甲基丙烯酸镁(MgMA)作增强剂,过氧化二异丙苯(DCP)作硫化剂,通过混炼和硫化过程的原位聚合制备了氢化丁腈橡胶/聚甲基丙烯酸镁(HNBR/PMgMA)纳米复合材料,用XRD、FTIR1、3C-NMR、SEM、TEM、DMA和交联密度分析等方法研究了其结构、形态和性能,并阐述了MgMA改性HNBR的相关机理.结果表明,MgMA在混炼过程中粒径明显变小,部分达到纳米级.硫化过程中发生原位自由基聚合,并部分接枝到HNBR分子链上,HNBR硫化胶和PMgMA有可能形成接枝互穿聚合物网络(接枝IPN).随着MgMA用量的增加,纳米复合材料硫化胶的定伸应力、拉伸强度、扯断伸长率、撕裂强度和热氧老化性能逐渐提高.当MgMA含量为30份时,体系的拉伸强度和扯断伸长率分别为38.5MPa和545%,并具有优异的热空气老化性能.MgMA能明显增加HNBR复合材料的储能模量,并降低其损耗因子.随着MgMA用量的增加,纳米复合材料硫化胶的总交联密度(Ve)和离子键交联密度(Ve2)增加,而共价键交联密度(Ve1)下降,表明离子键对HNBR/PMgMA纳米复合材料的力学性能起重要作用.     

1,3-Dipolar cycloaddition reaction of aryl nitrile oxides with alkenes using imidazole and pyridine containing reusable polymeric base catalysts

Cross-linked poly-1-(4-vinylbenzyl)imidazole and cross-linked poly-4-vinylpyridine have been prepared from respective vinyl monomers using different quantities of divinylbenzene as a cross-linker by radical polymerization. The polymeric bases were characterized by FT-IR, TGA, field emission-scanning electron microscopy (FE-SEM), and Brunauer-Emmett-Teller (BET) surface area analysis. Their swelling behavior was also studied. They were used as base catalysts for 1,3-dipolar cycloaddition reaction of aryl nitrile oxides, generated in situ from N-hydroxyimidoyl chloride, with N-phenylmaleimide and ethyl acrylate, to obtain 3-arylisoxazolines. Both the bases gave excellent results. These polymers were reusable, safe to use, and provided good alternative for organic nonreusable bases like pyridine and triethylamine which are hazardous.     

Fatigue crack propagation and related failure in modified,andhydride-cured epoxy resins

The fatigue crack propagation (FCP) of neat and modified, anhydridecured epoxy resin (EP) was studied in tensile-tensile mode at ambient temperature. As modifiers, liquid carboxyl-terminated acrylonitrile-butadiene (CTBN) and silicon rubber (SI) dispersions were used. The latter modifier in a defined particle size distribution was produced by a special latex technology, whereas the former developed in situ in the EP by phase separation during curing. The dispersion-type morphologies of the EPs were characterized by using polished sections and viewing them in a scanning electron microscope (SEM). The resulting frequency distribution curves were compared with those analyzed from fatigue fracture surfaces. Probable failure mechanisms were also studied by SEM-fractography.Both modifiers improved the resistance to FCP by shifting the curves to higher stress intensity factor ranges (K) in relation to the reference curve determined for the neat EP-matrix. The failure mechanisms, summarized also schematically, differed basically for the various modifiers. According to this, rubber-induced cavitation and shear yielding of the matrix seemed to be dominant for CTBN, which did not affect the principal crack plane. In contrast to this, crack bifurcation, branching and, hence, a forced deviation in the fatigue crack path induced by debonded SI-particles in the EP-matrix were concluded for the SI modifier. The common use of both modifiers yielded a positive synergistic effect due to the superposition of the above failure mechanisms.Dedicated to the 60th birthday of Prof. H. H. Kausch     

Iron‐Catalyzed Dehydration of Aldoximes to Nitriles Requiring Neither Other Reagents Nor Nitrile Media

The dehydration of aldoximes is an environmentally benign reaction affording the desired nitrile and water as a by‐product. However, most of the reported catalytic dehydration reactions of aldoximes require a solvent containing nitrile to synthesize the corresponding nitrile compounds. Inspired by recent reports on the enzymatic synthesis under nitrile‐free conditions, we here describe that a simple iron salt catalyzes the dehydration of aldoximes requiring neither other reagents nor nitrile media. Our method can be applied to the one‐pot synthesis of nitiriles from aldehydes.     

Nitriles with High Gas-Phase Basicity—Part II Transmission of the Push–Pull Effect through Methylenecyclopropene and Cyclopropenimine Scaffolds Intercalated between Different Electron Donor(s) and the Cyano N-Protonation Site

This work extends our earlier quantum chemical studies on the gas-phase basicity of very strong N-bases to two series of nitriles containing the methylenecyclopropene and cyclopropenimine scaffolds with dissymmetrical substitution by one or two electron-donating substituents such as Me, NR₂, N=C (NR₂)₂, and N=P (NR₂)₃, the last three being strong donors. For a proper prediction of their gas-phase base properties, all potential isomeric phenomena and reasonable potential protonation sites are considered to avoid possible inconsistencies when evaluating the energetic parameters and associated protonation or deprotonation equilibria B + H⁺ = BH⁺. More than 250 new isomeric structures for neutral and protonated forms are analyzed. The stable structures are selected and the favored ones identified. The microscopic (kinetic) gas-phase basicity parameters (PA and GB) corresponding to N sites (cyano and imino in the cyclopropenimine or in the substituents) in each isomer are calculated. The macroscopic (thermodynamic) PAs and GBs, referring to the isomeric mixtures of favored isomers, are also estimated. The total (pushing) substituent effects are analyzed for monosubstituted and disubstituted derivatives containing two identical or two different substituents. Electron delocalization is examined in the two π–π conjugated transmitters, the methylenecyclopropene and cyclopropenimine scaffolds. The aromatic character of the three-membered ring is also discussed.