Towards a fully optimised organic LED device: Analysis of surface synthesis using coupling reactions by ToF-SIMS

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and polarisation-modulation reflection-absorption infrared spectroscopy (PM-RAIRS) have been used to monitor the surface synthesis of self-assembled aromatic π-conjugated molecular wires on gold substrates as a step towards a novel structure for organic electroluminescent devices (OLEDs). The wires have been synthesised using a series of Schiff's base coupling reactions in solution on a self-assembled monolayer of an aromatic thiolate anchor. ToF-SIMS and PM-RAIRS measurements have demonstrated that: (i) the anchor molecules self-assemble at the gold surface, (ii) the anchor molecules selectively react through imino coupling reactions with additional wire units with high efficiency and (iii) the wire-like structure is predominantly orientated normal to the surface.     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

甲基百里(香)酚蓝新负载树脂的特 性及应用

本文以金属指示剂甲基百里(香)酚蓝作为鳌合剂制得具有相应鳌合基团的负载树脂.研究了该树脂的某些分析特性及其在富集天然水中微量铜、钻、镍、锌中的应用.     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

Synthesis and characterization of a novel nano-scale magnetic solid base catalyst involving a layered double hydroxide supported on a ferrite core

A nano-scale magnetic solid base catalyst MgAl-OH-LDH/MgFe₂O₄ (where LDH denotes layered double hydroxide) composed of MgAl-OH-LDH Brønsted base catalytic layers coated on MgFe₂O₄ spinel cores has been prepared. A magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ was prepared by a method involving separate nucleation and aging steps, and subsequently calcined to give a mixed metal oxide composite MgAl(O)/MgFe₂O₄ which was rehydrated to give MgAl-OH-LDH/MgFe₂O₄. The structure and magnetic properties of the nano-scale magnetic solid base MgAl-OH-LDH/MgFe₂O₄, together with those of the magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ and MgFe₂O₄ were characterized by XRD, XPS, low temperature N₂ adsorption and vibrating sample magnetometry (VSM). The MgAl-OH-LDH/MgFe₂O₄ composite possesses a mesoporous structure with pore size ranging from 2 to 20 nm with particle size mainly in the range 35-130 nm. The catalytic properties of MgAl-OH-LDH/MgFe₂O₄ were evaluated using the self-condensation of acetone at 273 K as a probe reaction. The results showed that the conversion of acetone to diacetone alcohol reached the thermodynamic equilibrium value of 23% at 273 K. The catalyst was easily recovered through application of an external magnetic field, and when the reclaimed catalyst was used in a second run for the same reaction, the reactivity remained unchanged.     

60keV质子辐照对TiNi记忆合金薄膜马氏体相变的影响

 利用磁控溅射的方法在氧化后的单晶Si基片上制备了TiNi形状记忆合金薄膜，利用示差扫描量热法和原位X射线衍射研究了薄膜的马氏体相变特征。通过60keV质子注入（辐照）薄膜样品研究了H+离子对合金薄膜马氏体相变特征的影响，结果表明氢离子注入后引起了马氏体相变开始Ms和结束点Mf以及逆马氏体相变开始As和结束温度Af的下降，而对R相变开始Rs和结束温度Rf影响不大。掠入射X射线衍射表明H+离子注入后有氢化物形成。H⁺离子注入形成的氢化物是引起相变点的变化的主要因素。     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

NMR studies on a palladium(II) complex containing an incompletely coordinated facultative pentadentate Schiff base ligand

Palladium(II) dichloride reacts with 1,10‐bis(2‐pyrrolyl)‐2,5,9‐triaza‐1,9‐decadiene to give a [Pd(C₁₅H₂₀N₅)]Cl complex in which the ligand is four‐coordinated, leaving one pyrrole group dangling. By using COSY, gHSQC, gHMBC connectivities and NOE experiments it has been concluded that one linkage isomer exists in DMSO solution, in spite of the fact that different sets of N atoms of potentially pentadentate ligand might be involved in coordination, and that the three chelate rings in the complex cation are arranged in a sequence: five‐membered, six‐membered, five‐membered which is different from that (5–5–6) found by x‐ray studies on the related [Ni(C₁₅H₂₀N₅)]Cl compound. NMR studies allowed an unambiguous assignment of all ¹H and ¹³C NMR resonances for the complex. Results of x‐ray structural analysis of [Pd(C₁₅H₂₀N₅)](CH₃COO)H₂O supported the five‐membered, six‐membered, five‐membered ring sequence in the [Pd(C₁₅H₂₀N₅)]⁺ complex cation and show an E (trans) orientation of the dangling pyrrole group with respect to the metal center. Copyright © 2002 John Wiley & Sons, Ltd.     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003