乙基苯乙烯与二乙烯苯球形共聚物吸附树脂作反相薄层色谱固定相

本文合成了乙基苯乙烯与二乙烯苯球形共聚物PED－9吸附树脂，粒径3～7μm，用作薄层色谱固定相，对板效进行了研究，并通过分离实例说明它对硝基苯酚及芳胺具有优良的分离性能。     

Preconcentration and Separation Procedures for the Spectrochemical Determination of Platinum and Palladium

Low concentrations of Pt and Pd in industrial (µgg^–1 level) and environmental samples (ngg^–1 level) together with the complexity of the matrix causing many interferences during the determination of noble metals often require elaboration and application of pre-concentration/matrix separation procedures before detection of the analyte. Different pre-concentration/matrix separation procedures applied prior to the determination of Pt and Pd by atomic spectrometric techniques are reviewed and critically compared taking into account potential interferences. The methods studied are divided into 5 groups including precipitation and coprecipitation, liquid–liquid extraction, solid phase extraction, electrochemical pre-concentration and biosorption. The main analytical problems occuring during sample preparation and storage are discussed.     

Cross-linking epoxide resins with hydrolysates of chrome-tanned leather waste

Differential scanning calorimetry was employed to investigate the reaction of diglycidyl ethers of bisphenol A (DGEBA) of mean molecular mass 348–480 Da, with collagen hydrolysate of chrome-tanned leather waste in a solvent-free environment. The reaction leads to biodegradable polymers that might facilitate recycling of plastic parts in products of the automotive and/or aeronautics industry provided with protective films on this basis. The reaction proceeds in a temperature interval of 205–220°C, at temperatures approx. 30–40°C below temperature of thermal degradation of collagen hydrolysate. The found value of reaction enthalpy, 519.19 J g⁻¹ (= 101.24 kJ mol⁻¹ of epoxide groups) corresponds with currently found enthalpy values of the reaction of oxirane ring with amino groups. Reaction heat depends on the composition of reaction mixture (or on mass fraction of diglycidyl ethers in the reaction mixture); proving the dependence of kinetic parameters of the reaction (Arrhenius pre-exponential factor A (min⁻¹) and activation energy E _a (kJ mol⁻¹)) did not succeed. Obtained values of kinetic parameters are on a level corresponding to the assumption that reaction kinetics is determined by diffusion.     

Influence of silica fillers during the electron irradiation of DGEBA/TETA epoxy resins, part II: Study of the thermomechanical properties

This work describes the influence of silica fillers on the thermomechanical properties of diglycidyl ether of bisphenol A/triethylenetetramine (DGEBA/TETA) epoxy resins during ageing under electron beam irradiation. Whatever be the silica filler (pure micrometric ground and spherical silicas, nanometric silicas and coupling agent treated silicas), the glass transition temperature of the epoxy resins decreases with increasing irradiation dose, meaning that the main effect of the irradiation is chain scission. No influence of the silica fillers has been detected from the changes in the glass transition temperature with the increase in the irradiation dose. The disappearance of the cooperativity of the γ relaxation, the decrease of the α relaxation and the decrease of the elastic modulus at the rubbery plateau observed by dynamic mechanical analyses involve a decrease in the crosslink density of the epoxy resins. The occurrence of chemical reactions between the epoxy resin and the silica surface at high irradiation doses has been shown. Moreover, we show evidence that chemical reactions between the epoxy resin and the silica surface occur at high irradiation dose.     

Effect of Hyperbranched Polyester on Modification of Epoxy Resins Cured with Anhydride

Epoxy resins are widely used in coatings, adhesives and polymer composites, but the applications of cured epoxy resins are often restricted by their poor toughness. HBP can be used as toughener to improve the toughness of epoxy resins due to its high-dens…     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.     

A convenient synthesis of enantiopure (4aS,7aR)-1,4,4a,7a-tetrahydrocyclopenta[c]pyran-3,7-dione

1. Download : Download high-res image (69KB)
2. Download : Download full-size image

     

Analytical characterization of diterpenoid resins present in pictorial varnishes using pyrolysis-gas chromatography-mass spectrometry with on line trimethylsilylation

A procedure based on the technique of the pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) has been applied, in this work, in order to determine the composition of diterpenoid resin employed in art works. The method is based on the on line derivatization of these resins using hexamethyldisilazane (HMDS). Results obtained were compared with those previously reported in literature from Venice turpentine, Strasbourg turpentine, colophony, sandarac and Manila copal using this same method and with those others from in situ thermally assisted hydrolysis and methylation with tetramethylammonium hydroxide (TMAH). Canada balsam, copper resinate and Copaiba balsam have been also analyzed extending the scope of this method in the field of the analysis of artwork materials. Several non-reported trimethylsilylated derivatives of compounds present in the diterpenoid resins have been identified. An improvement in sensitivity has been obtained by using HMDS as derivatizing reagent, together with a better resolution of the most representative peaks. Additionally, this method reduces the number of pyrolytic fragmentation, recombination, dehydration and isomerization products formed during the pyrolysis process and, in consequence, more simplified chromatograms are obtained. Finally, the reported procedure has been successfully used for characterizing two diterpenoid resin-based varnishes present in the canvas painting "The Betrothal of the Virgin" (Anonymous, 17th century) which is included in the pictorial collection of Saint Joseph Church in Taormina (Italy) and the Magdalena Tryptich (Master of Alzira, 16th century, Valencia, Spain).     

Sorption of binary liquid mixtures on polymer networks Part I. Determination of surface excess isotherms and free energy functions

Two groups of polymer networks (polymer resins) are investigated by selective liquid sorption fromn-propanol-water mixtures. Group 1 consists of gel polymerized polar (hydrophilic) ion exchangers which swell in the binary liquid mixture. Group 2 consists of non-polar, non-swelling, macroporous resins. The free energy isotherms accompanying the sorption processes are calculated from the excess isotherms and the bulk activities. The adsorption excess free energies reveal the differences in polarity of the polymer network.     

Improving resins for solid phase synthesis: incorporation of 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene

The preparation, characterisation and application of a series of non-grafted polystyrene (PS) resins containing a styrenic methoxypoly(ethylene glycol) (MPEG) derivative is presented. These novel PS-MPEG resins were designed to balance swelling and solvation with improved handling. The monomer, 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene, contained an inert phenyl ether linkage designed to provide broad chemical compatibility and stability, yet imparting all the favourable properties of the PEG group into the new resin, whilst maintaining a high loading capacity. The synthetic performance of the new resins compared very favourably to those of TentaGel™, ArgoGel™ and aminomethyl PS.