Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence

Three types of resins, related to the spacer, environmental and microenvironmental models were prepared by grafting commercial AMP polymer with 2-[2-(2-aminoethylamino)-2-oxoethoxy]acetic acid. All resins were highly loaded and functionalized with Rink-amide linker. A comparative synthesis of the classic difficult sequence ACP (65-74) on the prepared resins by Fmoc/t-Bu chemistry is presented. The ‘microenviromental’ model resin afforded the crude peptide in the highest purity (98%).     

Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic

The cure kinetics of two epoxy/amine resins, Araldite 2020 and AY103-HY956 widely used as adhesives in the restoration of works of art from glass or ceramic was investigated using FTIR spectroscopy. These resins are two-part adhesives, consisting of a resin - A, based on a diglycidyl ether of bisphenol A, and a hardener - B which is either a cycloaliphatic amine (isophorone diamine) for Araldite 2020, or a mixture of three aliphatic amines in HY956. The study was based on the collection of IR spectra, in the middle range (4000-600 cm⁻¹), of mixtures of resin and hardener at different proportions and isothermal temperatures (22-70 °C) as a function of curing time. A kinetic model was employed to simulate the experimental data using two kinetic rate constants. Diffusion control was incorporated to describe the cure behaviour at high degrees of conversion. From fitting to experimental data the kinetic and diffusional parameters were estimated, together with the activation energies of the kinetic and autocatalytic rate constants. It was found that higher degrees of curing are obtained at higher temperatures and increased amounts of hardener. Differences in the performance of the two adhesives are explained based on the type of the amines used as hardener.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Water absorption of a diglycidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system

The diffusive and dynamic mechanical behavior of the DGEBA/1,3-BAC epoxy resin system was studied during water absorption. The diffusion of water was investigated at 100% relative humidity, by immersion of specimens in water at 60, 80 and 100°C. In all absorption experiments, water diffusion followed Fick's law. Diffusion coefficients and saturated water concentrations are given for these temperatures. The activation energy for diffusion was determined from the relationship between the diffusion coefficient and the reciprocal of the absolute temperature. The value obtained was 31.2 kJ mol^–1. Dynamic mechanical analysis of samples immersed in 100°C water and with various water contents showed both a shift of T_g, defined by thetan peak, to lower temperatures and a slight decrease in the dynamic modulus in the presence of water. These effects are probably a result of plasticization.This work was supported by the Xunta de Galicia through grant XUGA-17201A92.     

后交联型St-DVB大孔吸附树脂对低级醇类的吸附性能研究

分别在静态和动态条件下研究了Friedel—Crafs后交联型聚苯乙烯-二乙烯基苯(St-DVB)大孔吸附树脂对水溶液中多种低级一元醇的吸附性能，测定静态吸附等温线和动态吸附曲线，并分别按照Langmuir和Freundlich模型进行拟合．结果显示，树脂对水中低浓度低级一元醇的吸附过程属于放热的物理吸附过程，树脂吸附能力随着一元醇碳原子数的增加，即分子内疏水基团质量的增加而增加；树脂对直链醇的吸附能力稍强于同分异构的支链醇．     

大孔树脂吸附法处理含苯肼工业废水的研究

以Hz-841大孔树脂为吸附剂,95%乙醇为脱附剂处理含苯肼4000~5000mg/L的工业废水,取得了理想的分离效果,苯肼吸附率>99.8%,树脂工作吸附量40~50g/L。     

以硫醚为主链的螯合树脂研究Ⅰ.4-氨基安替吡啉树脂和乙基原磺酸基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物与4－氨基安替吡啉（4AAP）或乙基原磺酸钾（PEA）反应，制得四种侧链带氨基安替吡啉，乙基原碘酸基的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。并通过X－射线光电子能谱初步探讨了树脂对金属离子的螯合作用。     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.     

X-Ray Powder Diffraction Studies of Polyhydrates of Cross-Linked Tetraisoamylammonium Polyacrylates

X-ray powder diffraction studies were performed of the polyhydrates, formed at positive temperature in swelled grains of carboxylic cation-exchange resins in the form of tetraisoamylammonium (cross-linked tetraisoamylammonium polyacrylates, differing in the degree of cross-linking: 1, 2 and 3%). It was shown that the polyhydrates exist as the crystalline phase under specific conditions, determined earlier by DTA technique. Diffraction patterns of the samples, recorded at the temperature +3 ± 1 °C, indicate that the polyhydrates crystallize in hexagonal symmetry, the unit cell parameters are close to a=12.25 Å, c=12.72 Å and do not depend significantly upon the degree of cross-linking. The suppositions were made concerning the size of hydrate crystallites, formed in the swelled grains of the studied resins.This revised version was published online in July 2005 with a corrected issue number.     

以硫醚为主链的螯合树脂研究Ⅳ．含硫代硫酸根、叠氮基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物分别与硫代硫酸钠，叠氮化钠反应，制得四种侧链带有硫代硫酸根或叠氮基的新型螯合树脂。它们对贵金属离子具有较高的吸附容量和较好的吸附选择性。