Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Effect of gap and flow orientation on two-phase flow in an oil-wet gap: Relative permeability curves and flow structures

Naturally fractured reservoirs contain about 25–30% of the world supply of oil. In these reservoirs, fractures are the dominant flow path. Therefore, a good understanding of transfer parameters such as relative permeability as well as flow regimes occurring in a fracture plays an important role in developing and improving oil production from such complex systems. However, in contrast with gas–liquid flow in a single fracture, the flow of heavy oil and water has received less attention. In this research, a Hele-Shaw apparatus was built to study the flow of water in presence of heavy oil and display different flow patterns under different flow rates and analyze the effect of fracture orientations on relative permeability curves as well as flow regimes. The phase flow rates versus phase saturation results were converted to experimental relative permeability curves. The results of the experiments demonstrate that, depending on fracture and flow orientation, there could be a significant interference between the phases flowing through the fracture. The results also reveal that both phases can flow in both continuous and discontinuous forms. The relative permeability curves show that the oil–water relative permeability not only depends on fluid saturations and flow patterns but also fracture orientation.     

Dielectric properties of selected laterally fluoro-substituted 4,4′′-dialkyl,dialkoxy and alkyl-alkoxy [1:1′;4′:1′′]terphenyls

Measurements of the complex permittivity, ε*?=?ε′ – iε″, within the frequency range 200 Hz to 10 MHz for 15 laterally fluoro-substituted terphenyls have been conducted. In most cases the substances exhibited the nematic phase over a broad temperature range. All substances were characterised by negative dielectric anisotropy, and are potentially useful for vertical alignment mode systems. The static permittivity tensor components have been analysed in relation to the dipole structure of the molecules. Dielectric relaxation processes observed in the liquid crystalline (LC) and solid rotator (R) phases (obtained by slow cooling of the samples) are characterised by calculation of the relaxation times and activation barriers. The rotation motions around the short axes are typical for LC phases, whereas rotations about the long axes, accompanied in some cases by internal motions, are present in the R phase.     

Determination of fexofenadine in Hank's balanced salt solution by high‐performance liquid chromatography with ultraviolet detection: application to Caco‐2 cell permeability studies

The drug‐transporting proteins can affect the pharmacokinetics and pharmacodymanics of many drugs, resulting in an erratic and unpredictable pharmacological response. The Caco‐2 monolayer is routinely applied to investigate the carrier‐mediated transport of drugs. Therefore, the selection of a marker compound able to characterize the activity of such transporters is crucial. Fexofenadine (FEX), a P‐gp/OATP substrate, can be considered a suitable probe. However, in order to use be used as a marker compound, it is mandatory to develop an analytical method able to quantify this drug during the in vitro permeability assay. An HPLC method with ultraviolet detection was developed; the mobile phase consisted of phosphate buffer (pH 3.2) containing 10 m m of sodium octanosulphonate and acetonitrile (60:40) and the flow rate was set at 1.2 mL/min. Fexofenadine was eluted at 40°C, the retention time was about 4.6 min. The LOD and LOQ values were 1.9 and 6.2 ng/mL, respectively. Verapamil and ketoconazole, the most common P‐gp inhibitors, were eluted as distinct peaks of that corresponding to fexofenadine The method was successfully applied to quantify the amount of FEX transported across the Caco‐2 monolayer and could be an additional tool for those investigating the role of membrane transporters on drug absorption. Copyright © 2014 John Wiley & Sons, Ltd.     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

Chemoselective Hydrogenation of 6-Alkynyl-3-fluoro-2-pyridinaldoximes: Access to First-in-Class 6-Alkyl-3-Fluoro-2-pyridinaldoxime Scaffolds as New Reactivators of Sarin-Inhibited Human Acetylcholinesterase with Increased Blood–Brain Barrier Permeability

Novel 6-alkyl- and 6-alkenyl-3-fluoro-2-pyridinaldoximes have been synthesised by using a mild and efficient chemoselective hydrogenation of 6-alkynyl-3-fluoro-2-pyridinaldoxime scaffolds, without altering the reducible, unprotected, sensitive oxime functionality and the C−F bond. These novel 6-alkyl-3-fluoro-2-pyridinaldoximes may find medicinal application as antidotes to organophosphate poisoning. Indeed, one low-molecular-weight compound exhibited increased affinity for sarin-inhibited acetylcholinesterase (hAChE) and greater reactivation efficiency or resurrection for sarin-inhibited hAChE, compared with those of 2-pyridinaldoxime (2-PAM) and 1-({[4-(aminocarbonyl)pyridinio]methoxy}methyl)-2-[(hydroxyimino)methyl]pyridinium chloride (HI-6), two pyridinium salts currently used as antidote by several countries. In addition, the uncharged 3-fluorinated bifunctional hybrid showed increased in vitro blood–brain barrier permeability compared with those of 2-PAM, HI-6 and obidoxime. These promising features of novel low-molecular-weight alkylfluoropyridinaldoxime open up a new era for the design, synthesis and discovery of central non-quaternary broad spectrum reactivators for organophosphate-inhibited cholinesterases.     

Ocimum basilicum seed mucilage reinforced with montmorillonite for preparation of bionanocomposite film for food packaging applications

Use of nanocomposites is a well-established approach in enhancing the mechanical and barrier properties of bionanocomposite film for food packaging applications. The seed mucilage of Ocimum basilicum was employed for the preparation of bionanocomposite films with montmorillonite (MMT) as nanofiller. The films were prepared by solvent-casting method at varied solution pH (1, 3, 5 and 9) and MMT loading (1%, 3%, 5%, 10%, 15% and 20%). The films were characterized for physical, mechanical and barrier properties in addition to microstructure and X-ray diffraction pattern. XRD analysis revealed the exfoliated dispersion of MMT at pH 9, confirming its effective interaction with the bionanocomposite film. Maximum film tensile strength was achieved at a lower MMT load of 5%. Water vapour permeability reduced with increase in MMT loading up to 5%, followed by an increase at higher MMT loadings. Film formed at pH 9 showed tensile strength of 17.3 ± 0.33 MPa and reduced water vapour permeability (WVP) of 0.21 g mm.m⁻².hr⁻¹.kPa⁻¹.     

Review on ionization and quenching mechanisms of Trichel pulse

Trichel pulse is a kind of pulsed mode in negative DC corona discharge, which has attracted significant attention because of its considerable applications in industry. Over eighty years, plenty of effort including simulations and experiments has been spent to reveal the ionization and quenching mechanisms of Trichel pulse. By revisiting and summarizing the basic characteristics and well-accepted ionization and quenching mechanisms, this review provides a basic understanding and the current status of Trichel pulse.