纳米Si/SiO2多层膜的结构表征及发光特性

采用等离子体化学气相沉积系统生长非晶硅薄膜并用原位等离子体氧化的方法制备出具有不同子层厚度的非晶Si/SiO₂多层膜,然后利用限制性晶化原理使非晶硅层晶化生成纳米硅。利用Raman、TEM等手段对薄膜结构进行了系统表征,在室温下观测到了光致发光信号,其发光峰峰位在750nm附近。进而在样品上下表面蒸镀电极,构建了电致发光原型器件并观测到了室温下的电致发光谱,开启电压约为6V,有两个明显的发光带,分别位于在650nm和520nm处。初步探讨了纳米硅及纳米硅/二氧化硅界面态对发光特性的影响。     

Er3+/Yb3+共掺Gd3Sc2Ga3O12晶体的上转换发光

研究了提拉法生长的Er³⁺/Yb³⁺:Gd₃Sc₂Ga₃O₁₂和Er³⁺:Gd₃Sc₂Ga₃O₁₂晶体在室温下320—1700nm范围的吸收光谱和500—750nm范围内的上转换荧光谱,同时对其上转换荧光的可能发生机制、途径以及上转换过程可能对Er^{3+相似文献}   

红外视频图像增强处理系统设计

为红外视频图像的实时增强设计了一套可应用于空间狭小环境中的小型化图像增强处理系统。以FPGA为系统核心,并使用CPLD对系统进行配置,简化了系统设计,使处理系统硬件更加紧凑,运行更加可靠。给出了系统主要功能模块的实现方法。在红外视频图像系统中使用,图像增强效果明显。     

焦平面图像红外无线传输系统中边沿位置调制的低功耗实现

在焦平面图像红外无线传输系统中,通过引入边沿位置调制(EPM)方式来代替传统的脉冲位置调制方式,提高了传输带宽效率。提出了基于反熔丝FPGA的EPM调制低功耗实现方案,包括输入接口、缓冲器与RLL(5,12)编码状态机的设计,以及数据恢复、脉冲提取等EPM解调关键技术的解决方案。实验系统利用EPM调制方式,在24MHz带宽条件下实现了320×240像素视频数据的低功耗红外无线实时传输,促进了焦平面图像红外无线输出的进一步实用化。     

Raman and IR studies of TaWO5.5, ASbWO6 (A = K,Rb, Cs,Tl), and ASbWO6·H2O (A = H,NH4, Li,Na) pyrochlore oxides

Raman and infrared (IR) spectra of defect pyrochlores TaWO_5.5, NH₄SbWO₆·H₂O, HSbWO₆·H₂O, LiSbWO₆·H₂O, NaSbWO₆·H₂O, KSbWO₆, RbSbWO₆, CsSbWO₆, and TlSbWO₆ were measured. The obtained spectra are discussed using the factor group approach for the cubic Fd‐3m space group, and assignment of bands to respective motions of atoms is proposed. Our results show that the phonon properties of the pyrochlores are strongly affected by disorder, and therefore Raman and IR spectroscopies are very useful tools in studying disorder in this family of compounds. In particular, our studies have shown that in these ionic conductors disorder at sites occupied by NH , H⁺, or alkali‐metal ions decreases with increasing size and mass of these ions. Copyright © 2010 John Wiley & Sons, Ltd.     

Self-Assembly of 1D Double-Chain and 3D Diamondoid Networks of Lanthanide Coordination Polymers through In Situ-Generated Ligands: High-Pressure CO2 Adsorption and Photoluminescence Properties

Two new lanthanide-based coordination polymers, [Sm₂(bzz)(ben)₆(H₂O)₃]·0.5H₂O (1) and [Eu(bbz)(ben)₃] (2), were synthesized and characterized. The described products were formed from in situ-generated benzoate (ben) and N’-benzoylbenzohydrazide (bbz) ligands, which were the products of transformation of originally added benzhydrazide (bzz) under hydrothermal conditions. Compound 1 exhibits a one-dimensional (1D) double-chain structure built up from the connection of the central Sm³⁺ ions with a mixture of bzz and ben ligands. On the other hand, 2 features a 3D network with a 4-connected (6⁶) dia topology constructed from dinuclear [Eu₂(ben)₆] secondary building units and bbz linkers. High-pressure CO₂ sorption studies of activated 1 show that maximum uptake increases to exceptionally high values of 376.7 cm³ g⁻¹ (42.5 wt%) under a pressure of 50 bar at 298 K with good recyclability. Meanwhile, 2 shows a typical red emission in the solid state at room temperature with the decay lifetime of 1.2 ms.     

三缺位硅钨酸盐纳米材料的调控形貌的合成及功能化

以三缺位Keggin型硅钨酸盐为前驱体,采用化学沉淀法成功合成出2例新型纳米材料M_3SiW_9(M=Cu.,Co.)。其中,Cu_3SiW_9表现为新颖的纳米晶须形貌,Co_3SiW_9表现为尺寸均一的球形纳米颗粒。经过一系列控制实验证明,通过掺杂不同类型的金属离子可以调控M_3SiW_9的形貌。我们对产生该现象的机理进行了合理推测。此外,使用荧光素钠作为掺杂剂可使Cu_3SiW_9纳米晶须具有优良的光致发光性能,测试表明,多酸并未淬灭荧光素钠的发光,复合材料在510 nm具有明显的发射波长。最后,我们对Cu_3SiW_9纳米晶须负载CdS量子点后的光催化产氢性质进行了研究。结果表明,当Cu_3SiW_9与CdS的质量比为1∶1时,复合材料的产氢效率约为纯CdS量子点的10倍。这也证实多金属氧酸盐的存在可以有效抑制CdS量子点光生电子与空穴的复合,从而大幅提高其光解水产氢的效率。     

Syntheses and structures of two novel fluorescent metal–organic frameworks generated from a tridentate donor–acceptor motif ligand

The tridentate organic ligand 4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoic acid ( H₃L ) has been synthesized (as the methanol 1.25‐solvate, C₄₈H₃₉NO₆·1.25CH₃OH). As a donor–acceptor motif molecule, H₃L possess strong intramolecular charge transfer (ICT) fluorescence. Through hydrogen bonds, H₃L molecules construct a two‐dimensional (2D) network, which pack together into three‐dimensional (3D) networks with an ABC stacking pattern in the crystalline state. Based on H₃L and M(NO₃)₂ salts (M = Cd and Zn) under solvothermal conditions, two metal–organic frameworks (MOFs), namely, catena‐poly[[triaquacadmium(II)]‐μ‐10‐(4‐carboxyphenyl)‐4,4′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6‐diyl)dibenzoato], [Cd(C₄₈H₃₇NO₆)(H₂O)₃]_n, I , and poly[[μ₃‐4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoato](μ₃‐hydroxido)zinc(II)], [Zn₂(C₄₈H₃₆NO₆)(OH)]_n, II , were synthesized. Single‐crystal analysis revealed that both MOFs adopt a 3D structure. In I , partly deprotonated HL ^2? behaves as a bidentate ligand to link a Cd^II ion to form a one‐dimensional chain. In the solid state of I , the existence of weak interactions, such as O—H…O hydrogen bonds and π–π interactions, plays an essential role in aligning 2D nets and 3D networks with AB packing patterns for I . The deprotonated ligand L ^3? in II is utilized as a tridentate building block to bind Zn^II ions to construct 3D networks, where unusual Zn₄O₁₄ clusters act as connection nodes. As a donor–acceptor molecule, H₃L exhibits fluorescence with a photoluminescence quantum yield (PLQY) of 70% in the solid state. In comparison, the PL of both MOFs is red‐shifted with even higher PLQYs of 79 and 85% for I and II , respectively.     

Optoelectronic,Aggregation, and Redox Properties of Double-Rotor Boron Difluoride Hydrazone Dyes

We develop the chemistry of boron difluoride hydrazone dyes (BODIHYs) bearing two aryl substituents and explore their properties. The low-energy absorption bands (λ_max=427–464 nm) of these dyes depend on the nature of the N-aryl groups appended to the BODIHY framework. Electron-donating and extended π-conjugated groups cause a redshift, whereas electron-withdrawing groups result in a blueshift. The title compounds were weakly photoluminescent in solution and strongly photoluminescent as thin films (λ_PL=525–578 nm) with quantum yields of up to 18 % and lifetimes of 1.1–1.7 ns, consistent with the dominant radiative decay through fluorescence. Addition of water to THF solutions of the BODIHYs studied causes molecular aggregation which restricts intramolecular motion and thereby enhances photoluminescence. The observed photoluminescence of BODIHY thin films is likely facilitated by a similar molecular packing effect. Finally, cyclic voltammetry studies confirmed that BODIHY derivatives bearing para-substituted N-aryl groups could be reversibly oxidized (E_ox1=0.62–1.02 V vs. Fc/Fc⁺) to their radical cation forms. Chemical oxidation studies confirmed that para-substituents at the N-aryl groups are required to circumvent radical decomposition pathways. Our findings provide new opportunities and guiding principles for the design of sought-after multifunctional boron difluoride complexes that are photoluminescent in the solid state.