One Novel Vanadium-Phosphate Cluster [PV_(2.5)O_(8.5)]-3.83{H_2O} with Three-Dimensional Architecture

A novel vanadium-phosphate compound [PV_2.5O_8.5]·3.83{H_2O}(1)was obtained from the hydrothermal reac-tion and structurally characterized by elemental analysis and single-crystal X-ray diffraction,which exhibited thatthe title complex crystallized in cubic space group I-43m with crystal data:a=1.6115(1)nm,V=4.1848(1)nm~3,Z=12,D_c=1.783 g/cm~3,F(000)=2278,R_1=0.0528,and wR_2=0.1329[I>2σ(I)](all data).The basic unit of{PV_2.5O_8.5}symmetrically extended to closed sphere-like structure of{P_4V_(10)O_(34)},which was further linked to in-terleaving three-dimensional network via sharing four phosphate through μ_3-oxygen atoms around the closedsphere-like structures.     

Sequosempervirin A, a novel spirocyclic compound from Sequoia sempervirens

A novel spirocyclic compound (4R)-4-(4-hydroxy-benzyl) spiro [4,5] dec-1-en-8-ol (sequosempervirin A) was isolated from the branches and leaves of Sequoia sempervirens. Its structure and relative stereochemistry were mainly determined by MS, 2D NMR and X-ray means, which is the first naturally occurring norlignan containing one spirocycle with C6 (cyclohexane)-C2-C3-C6 skeleton.     

三接触弯曲构型的蓝移氢键CH3…Y的理论研究

运用量子化学从头算方法, 在MP2/6-311＋＋G(d,p), MP2/6-311＋＋G(2df,2p), MP2/6-311＋＋G(3df,3pd)和QCISD/6-311＋＋G(d,p)水平上, 研究了CH₃F, CH₃Cl和CH₃Br作为质子给体与Cl^－, Br^－作为质子接受体形成的氢键CH₃…Y. 计算结果表明: 6种复合物中C—H键收缩, 伸缩振动频率增大, 形成蓝移氢键. 分子中原子(Atoms in Molecules, AIM)分析表明, 这些复合物的电子密度拓扑性质与普通氢键有着本质的不同, 在Y…H之间不存在键临界点, 而在Y与C之间存在键临界点, 因此这些相互作用严格地不能称为氢键. 自然键轨道(Natural bond orbital, NBO)分析表明, 在这些复合物中弯曲的CH…Y的特殊结构使得分子间超共轭n(Y)®σ*(C—H)减小到可以忽略; 质子接受体的电子密度没有转移到σ*(C—H)上, 而是转移到了σ*(C—X) (X＝F, Cl, Br)上; 存在一定程度的重杂化; 分子内超共轭相互作用减小使得σ*(C—H)的电子密度减少. 这些因素共同导致C—H伸缩振动频率的蓝移.     

A novel boron-rich quaternary scandium borocarbosilicide Sc3.67−xB41.4−y−zC0.67+zSi0.33−w

A novel quaternary scandium borocarbosilicide Sc_3.67−xB_41.4−y−zC_0.67+zSi_0.33−w was found. Single crystallites were obtained as an intergrowth phase in the float-zoned single crystal of Sc_0.83−xB_10.0−yC_0.17+ySi_0.083−z that has a face-centered cubic crystal structure. Single crystal structure analysis revealed that the compound has a hexagonal structure with lattice constants a = b = 1.43055(8) nm and c = 2.37477(13) nm and space group (No. 187). The crystal composition calculated from the structure analysis for the crystal with x = 0.52, y = 1.42, z = 1.17, and w = 0.02 was ScB_12.3C_0.58Si_0.10 and that agreed rather well with the composition of ScB_11.5C_0.61Si_0.04 measured by EPMA. In the crystal structure that is a new structure type of boron-rich borides, there are 79 structurally independent atomic sites, 69 boron and/or carbon sites, two silicon sites and eight scandium sites. Boron and carbon form seven structurally independent B₁₂ icosahedra, one B₉ polyhedron, one B₁₀ polyhedron, one irregularly shaped B₁₆ polyhedron in which only 10.7 boron atoms are available because of partial occupancies and 10 bridging sites. All polyhedron units and bridging site atoms interconnect each other forming a three-dimensional boron framework structure. Sc atoms reside in the open spaces in the boron framework structure.     

Actin-binding marine macrolides: total synthesis and biological importance

Marine organisms produce a fascinating range of structurally diverse secondary metabolites, which often possess unusual and sometimes unexpected biological activities. This structural diversity makes these marine natural products excellent molecular probes for the investigation of biochemical pathways. Recently, a number of novel and stereochemically complex macrolides, having a large macrolactone (22- to 44-membered) ring, that interact with the actin cycloskeleton have been isolated from different marine sources. Actin, like tubulin, is a major component of the cytoskeleton and has important cellular functions. Although the details of these interactions are still under investigation, these marine macrolides are becoming increasingly important as novel molecular probes to help elucidate the cellular functions of actin. Owing to their potent antitumor activities, these compounds, for example the aplyronines, also have potential for preclinical development in cancer chemotherapy. Their appealing molecular structures, with an abundance of stereochemistry, and biological significance, coupled with the extremely limited availability from the marine sources, have stimulated enormous interest in the synthesis of these compounds. This review summarizes the biological properties of these unusual marine natural products and features the recently completed total syntheses of swinholide A, scytophycin C, aplyronine A, mycalolide A--all of these being potent cytotoxic agents that target actin--and a diastereoisomer of ulapualide A. Rather than detailing each individual step of these multistep total syntheses, the different synthetic strategies, key reactions, and methods adopted for controlling the stereochemistry are compared.     

金属有机导体、半导体和超导体

本文综述了三类金属有机固体化合物的合成、结构与导电性能。这三类化合物是金属有机电荷转移盐,金属酞菁和会属卟啉络合物,以及金属有机夹层化合物。     

The use of glass capillary columns for the analysis of polar natural products

Two published procedures for glass capillary column production are applied to produce capillaries for chromatography of polar natural compounds. Soda lime glass capillaries, after leaching with aqueous HCL, are either treated with colloidal silicic acid or with barium carbonate and coated with either Silar 7CP or SE 52. A test mixture as well as polar carbohydrate and peptide mixtures are chromatographed on the different columns and their chromatographic properties are evaluated. Combined capillary gas chromatography-electron impact and chemical ionization mass spectrometry are used for identification of the peptide sequence.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

含苯并呋喃、苯并噻吩环的聚苯基-1,2,4-三嗪

本文首次合成了几种含苯并呋喃苯并噻吩环的新的芳香族四羰基化合物,并对它们进行了元素分析和红外光谱测定。将所合成的芳族四羰基化合物分别与芳族双酰胺腙反应,得到了一系列含氧、硫杂原子的新的聚苯基-1,2,4-三嗪。这些高聚物均可以浇铸成膜。对聚合物所进行的一般性能测试的结果表明,它们具有良好的力学性能和较好的耐温性。     

Stability of Suspensions of Bioactive Particles Using Hybrid Organic–Inorganic Solutions as Dispersing Media

Functional coatings incorporating different types of particles developed by the sol–gel method have been proposed in the last few years for diverse applications. This work focuses on the preparation of homogeneous coatings prepared from stable suspensions with 10 wt% of glass and glass ceramic particles in a hybrid organic–inorganic solution as dispersing media. For this purpose, the pH was shifted up to 6–7 by adding tetrapropylammonium hydroxide (TPAH) which behaves as a cationic surfactant being probably adsorbed on the particles surface, while the sol maintains stable. Rheological measurements were performed to study the stability of the suspensions prepared at different conditions such as the kind and concentration of dispersant and the pH conditions. After sintering at 450^∘C/30 min, coatings around 2 μ m in thickness were obtained.