硫比例对Zn0.8Cd0.2S-En杂化固溶体光催化制氢性能的影响

采用溶剂热制备了具有不同厚度和大小的Zn0.8Cd0.2S-乙二胺杂化纳米片固溶体,系统地考察了制备过程中S/(Zn+Cd)摩尔比对所制备的光催化材料的组成与结构、光电性质以及亲水性能的影响。HR-TEM照片表明,随着制备体系中硫脲含量的增加,固溶体纳米片表面逐渐平整;荧光发射光谱结果表明,合适的S/(Zn+ Cd)摩尔比可以提高光催化材料光生电子和空穴的分离效率;光催化性能评价表明,制备过程中的S/(Zn+ Cd)原子比对其制氢活性有明显影响,在可见光照射下,S/(Zn+Cd)为4.75时,合成的Zn0.8Cd0.2S-En样品表现出最高的氢气产率,其可达到12100 μmol·h-1·g-1,分别是S/(Zn+Cd)为1.2和6.5时合成的Zn0.8Cd0.2S-En样品产氢量的2.2倍和1.7倍。光催化活性的提高与样品较少的表面缺陷、合适的形貌以及高光生电子和空穴分离效率有关。     

具有水下超疏油性能的MXene高效油水分离膜

基于二维材料MXene(Ti₃C₂T_x)的化学组成和纳米片状结构, 在不锈钢网上制备了具有MXene微纳结构表面的新型亲水和水下超疏油分离膜. 对于不同类型的油-水混合物, 该膜材料可实现重力驱动的高效油水分离, 收集的水中残油量小于4 mg/L, 具有高分离效率(>99.99%), 水通量高达57.52 L·m^-2·s^-1. 此外, 经高温处理和多种有机溶剂浸泡后MXene膜仍具有高效的油水分离性能, 并表现出优异的稳定性和循环性.     

介质和力场协同作用对纳米纤维素形貌结构的调控

纤维素是一种由直链多聚糖通过糖苷键连接而成的巨型线性高分子,纤维素分子链通过氢键紧密排列形成纤维素晶体.由于纤维素晶体具有优良的化学可修饰性和机械性能等优点,纳米化加工的纤维素可广泛应用于日常生活和工业生产的各个领域.本文主要介绍了本课题组在机械剪切力作用下,实现纤维素纳米化并同时进行亲水或疏水改性的研究进展,重点介绍了介质极性对纤维素分子链之间相互作用的影响,并通过改变分子链之间的相互作用来调控纳米化纤维素的形貌和亲、疏水性.提出机械外力和环境极性协同作用下,晶面导向剥离纤维素的理论.     

基于核酸外切酶Ⅲ诱导的双重信号放大与MoS2纳米片荧光碎灭性质的核酸检测方法

将核酸外切酶Ⅲ诱导的双重信号放大技术与MoS2纳米片的荧光猝灭性质结合,构建了一种高灵敏高选择性的DNA检测方法.首先设计两条末端修饰荧光基团的探针核酸(HP1和HP2).由于两条探针核酸具有3'粘性末端,使其不会被核酸外切酶Ⅲ降解,因而被吸附于MoS2纳米片而猝灭其荧光.当目标DNA存在时,会促使核酸外切酶Ⅲ启动双重信号放大反应,并将探针核酸降解成大量的不能吸附于MoS2纳米片表面的荧光碎片.在优化条件下,目标DNA浓度在0.5~6.0 pmol/L范围内与荧光信号变化呈良好的线性关系,检出限为0.28 pmol/L.与单重信号放大技术相比,本方法极大改善了分析灵敏度和检出限,且具有良好的单碱基错配区分能力.     

Cyclodextrin-graphene hybrid nanosheets as enhanced sensing platform for ultrasensitive determination of carbendazim

In this paper, cyclodextrin-graphene hybrid nanosheets (CD-GNs) for the first time have been used as an enhanced material for ultrasensitive detection of carbendazim by electrochemistry method. The peak currents of carbendazim on the GNs modified glassy carbon electrode (GNs/GCE) and the CD-GNs/GCE are increased by 11.7 and 82.0 folds compared to the bare GCE, respectively. This indicates the nanocomposite film not only shows the excellent electrical properties of GNs but also exhibits high supramolecular recognition capability of CDs. At the CD-GNs/GCE, the peak currents increase linearly with the concentration of carbendazim in the range of 5 nM-0.45 μM. The detection limit of carbendazim reached to 2 nM on the basis of the signal-to-noise characteristics (S/N = 3) and the recoveries were between 98.9% and 104.5%. The developed electrochemical sensor exhibited good stability and reproducibility for the detection of carbendazim. And the CD-GNs based electrochemical sensor was also successfully demonstrated for the detection of carbendazim in water sample with satisfactory results. Furthermore, this simple sensing platform can in principle be extended to the detection of other benzimidazole fungicide which can form host-guest complexes with cyclodextrin.     

Conducting Graphene Decorated Li3V2(PO4)3/C for Lithium‐Ion Battery Cathode with Superior Rate Capability and Cycling Stability

In this study, core‐shell structured Li₃V₂(PO₄)₃/C wrapped in graphene nanosheets has been successfully prepared. The reduction of graphene oxide and the synthesis of Li₃V₂(PO₄)₃/C are carried out simultaneously using a chemical route followed by a solid‐state reaction. The effects of conducting graphene are studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectra and electrochemical measurements. The results reveal that the graphene sheets not only form a compact and uniform coating layer throughout the Li₃V₂(PO₄)₃/C, but also stretch out and cross‐link into a conducting network around the Li₃V₂(PO₄)₃/C particles. Thus, the graphene decorated Li₃V₂(PO₄)₃/C electrode exhibits superior high‐rate capability and long‐cycle stability. It delivers a reversible discharge capacity of 178.2 mAh·g^?1 after 60 cycles at a current density of 0.1 C, and the rate performances of 176, 169.3, 156.1 and 135.7 mAh·g^?1 at 1, 2, 5 and 10 C, respectively. The superior electrochemical properties make the graphene decorated Li₃V₂(PO₄)₃/C composite a promising cathode material for high‐performance lithium‐ion battery.     

Cobalt(II)-dianthracene Frameworks: Assembly,Exfoliation and Properties

Metal-organic frameworks containing responsive organic linkers are attractive for potential applications in sensors and molecular devices. Herein we report three cobalt(II) phosphonates incorporating responsive dianthracene linkers, namely, Co₂(amp₂H₂)₂(H₂O)₄ ⋅ 6H₂O ( MDAF-1 ), Co₂(amp₂)(H₂O)₄ ⋅ 2H₂O ( MDAF-2 ) and Co(amp₂H₂) ⋅ 2H₂O ⋅ 0.5DMF ( MDAF-3 ), where amp₂H₄ is pre-photodimerized 9-anthrylmethylphosphonic acid. MDAF-1 shows a layer structure in which dinuclear Co₂(PO₃H)₂ units are inter-connected by dianthracene ligands. In MDAF-2 and MDAF-3 , inorganic chains of corner-sharing {CoO₄} (or {CoO₆}) and {PO₃C} are cross-linked by dianthracene ligands into 3D frameworks. All compounds underwent thermo-induced phase transitions, first the de-solvation and then the de-dimerization of dianthracene (as well as the release of the remaining solvent molecules for MDAF-2 and -3 ), associated with magnetic changes. MDAF-1 can be exfoliated into single-layer nanosheets in water which show light-triggered luminescent changes.     

二维纳米片用于快速高效膜法气体分离

膜法气体分离作为一类低能耗先进分离技术, 在化工分离中具有广阔的应用前景. 然而商业气体分离膜在实际应用过程中存在选择性和渗透性此消彼长的问题. 以二维纳米片材料为膜构筑基元, 有望突破这一瓶颈. 最具代表性的二维纳米片膜材料当属石墨烯及其衍生物、 二维沸石分子筛、 层状双金属氢氧化物、 二维过渡金属硫化物、 Mxene、 二维共价有机骨架和金属有机骨架材料. 本文对这些二维材料在超薄气体分离膜领域的成果与进展进行介绍, 展现了各类材料在实际分离应用过程中的优势及弊端, 探讨了二维纳米片膜材料在气体分离领域的挑战与发展前景.     

二氧化钛多孔纳米片在染料敏化太阳电池中的应用

运用连续吸附反应法和化学腐蚀-沉积法,用ZnO/FTO（氟掺杂氧化锡）多孔纳米片为模板,制备了TiO₂/FTO多孔纳米片。研究了吸附次数对形貌、光散射性能和染料敏化太阳电池性能的影响。最佳吸附次数为30,由此得到的太阳能电池的效率、短路电流密度J_sc、开路电压V_oc和填充因子FF分别为：5.57%、9.26mA·cm^-2、0.835V和72.04%。这个效率略高于P₂₅（5.32%）,但远高于ZnO（2.41%）。     

Fe-N共掺杂纳米碳材料的形貌对电化学还原反应的影响

众所周知,石墨烯片（GS）和碳纳米管是能源转化和储存应用中有效的催化剂. 然而,过渡金属基氮（N）掺杂的体系中经常形成GS和碳纳米管的复合物,使得该体系内的构效关系研究变得十分困难. 为了可控制备出含有理想物种的催化剂,作者尝试通过利用氮对碳纳米管生长的效应调节生成产物的形貌. 本文中,作者采用一步法制备了一系列Fe-N共掺杂的GS、GS/竹节碳纳米管(BCNTs)复合物及BCNTs催化剂. 为了评估碳形貌对催化剂性能的影响,作者采用氧气还原反应（ORR）及二氧化碳还原反应（CO₂RR）作为模型反应. 电化学测试结果表明,所有的样品当中仅含BCNTs的催化剂表现出最好的ORR活性（起始电位E_onset = 1.02 V_RHE）及CO₂RR活性（CO生成法拉第效率FE_CO = 91.1%,-0.6 V_RHE）. 进一步的研究表明,优异的活性与独特的BCNTs中存在的缺陷、较大的比表面积、高含量的吡啶N及FeN_x相关. 该工作加深了作者对形貌相关的ORR及CO₂RR过程的认识和理解.