Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

A Novel Fission Process in Mini-emulsion RAFT Polymerization: Shell Crosslinked Nanoparticles as a Model

Shell crosslinked nanoparticles, prepared from copolymerization of styrene and disulfide crosslinker, using poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as stabilizer and macroinitiator, exhibited a special fission behavior during the mini-emulsion RAFT polymerization process.     

Synthesis of Novel Semiconducting Aromatic Polyesteramids Containing Pyridine: Characterization of Nanometer-Sized Rod-Like Analogues and their Copper (II) Complexes

In this paper, new thermally stable isomeric unsubstituted polyesteramides have been successfully prepared by condensation of aromatic acids chlorides namely; isophthaloyl, pyridine-3,5-dicarbonyl and pyridine-2,6-pyridine-dicarbonyl dichlorides with the aminophenol isomers in NMP. Conducting the reaction in NMP/H₂O (90/10 v/v) followed by centrifugal separation furnished the desired polymers as rod-like nanoparticles. The morphology of obtained nanoparticles were studied by SEM. Mixing NMP with H₂O was essential for controlling the particles morphology and as a reaction accelerator.

Pyridine-containing polymers exhibit semi-conducting nature as their conductivities increase with increasing temperature, while no variation of the conductivity with the temperature was observed for their corresponding phenylene analogues. Introduction of the nitro group into the polymer backbone led to a red shift in the absorption and the obtained polymers have a bright yellow color, which is unusual with this polymer group. Copper (II) ions were complexed the polyesteramides-containing nitro group in a (1:1) ratio. Complexes of pyridine-containing polymers exhibit semiconducting nature changed to metallic characters on heating and their conductivities increased tens of magnitudes than their corresponding ligands. These new types of polymeric materials and their nano-sized rods may have numerous applications in nanotechnology and their properties can be tuned for specific applications such as conducting adhesives and coating materials.     

Sodium Alginate and Poly(ethylene glycol) Blends: Thermal and Morphological Behaviors

Sodium alginate (SA) was blended with varying amounts of poly(ethylene glycol) (PEG) viz., 10, 20, 30, 40 and 50 wt % by using water as a solvent. The obtained SA/PEG blends have been characterized for thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) and surface morphology by scanning electron microscopic (SEM) methods. DSC analysis indicates the increase in glass transition temperature (T_g) of the blends with an increase in PEG content in the blend, which is due to chain entanglement. TGA results reveal the enhancement of thermal stability of SA/PEG blends in terms of the onset of degradation and percentage of weight loss. SEM photomicrographs shows the two phase morphology. This result indicates the immiscible nature of the SA/PEG blends.     

Preparation and Characterization of Cyclohexyl Moiety Toughened POSS-Reinforced Epoxy Nanocomposites

Polyhedral oligomeric silsesquioxane (POSS)-reinforced epoxy nanocomposites were prepared by reacting commercially available diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino diphenyl methane (TGDDM) epoxy resins with 1,1-bis(3-methyl-4-glycidyloxyphenyl)cyclohexane (Cy-Ep) separately and reinforced with POSS nanocluster. POSS (OAPS)-reinforced hybrid Cy-Ep-epoxy resin castings were characterized for their mechanical and morphological properties. The data obtained from mechanical studies indicated that the incorporation of nano OAPS into Cy-Ep modified hybrid systems results in improved stability. Among the epoxy systems studied, the TGDDM-based hybrid epoxy system exhibited higher values of tensile and flexural properties than that of the DGEBA hybrid epoxy system, whereas the impact strength of the DGEBA system was higher than that of the TGDDM system. The dispersion of POSS was confirmed by scanning electron microscopy and visual observation studies.     

Microstructural evolution during oxidative ablation in air for polyacrylonitrile based carbon fibers with different graphite degrees

Polyacrylonitrile‐based carbon fibers with different graphite degrees were oxidative ablated at 500 and 600 °C in air. By Thermal gravimetric (TG), Raman spectroscopy, X‐ray diffraction, and SEM, the mass loss, microstructure, and surface morphology of carbon fibers were investigated. The mass loss of carbon fiber increases linearly with increasing oxidative ablated time under 500 and 600 °C. The carbon fiber with higher graphite degree shows higher oxidative resistance, and the surface roughness increases gradually because of chemical ablation during the whole oxidation. A gloss morphology appears on the surface primarily because of physical denudation for carbon fibers with lower graphite degree and then burn off according to carbon and oxygen reaction. The crystallite size (La) decreases significantly, while interlayer spacing(d₀₀₂) remains nearly unchanged. SEM observation suggests the two kinds of ablation mechanisms for carbon fibers with different graphite degrees indicating that CC band in sp³ hybridization prefers to be attacked by oxygen molecule more than that in sp² hybridization during oxidation ablation in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Physicochemical Studies on an All-Purpose Pesticide Spray Adjuvant-(APSA-80)

APSA-80, an useful pesticide spray adjuvant is a mixture of 2-[2-(4-nonylphenoxy) ethoxy] ethanol, 1-butanol and tall oil fatty acids. It is strongly surface active and can decrease the surface tension of water to ～20 mNm^?1 at its critical micelle concentration (CMC) of 0.006 g%. APSA-80 itself and its binary mixtures, (APSA-80 + water) and (APSA-80 + isopropylmyristate [IPM]) and ternary mixtures (APSA-80 + water +IPM) can undergo a number of physical changes with rise in temperature; the main changes are in color, turbidity and phases. The ternary mixtures of APSA-80/water/IPM with changing compositions can form mono-, bi-, and triphasic solutions as well as gels and viscous solutions. The gel and viscous phases show characteristic rheological properties of both shear thinning and thickening types. They also show permeation of hydrophilic and oleophilic dyes through them. SEM and optical microscopic measurements have shown interesting surface morphologies of the gels and their vertical projections in three-dimensional pictorial mode. Salts like LiCl, NaCl, KCl, CsCl, MgSO₄, and Al₂(SO₄)₃ can have both minor and major effects on the gel consistencies. The alkanols like ethanol, propanol, and isopropanol are also mild to fairly large gel influencing co solvents. The antibacterial properties of APSA-80 have been studied with two Gram positive bacteria and a yeast; the activities found were moderate.     

Janus Emulsion Drops: Equilibrium Calculations

Experimental results indicated the contact angles in the drops of Janus emulsions formed in a one-step mixing process to be invariant within a significant range the oil volume ratios, similar to the results from microfluidics emulsification. Since this result points to a connection between the kinetically formed emulsions and the local equilibrium topology of emulsion drops, the effect of interfacial tensions on the morphology of Janus emulsions was estimated from the equilibrium interfacial tensions at the line of contact. Realistic values of the tensions revealed the limited range of these to obtain Janus drops and also offered correlation between the equilibrium entities and the curvature of the interface between the two oils.     

Morphology and Size Distribution Characterization of Precipitated Asphaltene from Live Oil During Pressure Depletion

The size and morphology of asphaltene aggregates, precipitated from live oil by pressure depletion at the reservoir temperature was studied using scanning electron microscopy and atomic force microscopy. The experimental studies showed that the mean size of aggregates increased when pressure decreased. The results indicate that the morphology of aggregates was changed from amorphous spherical and elliptical shapes to irregular. A bimodal distribution function was able to describe the size distribution in pressure range of 500 to 3500 psi. At higher pressure, the unimodel was able to represent the size distribution. The results showed reduction in live oil stability and asphaltene aggregation with pressure drop.