γ-AlOOH纳米棒的水热合成与形貌调控

γ-AlOOH作为液相法合成γ-Al₂O₃的前驱体,其形貌与最终产物的性能密切相关。 本文采用水热法合成γ-AlOOH纳米棒,通过改变Al³⁺浓度和沉淀剂的种类调控γ-AlOOH纳米棒的长径比,利用X射线衍射仪(XRD)和透射电子显微镜(TEM)表征产物的晶体结构和形貌。 结果表明,随Al³⁺浓度增大可得到长径比在5.9~8.0的γ-AlOOH纳米棒,而改变沉淀剂的种类可进一步将长径比增大到8.0~10.0。 通过对产物结晶过程的分析,发现增大Al³⁺浓度和增强沉淀剂碱性均可以促进铝离子与羟基的配合。 提高反应体系中Al(OH)₃浓度,有利于γ-AlOOH晶粒的成核,促进了晶核之间的定向接触,从而提高了纳米棒的长径比。 长径比为10.0的γ-AlOOH纳米棒烧结所得纳米γ-Al₂O₃改性变压器油(体积分数为0.1%)的正冲击击穿强度较纯油提高9.9%.     

Ag掺杂对n-ZnO纳米棒/p-GaN异质结结构和发光性能的影响

利用简单的水热合成法在p-GaN薄膜上制备了Ag掺杂的一维ZnO纳米棒（ZnO NRs）,并且研究了Ag掺杂对于ZnO NRs结构和形貌以及n-ZnO NRs/p-GaN异质结发光特性的影响。结果表明,不同Ag掺杂浓度的ZnO纳米棒截面均呈六边形的棒状结构,且纳米棒的取向垂直于衬底;XRD分析结果表明,随着Ag掺杂浓度的增加,ZnO纳米棒（0002）晶面的峰位向衍射角减小的方向移动,表明Ag⁺置换了ZnO晶格中的部分Zn²⁺后使其晶格常数略增加;随着Ag掺杂浓度的增加,ZnO纳米棒近带边发光峰发生一定的红移并且强度逐渐减弱,黄带发光峰逐渐增强,n-ZnO NRs/p-GaN异质结具有更好的传输效率。     

Functionalized polypyrrole nanotube arrays as electrochemical biosensor for the determination of copper ions

A novel electrochemical biosensor based on functionalized polypyrrole (PPy) nanotube arrays modified with a tripeptide (Gly-Gly-His) proved to be highly effective for electrochemical analysis of copper ions (Cu²⁺). The vertically oriented PPy nanotube arrays were electropolymerized by using modified zinc oxide (ZnO) nanowire arrays as templates which were electrodeposited on indium–tin oxide (ITO) coated glass substrates. The electrodes were functionalized by appending pyrrole-α-carboxylic acid onto the surface of polypyrrole nanotube arrays by electrochemical polymerization. The carboxylic groups of the polymer were covalently coupled with the amine groups of the tripeptide, and its structural features were confirmed by attenuated total reflection infrared (ATR-IR) spectroscopy. The tripeptide modified PPy nanotube arrays electrode was used for the electrochemical analysis of various trace copper ions by square wave voltammetry. The electrode was found to be highly sensitive and selective to Cu²⁺ in the range of 0.1–30 μM. Furthermore, the developed biosensor exhibited a high stability and reproducibility, despite the repeated use of the biosensor electrode.     

一种在固体基底上制备高度取向氧化锌纳米棒的新方法

采用廉价、低温的方法，在修饰过ZnO纳米粒子膜的ITO基底上成功制备出具有 高长径比、高度取向的ZnO纳米棒阵列，用扫描电子显微镜(SEM)，X射线衍射(XRD) ，高分辨透射电子显微镜(HRTEM)以及拉曼光谱对制备出的ZnO纳米棒的结构和形貌 进行了表征，测试结果表明，ZnO纳米棒是单晶，属于六方晶系，与基底直，上仍 沿(001)晶面择优生长的特征，并且ZnO纳米棒基本上无氧空位的存在，统计结果显 示，水热反应2h后90%以上的ZnO纳米棒直径为120～190nm，长度为4μm     

离子液体中ZnO纳米棒的制备与表征

离子液体中ZnO纳米棒的制备与表征;离子液体;ZnO纳米棒;热分解     

阳极氧化法制备TiO2多孔薄膜

本文综述了制备TiO₂薄膜的各种方法,详细介绍了阳极氧化法制备TiO₂多孔膜的进展,在非含氟电解液体系中,对纯钛进行阳极氧化处理可制得表面呈无规则生长的多孔膜结构;在含氟电解液体系中,则可自组织形成高度有序的TiO₂纳米管阵列,并指出阳极氧化法是可在常温低压下进行、操作工艺简单、薄膜性能稳定、再现性好的一种最具工业化应用潜力的制备方法。     

基于生物素-亲和素相互作用的胶体晶体阵列的构筑与特性

将胶体晶体阵列(crystalline colloidal arrays,CCA)的Bragg衍射特性与水凝胶的刺激响应性功能结合起来,可制成一种有效的对特定分子具有识别和响应能力的传感材料.采用无皂乳液聚合制备的单分散聚(苯乙烯-4-苯乙烯磺酸钠)纳米颗粒,通过表面电荷的静电斥力可自组装形成CCA,经光聚合固定在水凝胶网络内形成聚合胶体晶阵(polymerized CCA).在水凝胶网络中用共价结合引入生物素分子,通过强的亲和相互作用可与蛋白质亲和素生成生物素-亲和素复合物,在水凝胶网络中形成交联点,引起水凝胶体积相变,进而导致CCA晶面间距发生改变,从而引发Bragg衍射波长发生相应的移动.     

铜掺杂类金刚石纳米点阵列的制备及场发射性能研究

利用磁过滤等离子体结合氧化铝模板(AA0)技术在室温下制备了具有优异场发射性能的铜掺杂类金刚石(DLC)纳米点阵列.微观分析表明,铜掺杂类金刚石纳米点阵列分布均匀,密度高达109cm-2;利用X射线光电子能谱对制备的铜掺杂类金刚石纳米点阵列进行结构分析,测得铜的掺杂量为3.6;且sp3键含量高达60;;通过对铜掺杂类金刚石纳米点阵列的场发射性能测试,试验结果表明,铜掺杂类金刚石纳米点阵列开启电场和阈值电场分别为0.08V/μm,0.42V/μm,并且在电场值为0.67V/μm时,发射电流密度高达95mA/cm2,场发射性能明显优于无掺杂类金刚石纳米点阵列.     

基于坐标映射的类周期电磁金属阵列布局设计的灵敏度分析方法

特定性能的类周期电磁金属阵列已成功应用于多种类型的电磁器件中,以实现其电磁辐射或散射性能的提升设计.类周期电磁金属阵列可描述为由多个相似形状的电磁金属单元按照特定的布局形式组合形成.布局形式由阵列的布局参数确定,通常包括每个单元的尺寸、转角以及位置参数.布局参数往往规模较大且相互独立,需要经过设计优化以满足阵列的性能要...     

Breath Figure Arrays: Unconventional Fabrications,Functionalizations, and Applications

A breath figure (BF) is the water droplet array that forms when moisture comes in contact with a cold substrate. This water droplet array has been widely utilized in the past two decades as a versatile soft template for the fabrication of polymeric porous films. Accordingly, the ordered pores on the polymer films formed with such a method are named a breath figure array (BFA).The BF templating technique is undergoing rapid development. Several unconventional BF processes have been established to prepare porous films with unique morphologies or primary materials, and various newly developed functionalization techniques have significantly improved the performance of polymeric films with BFA, leading to novel applications, including templates, biosensors, and separation membranes. These recent achievements will be described in this Minireview.