Fe3O4@C Nanotubes Grown on Carbon Fabric as a Free-Standing Anode for High-Performance Li-Ion Batteries

Recently, Li-ion batteries (LIBs) have attracted extensive attention owing to their wide applications in portable and flexible electronic devices. Such a huge market for LIBs has caused an ever-increasing demand for excellent mechanical flexibility, outstanding cycling life, and electrodes with superior rate capability. Herein, an anode of self-supported Fe₃O₄@C nanotubes grown on carbon fabric cloth (CFC) is designed rationally and fabricated through an in situ etching and deposition route combined with an annealing process. These carbon-coated nanotube structured Fe₃O₄ arrays with large surface area and enough void space can not only moderate the volume variation during repeated Li⁺ insertion/extraction, but also facilitate Li⁺/electrons transportation and electrolyte penetration. This novel structure endows the Fe₃O₄@C nanotube arrays stable cycle performance (a large reversible capacity of 900 mA h g⁻¹ up to 100 cycles at 0.5 A g⁻¹) and outstanding rate capability (reversible capacities of 1030, 985, 908, and 755 mA h g⁻¹ at 0.15, 0.3, 0.75, and 1.5 A g⁻¹, respectively). Fe₃O₄@C nanotube arrays still achieve a capacity of 665 mA h g⁻¹ after 50 cycles at 0.1 A g⁻¹ in Fe₃O₄@C//LiCoO₂ full cells.     

Plasma generation in silicon-based inductive grid arrays

Selective illumination of a silicon wafer can be used for the construction of non-permanent inductive grids. A numerical model is used for the calculation of plasma density distribution in silicon as a function of time. Some indicative results on the microwave properties of the device are presented.     

Chemisorption assembly of Au nanorods on mercaptosilanized glass substrate for label-free nanoplasmon biochip

The fabrication of a localized surface plasmon resonance nanosensor in a chip based format that utilizes Au nanorods (GNRs) as the optical transducer were systematically studied. (3-mercaptopropyl)trimethoxysilane (MPTMS) modified glass substrate offers GNR deposition with maximal sensitivity to local refractive index changes, which subsequently results in better optical recognition of receptor–analyte binding. Kinetics governing the mass transport and chemisorption of nanorods from bulk to solid surface can be dynamically controlled in a predictable fashion. We demonstrate that slight aggregation induced by a low ionic strength (5 mM NaCl) can facilitate the nanorod assembly to result in a dense, well-distributed surface monolayer. In high ionic media (e.g. 40–80 mM), anions present electrostatically bind with the positively charged cetyltrimethylammonium bromide (CTAB) surrounding nanorod surfaces, thereby leading to instability with heavy aggregation in solution. However, once chemically bound on silanized substrates, the nanorods exhibit excellent stability in physiological buffer where high amount of ionic species are present. The fundamental study is followed by demonstration of a practical application of the fabricated biochip in label-free detection based on GNR wavelength shift of the longitudinal palsmon maxima as the optical signature of human IgG model detection.     

Single molecule study of DNA collision with elliptical nanoposts conveyed by hydrodynamics

Periodic arrays of micro‐ or nanopillars constitute solid‐state matrices with excellent properties for DNA size separation. Nanofabrication technologies offer many solutions to tailor the geometry of obstacle arrays, yet most studies have been conducted with cylinders arranged in hexagonal lattices. In this report, we investigate the dynamics of single DNA collision with elliptical nanoposts using hydrodynamic actuation. Our data show that the asymmetry of the obstacles has minor effect on unhooking dynamics, and thus confirm recent predictions obtained by Brownian dynamics simulations. In addition, we show that the disengagement dynamics are correctly predicted by models of electrophoresis, and propose that this consistency is associated to the confinement in slit‐like channels. We finally conclude that elliptical posts are expected to marginally improve the performances of separation devices.     

基于金纳米棒刻蚀比色法检测铁、铜离子

采用种子生长法制备金纳米棒(AuNRs)以构建光学传感器,用于 Fe³⁺和 Cu²⁺的高选择性快速可视化检测。在酸性环境中,Fe³⁺和 Cu²⁺通过与 KI溶液反应,将 I^-氧化成 I₂。I₂刻蚀 AuNRs,导致其纵向表面等离子体共振(LSPR)吸收峰蓝移,从而实现对Fe³⁺和Cu²⁺的检测。结果表明,反应温度为50℃时,添加0.8 mL 0.1 mol·L^-1 HCl、2 mL AuNRs生长液和20 mmol·L^-1 KI溶液,与 2 mL 500 μmol·L^-1 Fe³⁺或 30 μmol·L^-1 Cu²⁺反应 25或 90 min,可将 AuNRs刻蚀至 LSPR 吸收峰消失。该方法对 Fe³⁺和 Cu²⁺检测具有高选择性和准确性,对于 Fe³⁺、Cu²⁺共存体系的检测,可通过加入适量 F-与 Fe³⁺生成配合物[FeF₆]3^-完成对 Fe³⁺的化学掩蔽,消除Fe³⁺的干扰,实现共存体系中Cu²⁺的准确检测。     

离子液体辅助水热法合成六方WO3纳米棒束

提出了利用简单的离子液体1-甲基-3-乙基-咪唑溴辅助水热法合成六方WO₃纳米棒束的方法,对其结构进行了表征,并讨论其形成机理。TEM照片表明：WO₃纳米棒束由长200~300 nm、直径25~30 nm的纳米棒组装而成。离子液体1-甲基-3-乙基-咪唑溴在纳米棒的形成过程中起到了结构导向剂的作用。     

Design rule of indium bump in infrared focal plane array for longer cycling life

In light of the proposed equivalent method, a three-dimensional structural modeling of InSb infrared focal plane arrays (IRFPAs) is created, and the simulated strain distribution is identical to the deformation distribution on the top surface of InSb IRFPAs. After comparing the deformation features at different regions with the structural characteristics of IRFPAs, we infer that the flatness of InSb IRFPAs will be improved with a thinner indium bump array, and this inference is verified by subsequent simulation results. That is, when the diameter of indium bump is smaller than 20 μm, the simulated Z-components of strain on the whole top surface of InSb IRFPAs is uniform, and the deformation amplitude is small. When the diameter of indium bump is larger than 28 μm, the simulated Z-components of strain increases rapidly with the thicker indium bump, and the flatness of InSb IRFPAs is worsened rapidly. According to the changing trend of deformation amplitude with diameters of indium bump, and employing element pitches normalization method, a design rule of indium bump is proposed. That is, when the diameter of indium bump is shorter than 0.4 times the element pitch, the flatness of InSb IRFPAs is in an acceptable range. This design rule was supported by different IRFPAs with different formats delivered by several main research groups for achieving a longer cycling life.     

Self‐Assembled Binary Mixtures of Partially Etched Nanowires

Arrays of anisotropic particles are sought after for applications in optics, electronics, and energy. Structures assembled from multiple micro‐ or nanoparticles could incorporate the distinct properties of each component to achieve functions not possible from single‐population assemblies. In mixed‐particle populations, the assembly forces may differ between the particle types, which will in turn influence the final assembled structures. Here, binary particle mixtures are studied and compared to assemblies formed from each of the component particles alone. The particles are partially etched nanowires (PENs, ≈300 nm diameter, and 3–8 μm overall length), which are formed by the silica coating and subsequent etching of striped metal nanowires, such that what remains are silica nanotubes containing segments of metal core (Au, Pt, Rh, or Pt/Au) with controllable location and number, spaced by “empty” regions that fill with water. Binary mixtures of PENs with different core metals and segment patterns are examined here to explore how the different core segment material, length, position, and number affects overall self‐assembly behavior.     

Observation of room temperature negative differential resistance in solution synthesized ZnO nanorod

We report the observation of negative differential resistance (NDR) in solution synthesized ZnO nanorod. The ZnO nanorod was fabricated as a two terminal planar device using lithographically patterned Au electrodes. The measured current–voltage response of the device has shown a negative differential resistance behavior. The peak-to-valley current ratio of the NDR is found to be greater than 4. The mechanism of this observed NDR effect has been explained based on charge trapping and de-trapping at the nanoscale contacts. It is the first observation of negative differential resistance effect in solution synthesized ZnO nanorod.     

Solvothermal Transformation of a Calcium Oleate Precursor into Large‐Sized Highly Ordered Arrays of Ultralong Hydroxyapatite Microtubes

Hydroxyapatite (HAP), a well‐known member of the calcium phosphate family, is the major inorganic component of bones and teeth in vertebrates. The highly ordered arrays of HAP structures are of great significance for hard tissue repair and for understanding the formation mechanisms of bones and teeth. However, the synthesis of highly ordered HAP structure arrays remains a great challenge. In this work, inspired by the ordered structure of tooth enamel, we have successfully synthesized three‐dimensional bulk materials with large sizes (millimeter scale) that are made of highly ordered arrays of ultralong HAP microtubes (HOAUHMs) by solvothermal transformation of calcium oleate precursor. The core–shell‐structured oblate sphere consists of a core that is composed of HAP nanorods and a shell that consists of highly ordered HAP microtube arrays. The prepared HOAUHMs are large: 6.0 mm in diameter and up to 1.4 mm in thickness. With increasing solvothermal reaction time, the HOAUHMs grow larger; the microtubes become more uniform and more ordered. This work provides a new synthetic method for synthesizing highly ordered arrays of uniform HAP ultralong microtubes that are promising for biomedical applications.