Supramolecular Hybrids from Cyanometallate Complexes and Diblock Copolypeptide Amphiphiles in Water

The self-assembly of discrete cyanometallates has attracted significant interest due to the potential of these materials to undergo soft metallophilic interactions as well as their optical properties. Diblock copolypeptide amphiphiles have also been investigated concerning their capacity for self-assembly into morphologies such as nanostructures. The present work combined these two concepts by examining supramolecular hybrids comprising cyanometallates with diblock copolypeptide amphiphiles in aqueous solutions. Discrete cyanometallates such as [Au(CN)₂]⁻, [Ag(CN)₂]⁻, and [Pt(CN)₄]²⁻ dispersed at the molecular level in water cannot interact with each other at low concentrations. However, the results of this work demonstrate that the addition of diblock copolypeptide amphiphiles such as poly-(L-lysine)-block-(L-cysteine) (Lys_m-b-Cys_n) to solutions of these complexes induces the supramolecular assembly of the discrete cyanometallates, resulting in photoluminescence originating from multinuclear complexes with metal-metal interactions. Electron microscopy images confirmed the formation of nanostructures of several hundred nanometers in size that grew to form advanced nanoarchitectures, including those resembling the original nanostructures. This concept of combining diblock copolypeptide amphiphiles with discrete cyanometallates allows the design of flexible and functional supramolecular hybrid systems in water.     

导电聚苯胺线膜修饰ZnO纳米棒阵列的可控制备及其紫外探测性能

基于p-n结的光生伏特效应可构筑性能优异的UV探测器,本文采用水热法可控制备竖直排列的氧化锌纳米棒阵列(n型ZnO-NRs),利用原位聚合法在ZnO-NRs表面上修饰p型聚苯胺线膜(PANI-NWs),再组装成ZnO-NRs与ZnO-NRs/PANI-NWs紫外探测器.通过扫描电镜(SEM)、X射线衍射仪(XRD)、紫...     

Polymer-assisted complexing controlled orientation growth of ZnO nanorods

The growth of the oriented zinc oxide (ZnO) nanorods on silicon substrates based on a simple novel chemical transformation and thermal hydrolysis by using polyvinyl alcohol (PVA) as self-assembling complex polymer was introduced in this paper. All the polymers were removed after chemical oxidation and only the carbonized grid backbones remained that confines the ZnO nanorod’s diameter and enhance the absorption and diffusion of ZnO at the tips of the nanorods during growth. The ZnO nanorods are investigated by FTIR, XRD and FE-SEM. The results indicated that these nanorods have fine hexagonal wurtzite crystal structure and their diameter varies from 20 to 90 nm and the length up to about 1 μm. A polymer-localized ZnO growth model is proposed, which well explains the growth behavior of ZnO nanorods.This revised version was published online in August 2005 with a corrected issue number.     

Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

Preparation and Mechanical and Tribological Properties of High-Density Polyethylene/Hydroxyapatite Nanocomposites

High-density polyethylene (HDPE) nanocomposites reinforced with hydroxyapatite nanorods (nHA) were fabricated by means of extrusion and injection molding. The thermal, mechanical, and dry sliding wear properties of HDPE-based nanocomposites filled with nHA loadings up to 20 wt% were investigated. The results of mechanical property characterization showed that nHA additions improved the hardness, elastic modulus, and yield strength of HDPE at the expense of its tensile ductility and impact strength. Thermogravimetric analysis and heat deflection temperature measurements revealed that nHA fillers are very effective to enhance the thermal stability of HDPE. The wear behavior of HDPE/nHA nanocomposites was studied using a pin-on-disk tribometer. nHA fillers of a large aspect ratio improved the wear resistance of HDPE substantially because of their load-bearing effect and the formation of a continuous transfer film on the steel counterface.     

行NA随机变量三角阵列的完全收敛性

令{Xm;1≤i≤n,n≥1}是行NA的随机变量三角阵列．利用NA随机变量序列的一个矩不等式,讨论了行NA的随机变量三角阵列在被随机变量X弱平均控制的条件下的完全收敛性．所得到的结果推广了行独立的随机变量三角阵列相应的结果．     

曲率对有限曲面狭缝阵列传输特性的影响

扩展互导纳法用于研究有限曲面狭缝阵列的传输特性,分析了一维弯曲效应以及单元列数、曲率等因素对磁流分布、散射方向图及频率响应曲线的影响.结果表明,曲面张角是衡量弯曲效应的主要参数. 当曲面张角较大时(120°以上),弯曲效应显著,单元磁流分布剧烈起伏,散射方向图波束展宽且副瓣电平升高,谐振频率、传输带宽及功率透射系数等频率响应特性均发生较大变化.当曲面张角较小时(60°以下),仅边缘附近的单元磁流分布受到曲率影响,散射方向图与传输特性均接近于有限平面阵列,表明此时可近似忽略弯曲效应. 关键词： 频率选择表面 狭缝阵列 传输特性 曲率     

自控液晶光阀组式光刻快门研究

通过理论推导,构建了抗蚀剂的感光特性、光源的光效与曝光量之间的数学模型,为液晶光阀代替穿孔带提供了理论依据.结合液晶光阀的工作原理和光刻快门的控制原理,对液晶光阀组的控制进行了研究并给出了其控制电路图.通过实际光刻试验,自控液晶光阀组光刻快门机构可以完成编码图案的控制,通光控制达到了预计要求,刻出的图案清晰,线条陡直.证明液晶光阀组替代穿孔带用作光刻快门是完全可行的.     

含纳米棒银溶胶的制备及其光谱性质研究

以CTAB表面活性剂胶束为模板用化学还原法制备出含有银纳米棒的银胶体,用透射电镜(TEM)对颗 粒形貌进行了表征.UV Vis吸收谱显示,含银纳米棒溶胶有两个吸收蜂,其中长波长吸收峰位置随胶粒长径比增 加迅速红移和宽化.用多尺寸统计平均的Mie散射模型计算了纳米棒银胶体的吸收谱,较好地解释了长波长吸收 峰的宽化.以此胶体为衬底材料,测量了染料分子的表面增强拉曼散射(SERS),结果显示,SERS强度随胶体中 所含纳米棒长径比的增加呈现先显著增强后缓慢减弱的变化规律,用电磁增强理论对有关现象进行了分析.     

金纳米棒核／二氧化硅壳纳米复合结构的可控制备及细胞成像

采用模板合成以及溶胶凝胶方法制备了金纳米棒核／二氧化硅壳（GNR@SiO2）纳米复合粒子,探讨了这种新型纳米复合结构的可控制备、光谱性质、细胞毒性和细胞成像。通过紫外可见分光光度计、透射电镜、共聚焦显微镜对样品进行表征,结果表明：通过对反应时间的调控,获得的纳米复合粒子的二氧化硅壳层厚度可以控制在20～30nm。由于二氧化硅壳层的存在,大大提高了金纳米棒的稳定性,同时降低了金纳米棒的细胞毒性;此外,由于二氧化硅壳层具有良好的化学修饰作用,因此可以将荧光探针分子标记在二氧化硅壳层表面,修饰后的纳米复合粒子可以通过细胞内吞作用进入细胞,从而实现细胞内的光学成像。因此,该纳米粒子复合材料在生物传感、细胞成像以及光热治疗等方面有着良好的应用前景。