纳米结构ZnO在TiO_2薄膜上的电化学沉积及其表征

在三电极体系中,以硝酸锌水溶液作为电解液,采用阴极还原电沉积法成功实现了一维纳米结构ZnO阵列在TiO2纳米粒子/ITO导电玻璃薄膜基底上的沉积,并通过XRD、SEM、EDS和PL光谱等方法对样品进行了表征.重点研究了薄膜基底、电解液浓度、沉积时间、六次亚甲基四胺(HMT)的引入对ZnO沉积及其发光性质的影响.结果显示:与ITO玻璃基底相比,ZnO更易于在TiO2纳米粒子薄膜上实现电化学沉积.ZnO属于六方晶系的铅锌矿结构,并且沿着c-轴方向表现出明显的择优化生长,以形成垂直于基底的ZnO纳米棒阵列.延长沉积时间、增加电解液浓度和引入一定量的HMT等均对ZnO的生长有促进作用,进而使其纳米棒的结晶度和取向程度提高,进而解释了所得的薄膜分别约在375和520nm处表现出ZnO的强而窄的带边紫外光发射峰和弱而宽的表面态绿光发射带.     

PEG辅助氧化锌纳米棒的水热法制备

采用PEG辅助水热法合成了ZnO纳米棒,XRD显示产物为结晶良好的六角结构晶体ZnO,PL谱表明适当退火处理后产物有较好的光致发光性能.利用TEM和SAED研究了纳米棒的形貌和生长机制,并研究了氢氧化钠浓度和反应时间对产物形态和尺寸的影响.     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

基于金纳米棒刻蚀比色法检测铁、铜离子

采用种子生长法制备金纳米棒(AuNRs)以构建光学传感器,用于 Fe³⁺和 Cu²⁺的高选择性快速可视化检测。在酸性环境中,Fe³⁺和 Cu²⁺通过与 KI溶液反应,将 I^-氧化成 I₂。I₂刻蚀 AuNRs,导致其纵向表面等离子体共振(LSPR)吸收峰蓝移,从而实现对Fe³⁺和Cu²⁺的检测。结果表明,反应温度为50℃时,添加0.8 mL 0.1 mol·L^-1 HCl、2 mL AuNRs生长液和20 mmol·L^-1 KI溶液,与 2 mL 500 μmol·L^-1 Fe³⁺或 30 μmol·L^-1 Cu²⁺反应 25或 90 min,可将 AuNRs刻蚀至 LSPR 吸收峰消失。该方法对 Fe³⁺和 Cu²⁺检测具有高选择性和准确性,对于 Fe³⁺、Cu²⁺共存体系的检测,可通过加入适量 F-与 Fe³⁺生成配合物[FeF₆]3^-完成对 Fe³⁺的化学掩蔽,消除Fe³⁺的干扰,实现共存体系中Cu²⁺的准确检测。     

Rapid Synthesis of Lead Oxide Nanorods by One-step Solid-state Chemical Reaction at Room Temperature

A simple and facile method was reported to synthesize lead oxide nanorods. Nanorods of lead oxide were obtained directly from grinding solid metal salt and sodium hydroxide in agate mortar with the assistance of a suitable nonionic surfactant in only one step, which is different from the result of hydroxide in solution. The product has been characterized by XRD, TEM and SEM. The formation mechanism of rod-like morphology is discussed and the surfactant plays an important soft-template role in modifying the interface of solid-state reaction and according process of rod-formation.     

A Nonenzymatic Glucose Sensor Based on a Copper Nanoparticle–Zinc Oxide Nanorod Array

A non-enzymatic sensor for glucose based on copper nanoparticles and zinc oxide nanorod array modified fluorine-doped tin oxide conductive glass electrode was constructed by two-step electrodeposition. The electrode was characterized by scanning electron microscopy and X-ray diffraction. The electrochemical behavior of the modified electrodes was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Under the optimal conditions, the modified electrode offered a rapid response to glucose in the range from 5 × 10^?6 M to 1.1 × 10^?3 M (R = 0.9975) with a detection limit of 3 × 10^?7 M (S/N = 3) and a sensitivity of 609.8 µA · mM^?1. The preparation and operation of the biosensor was simple, had lower cost, and offered excellent performance due to its high sensitivity, good stability, reproducibility, and selectivity against other substances. The satisfactory results illustrated that it was promising for the determination of glucose in alkaline solutions.     

Ag掺杂对n-ZnO纳米棒/p-GaN异质结结构和发光性能的影响

利用简单的水热合成法在p-GaN薄膜上制备了Ag掺杂的一维ZnO纳米棒（ZnO NRs）,并且研究了Ag掺杂对于ZnO NRs结构和形貌以及n-ZnO NRs/p-GaN异质结发光特性的影响。结果表明,不同Ag掺杂浓度的ZnO纳米棒截面均呈六边形的棒状结构,且纳米棒的取向垂直于衬底;XRD分析结果表明,随着Ag掺杂浓度的增加,ZnO纳米棒（0002）晶面的峰位向衍射角减小的方向移动,表明Ag⁺置换了ZnO晶格中的部分Zn²⁺后使其晶格常数略增加;随着Ag掺杂浓度的增加,ZnO纳米棒近带边发光峰发生一定的红移并且强度逐渐减弱,黄带发光峰逐渐增强,n-ZnO NRs/p-GaN异质结具有更好的传输效率。     

丙三醇辅助水热法合成纳米棒状LiFePO4

在丙三醇存在下,以FeSO4·7H2O,LiOH·H2O和H3 PO4为原料,采用水热法合成了橄榄石结构的纳米棒状LiFePO4.产物结构与形貌用X射线衍射、红外、扫描电子显微镜、能谱分析测试技术进行了表征.讨论了反应时间、温度、混合溶剂比例对产品形貌的影响.结果表明,当V(水)/以丙三醇)=2:1时,在180℃反应2...     

CdS量子点敏化ZnO纳米棒阵列电极的制备和光电化学性能

采用连续式离子层吸附与反应法制备了CdS量子点敏化的ZnO纳米棒电极.应用扫描电子显微镜(SEM)、X射线衍射(XRD)和透射电子显微镜(TEM)对CdS量子点/ZnO纳米棒电极的形貌、晶型和颗粒尺寸进行了分析和表征;采用光电流-电位曲线和光电流谱研究了不同CdS循环沉积次数及不同沉积浓度对复合电极的光电性能影响.结果表明,前驱体浓度都为0.1mol·L-1且沉积15次敏化后的ZnO纳米棒阵列电极光电性能最好.与单纯的ZnO纳米棒阵列电极和单纯的CdS量子点电极相比,其光电转换效率显著提高,单色光光子-电流转换效率(IPCE)在380nm处达到76%.这是因为CdS量子点可以拓宽光的吸收到可见光区,并且在所形成的界面上光生载流子更容易分离.荧光光谱实验进一步说明了光电增强的原因是,两者间形成的界面中表面态大大减少,有利于减少光生电子和空穴的复合.     

高度有序氧化钨纳米棒的制备和表征

采用直流磁控溅射法结合阳极氧化法在铝基纳米点阵上制备氧化钨(WO3)纳米棒. 运用原子力学显微镜(AFM), 电子扫描显微镜(SEM), X射线衍射仪(XRD), 电化学工作站(EW)和紫外-可见分光光度计(UV)观察表征了WO3纳米棒的表面形貌、结构、光学性能和电致变色性能. 结果表明: 在溅射过程中, 溅射粒子优先沉积于铝基纳米点阵的凸点上, 然后成核并形成棒状; WO3纳米棒的直径约为200 nm, 与铝基纳米点阵的直径一致, 拥有一定的电致变色性能.