低介电常数介质薄膜的研究进展

用低介电常数介质薄膜作金属线间和层间介质可以降低超大规模集成电路(ULSI) 的互连延迟、串扰和能耗。从介质极化的原理出发,揭示了开发低介电常数介质薄膜的可能途径;综述了低介电常数介质薄膜的制备方法、结构与性能表征、工艺兼容性等领域的最新进展。     

聚3-甲基噻吩修饰硫化物量子点连接纳米结构TiO2膜的光电化学研究

采用原位化学法在纳米结构TiO₂膜上制备了量子点CdS, PbS (Q-CdS, Q-PbS), 并用电化学方法在TiO₂/Q-CdS, TiO₂/Q-PbS表面聚合3-甲基噻吩[poly(3-Methylthiophene, PMeT)]. 用光电化学方法研究了PMeT修饰Q-CdS, Q-PbS连接TiO₂纳米结构膜, 实验结果表明, PMeT和Q-CdS, Q-PbS单独修饰纳米结构TiO₂电极和PMeT修饰Q-CdS, Q-PbS连接纳米结构TiO₂电极的光电流产生的起始波长都向长波方向移动; 一定条件下在可见光区光电转换效率均较纳米结构TiO₂的光电转换效率有明显的提高; 聚3-甲基噻吩(PMeT)与Q-CdS, Q-PbS连接的纳米结构TiO₂之间存在p-n异质结. 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离, 在本文实验条件下PMeT修饰Q-CdS, Q-PbS连接纳米结构TiO₂电极最高的单色光的光电转换效率分别为11%和7%.     

脱合金制备纳米多孔双金属氧化物NiMoO_4及其电化学性能

采用快速凝固与脱合金相结合的方法制备纳米多孔Ni-Mo合金,然后退火获得三维双连续纳米多孔NiMoO_4,采用XRD、SEM、TEM对多孔NiMoO_4的成分、形貌和结构进行表征,并通过循环伏安、恒电流充放电等方法测试多孔NiMoO_4电极的电化学性能。结果表明,Ni_5Mo_5Al_(90)和Ni_(2.5)Mo_(2.5)Al_(95)经脱合金和退火均可获得纳米多孔NiMoO_4,Mo元素对脱合金具有钉扎作用,可减小多孔合金的骨架和孔隙尺寸,由Ni_5Mo_5Al_(90)合金获得纳米多孔NiMoO_4表现出更为优异的超电容性能,其在1 A·g~(-1)电流密度比容量达708 F·g~(-1),当电流密度增加20 A·g~(-1),其比容保持率达57.1%。在4 A·g~(-1)电流密度下循环充放电1 000次,其比容保持率达91.2%。     

Preparation of γ-Alumina Membranes From Sulphuric Electrolyte Anodic Alumina and Its Transition to α-Alumina

Gamma-alumina membrane was prepared from anodic (amorphous) alumina (AA) obtained in a sulphuric acid electrolyte. The transformation scheme, i.e., the crystallization to form metastable alumina polymorphs and the final transition to α-Al₂O₃ with heating was studied by TG-DTA and X-ray diffraction (XRD) using fixed time (FT) method. When heating at a constant rate, the crystallization occurred at 900°C or higher and the final formation of α-Al₂O₃ occurred at 1250°C or higher, which temperatures were higher than the case of using anodic (amorphous) alumina prepared from oxalic acid electrolyte. Relative content of S of the products was obtained by transmission electron microscope (TEM)-energy dispersive spectroscopy (EDS). The proposed thermal change of anodic alumina membrane prepared from sulphuric acid is as follows: 1. At temperatures lower than ca 910°C: Formation of a quasi-crystalline phase or a polycrystalline phase (γ-, δ- and θ-Al₂O₃); 2. 910–960°C: Progressive crystallization by the migration of S toward the surface within the amorphous or the quasi-crystalline phase, forming S-rich region near the surface; 3. 960°C: Change of membrane morphology and the quasi-crystalline phase due to the rapid discharge of gaseous SO₂; 4. 960–1240°C: Crystallization of γ-Al₂O₃ accompanying δ-Al₂O₃; and 5. 1240°C: Transition from γ-Al₂O₃ (+tr. δ-Al₂O₃) into the stable α-Al₂O₃. The amorphization which occurs by the exothermic and the subsequent endothermic reaction suggests the incorporation of SO₃ groups in the quasi-crystalline structure. This revised version was published online in July 2006 with corrections to the Cover Date.     

Assessing Surface Permeabilities from Transient Guest Profiles in Nanoporous Host Materials

Easy come, easy go? Transport resistances on particle surfaces are important for mass transfer in nanoporous materials and bulk diffusion in crystals. Interference microscopy and IR micro‐imaging are shown to be excellent tools for determining such transport resistances. By studying short‐chain‐length alkane guest molecules in crystals of the metal–organic framework compound Zn(tbip) a data collection of surface permeabilities is established.

     

Ensemble Measurement of Diffusion: Novel Beauty and Evidence

Recording the evolution of concentration profiles in nanoporous materials opens a new field of diffusion research with particle ensembles. The technique is based on the complementary application of interference microscopy and IR micro‐imaging. Combining the virtues of diffusion measurements with solids and fluids, it provides information of unprecedented wealth and visual power on transport phenomena in molecular ensembles. These phenomena include the diverging uptake and release patterns for concentration‐dependent diffusivities, the mechanisms of mass transfer at the fluid–solid interface and opposing tendencies in local and global concentration evolution.     

Self-Supported Nanoporous Au3Cu Electrode with Enriched Gold on Surface for Efficient Electrochemical Reduction of CO2

The key to the electrochemical conversion of CO₂ lies in the development of efficient electrocatalysts with ease of operation, good conductivity, and rich active sites that fulfil the desired reaction direction and selectivity. Herein, an oxidative etching of Au₂₀Cu₈₀ alloy is used for the synthesis of a nanoporous Au₃Cu alloy, representing a facile strategy for tuning the surface electronic properties and altering the adsorption behavior of the intermediates. HRTEM, XPS, and EXAFS results reveal that the curved surface of the synthesized nanoporous Au₃Cu is rich in gold with unsaturated coordination conditions. It can be used directly as a self-supported electrode for CO₂ reduction, and exhibits high Faradaic efficiency (FE) of 98.12 % toward CO at a potential of −0.7 V versus the reversible hydrogen electrode (RHE). The FE is 1.47 times that over the as-made single nanoporous Au. Density functional theory reveals that *CO has a relatively long distance on the surface of nanoporous Au₃Cu, making desorption of CO easier and avoiding CO poisoning. The Hirshfeld charge distribution shows that the Au atoms have a negative charge and the Cu atoms exhibit a positive charge, which separately bond to the C atom and O atom in the *COOH intermediate through a bidentate mode. This affords the lowest *COOH adsorption free energy and low desorption energy for CO molecules.