Polymerizable benzophenone derivatives for labeling vinyl acetate‐butylacrylate latex particles

We describe the synthesis and characterization of three new polymerizable benzophenone derivatives [2‐acryloxy‐5‐methyl benzophenone ( 8 ), 4′‐dimethylamino‐2‐acryloxy‐5‐methyl benzophenone ( 9 ), and 4′‐dimethylamino‐2‐(β‐acryloxyethyl)oxy‐5‐methyl benzophenone ( 10 )]. We show that these monomers can successfully be incorporated into vinyl acetate (VAc) copolymer latex particles. These particles were prepared by semicontinuous emulsion polymerization and mini‐emulsion polymerization of VAc with butylacrylate (BA) for VAc/BA = 4/1 by weight. The two monomers 9 and 10 bearing the 4′‐dimethylamino group satisfy the important spectroscopic criteria required of a dye to serve as an acceptor chromophore for nonradiative energy transfer from phenanthrene (Phe) as the donor. Their UV absorption spectra suggest significant overlap with the emission spectrum of Phe, which can be incorporated into P(VAc‐co‐BA) latex through copolymerization with 9‐acryloxymethyl Phe ( 2 ). In addition, these chromophores provide a window in their absorption spectra for excitation of the Phe chromophore at 300 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3001–3011, 2002     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

二(2,4,4-三甲基戊基)膦酸-上胺205-正庚烷乳状液膜分离钪(Ⅲ)、铁(Ⅲ)和镥(Ⅲ)

本文研究了二（2，4，4-三甲基戊基）膦酸（Cyanex272）-上胺205-正庚烷乳状液膜分离Sc（Ⅲ）、Fe（Ⅲ）和Lu（Ⅲ）。考察了外相酸度、表面活性剂浓度、流动载体浓度及内相盐酸浓度对Sc（Ⅲ）迁移的影响。并探讨了该液膜体系分离Sc（Ⅲ）、Fe（Ⅲ）和Lu（Ⅲ）的可能性，结果表明，该体系对于稀土矿中Sc（Ⅲ）的分离与分析有良好的应用前景。     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

硅氧烷乳液聚合过程中大颗粒形成机理研究：Ⅰ.阳离子型乳液的耐电解质…

探讨了二甲基聚硅氧烷阳离子型乳液耐电解质稳定性的影响因素。结果表明，加入少量的非离子型表面活性剂与阳离子型乳化剂并用进行乳液聚合，可以保护乳液粒子，防止由于电解质引的乳液粒子的相互凝聚而形成大颗粒。     

硅氧烷乳液聚合过程中大颗粒形成机理的研究：Ⅱ.聚硅氧烷乳液的耐酸碱…

研究了阴离子型与阳离子型聚硅氧烷乳液的耐酸碱稳定性，发现阴离子型乳液对酸碱都相当稳定，在乳液制备过程中，酸性催化剂不会引起乳液颗粒的凝聚；而阳离子型乳液的耐酸三稳定性性差，尤其是引起乳液颗粒慢速凝聚的碱浓度下限值很低，碱是制备阳离子型乳液的化剂，碱引起乳液颗粒的慢速凝聚是阳离子型乳液中大颗粒形成的主要原因，在乳液聚合过程中所发生的相当部分的乳化剂从水相向有机硅相的转移也是影响阳离子型乳液稳定性的一     

乙烯基硅烷-丙烯酸酯乳液共聚动力学研究

以乙烯基三乙氧基硅烷(VTES)、丙烯酸酯为单体,乙氧基醇磺基琥珀酸二钠(A—102)为乳化剂,合成了有机硅改性丙烯酸酯共聚乳液。研究了乳化剂、引发剂、VTES、反应温度以及功能性单体甲基丙烯酸羟乙酯(HEMA)对乳液共聚反应速率的影响。结果表明:聚合速率随乳化剂浓度、引发剂浓度、HEMA浓度的增大及反应温度的升高而增大,但随VTES浓度增大而逐渐减小。由实验得出恒速阶段聚合反应速率R_p与乳化剂浓度C_E、引发剂浓度C_1及有机硅单体浓度C_(VTES)的关系为R_p∝C_E~(0.35)C_I~(0.48)C_(VTES)~(-0.64),表观活化能E_a为81.1kJ·mol~(-1)。     

Nanocomposites Produced by Direct Intercalation of Secondary Doped Polyaniline in V2O5

The possibility of the production of nanocomposites based on V₂O₅ and conducting polymers by direct intercalation of macromolecules of secondary doped polyaniline into the interlayer galleries of nanoparticles of aqueous V₂O₅ sol was demonstrated for the first time. The driving force of the intercalation process is substitution of the protons present in the galleries of the V₂O₅ by a polyaniline chain carrying a positive charge.     

有机-无机纳米复合材料光谱与电子性质研究进展

有机-无机纳米复合材料的研究在当前纳米科学技术的发展中占有重要地位，开创了材料与催化科学研究的新纪元。自从10年前首次合成纳米孔无机材料MCM-41至今，该领域研究不断深入，已展现出广阔的应用前景。当客体有机分子分散于纳米孔道内部时，其分子性质将产生明显变化。本文结合作者近期研究成果，力图从实验与理论两方面阐明在纳米复合体系中客体分子性质变化的原因。     

Epoxy‐functionalized,low‐glass‐transition‐temperature latex. II. Interdiffusion versus crosslinking in the presence of a diamine

This article describes the results of experiments examining the competition between the polymer diffusion rate and the crosslinking rate in low‐glass‐transition‐temperature, epoxy‐containing latex films in the presence of a diamine. We examined films formed from donor‐ and acceptor‐labeled poly(butyl acrylate‐co‐methyl methacrylate‐co‐glycidyl methacrylate) copolymer latex and studied the influence of several parameters on the growth rate of gel content and the rate of polymer diffusion. These factors include the molecular weight of the latex polymer, the presence or absence of a diamine crosslinking agent, and the cure protocol. The results were compared to the predictions of a recent theory of the competition between crosslinking and polymer diffusion across interfaces. In the initially formed films, polymer diffusion occurs more rapidly than the chemical reaction rate. Therefore, these films fall into the fast‐diffusion category of this model. In our system (unlike in the model), the latex polymer has a broad distribution of molecular weights and a distribution of diffusivities. The shortest chains contribute to the early time diffusion that we measure. At later stages of our experiment, slower diffusing species contribute to the signal that we measure. The diffusion time decreases substantially, and we observe a crossover to a regime in which the chemical reaction dominates. The increases in chain branching and gel formation bring polymer diffusion to a halt. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4098–4116, 2002