离子液体［bmim］HSO4中合成的苯胺与环氧丙烷共聚物的电催化性能

 采用恒电流电解法,在1-丁基-3-甲基咪唑硫酸氢盐(［bmim］HSO4)离子液体中合成了苯胺与环氧丙烷共聚物(PAN-PPO). 扫描电镜观察表明, PAN-PPO由直径小于80 nm的纳米纤维组成. PAN-PPO对草酸氧化具有较好的电催化活性. 采用电化学原位红外光谱技术对草酸的电催化氧化进行了简单的分析.     

二氧化碳与环氧化物的调节共聚合反应速率

在二氧化碳和环氧化物共聚时加入特定的调节剂，生成有规定的分子量和端基官能度的产物．这种调节聚合的本质是调节剂所含活泼氢与活性中心之间的链转移反应．根据建议的历程，提出了调节共聚速率方程，计算结果与实验一致．     

煤炭液化复合铁系催化剂的研究

用微型高压釜,以杂酚油为溶剂,在反应温度400℃,氢初压6.08MPa,反应时间30分钟的条件下,研究了多种含铁矿物质、复合铁系催化剂对煤炭液化的催化效果。并用高压DTA技术进一步证实了复合铁系催化剂的良好液化加氢活性。     

Electrochemical characteristics of Ce0.8Gd0.2O1.9|La0.6Sr0.4CoO3-δ + Ce0.8Gd0.2O1.9 half-cell

The analysis of the medium temperature half-cell Ce_0.8Gd_0.2O_1.9|70 wt% La_0.6Sr_0.4CoO_3- (LSCO) + 30 wt % Ce_0.8Gd_0.2O_1.9 (CGO) has been made by electrochemical impedance, cyclic voltammetry and chronoamperometry. The shape of complex impedance plots depends on temperature and cathodic polarisation of the electrode. Nyquist (Z, Z-) plots were fitted by equivalent circuit taking into account the electrolyte properties (at very high frequencies), charge transfer process at grain boundaries (at high frequencies), and medium and low frequency O₂ reduction process at the cathode surface and inside the porous cathode material. Two different time constants have been obtained for the cathode process, i.e. for electroreduction of oxygen. It was found that the addition of CGO into the cathode material (LSCO) only somewhat decreases the surface catalytic activity but the noticeably higher low-frequency resistance (i.e. mainly diffusion-like mass transfer resistance R_D) values at lower temperatures have been calculated. It was found that the mainly bulk diffusion-limited process at T773 K deviates toward the kinetically mixed process (diffusion + charge transfer) with increasing temperature.     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.     

Electrochemical Properties of Vanadium Oxide Aerogels and Aerogel Nanocomposites

The electrochemical properties of high surface area transition metal oxide aerogels are extremely interesting because aerogels serve to amplify surface effects. As a result, the electrochemical properties are dominated by surfaces rather than by bulk behavior. In the case of vanadium oxide aerogels this leads to extraordinary electrochemical properties, including an extremely high capacity for lithium and electrochemical responses that are both battery-like and capacitor-like. By exploiting sol-gel synthesis, it is possible to synthesize nanocomposite electrodes in which aerogels are in intimate contact with carbon nanotubes. The resulting nanocomposites exhibit superior electrochemical properties, especially at high discharge.     

A novel vapor phase process for aromatic ketone synthesis

The vapor phase catalytic reaction between aromatic carboxylic acid and acetic acid was investigated. Many metal oxides catalyzed the reaction between 2methylbenzoic acid (OTA) and acetic acid (AA) to produce 2methylacetophenone (OMA), and weakly acidic oxides such as Th, U, Ce, and La oxide exhibited higher yield of OMA. The OMA yield depended on the catalyst support. SiO₂, Al₂O₃, TiO₂, and ZrO₂ with a surface area of less than 200 m² g^–1 appeared to be suitable as industrial catalyst supports. CeO₂ on Al₂O₃was chosen as an industrial catalyst for the synthesis of OMA because of higher productivity, longer catalyst life, and lifting of legal restrictions on catalyst handling. This catalyst system can also be applied to the syntheses of acetophenone, nitroacetophenone, and chloroacetophenone.     

Electrochemical synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in alkaline aqueous solutions containing complexing agents

Ultrafine magnetite particles are prepared through an electrochemical process, at room temperature, from an iron-based electrode immersed in an alkaline aqueous medium containing complexing compounds. XRD and chemical analysis indicate that the product is pure magnetite, Fe₃O₄. The size and morphology of the particles are studied by SEM. The magnetite nanoparticles present a magnetoresistance of almost 3%, at 300 K, under a magnetic field of 1 T. A reactive mechanism for the electrochemical process is proposed.     

Dielectric,magnetic and mechanical properties of ferrite composites

The dielectric and magnetic properties of carbonyl—iron (CI) and nickel zinc ferrite polymer composites were studied with respect to the ferrite particulate content and microwave frequency. From the experimental data and using empirical models that relate the composite dielectric and magnetic properties, the respective dielectric and magnetic properties of the neat fillers were estimated. The tensile properties of the particulate composites comprising CI were shown to follow qualitatively Mooney's equation for the elastic modulus. The tensile strength of an elastomeric polyurethane and PVC composites containing CI increased with particulate content, while the elongation to break decreased with filler content. SEM micrographs of tensile fracture surfaces indicated that somewhat better adhesion is obtained in the case of the polyurethane-based composites compared to the PVC ones.     

Ein neues Kupfercobaltboratoxid mit isolierten B2O5-Baugruppen: Cu2Co(B2O5)O

On a New Copper Cobalt Borate Oxide with Isolated B₂O₅ Units: Cu₂Co(B₂O₅)O Single crystals of a new compound with the empirical formula Cu₂CoB₂O₆ were obtained by using a B₂O₃ flux technique. X-ray single crystal technique led to a new structure type. Cu₂CoB₂O₆ crystallizes monoclinic, space group C-P2₁/c (No. 14); a = 3.2250(6); b = 14.847(1); c = 9.1171(6) Å; β = 93.67°; Z = 4. All metal sites are octahedrally coordinated and form a two dimensional framework consisting of edge sharing octahedra ribbons. In addition one observes isolated B₂O₅-units and oxygen which is not coordinated to boron. The far relation to the crystal structure of the mineral Warwickite is illustrated.