Investigation of the Pore Texture of SnO2-CeO2 Composite Oxides

Gas adsorption techniques have been used to study the pore texture changes occurring in composite SnO₂-CeO₂ materials of varying Sn: Ce atom ratios on calcination at temperatures up to 1273K. The data show that the uncalcined materials are largely microporous in nature, but changes in specific surface area, pore sizes and pore volume occur at an early stage in the calcination process with the formation of mesopores. However, significant changes occur at calcination temperatures>673 K at which point the mesopores are substantially reduced, and at 873 K and above the mean pore size increases greatly finally giving non-porous solids after calcination at 1273 K.     

Preparation and Characterization of Mesoporous Ce0.5Zr0.5O2 Mixed Oxide

Mesoporous （MSU） Ce0.5Zr0.5O2 mixed oxide with a high specific surface area has been synthesized under weak acidic condition in the presence of an anionic surfactant, sodium dodecylbenzenesulfonate. The effect of the pH value on the formation of mesostructure and the thermal stability of the material has been evaluated. The products were characterized by transmission electron microscopy, powder X-ray diffraction and nitrogen adsorption-desorption measurements. The results showed that the as-prepared Ce0.5Zr0.5O2 mixed oxide possessed a specific surface area of 163.3 m^2·g^-1, which had a cubic fluorite-type structure and possessed specific surface areas of 148.4 and 62.4 m^2·g^-1 after calcination at 500 and 800 ℃ for 2 h, respectively. The material showed excellent thermal stability.     

CeO2-TiO2催化剂的表面结构及其湿式氧化活性

 采用溶胶-凝胶法和共沉淀法制备了CeO2-TiO2催化剂,利用N2吸附、X射线衍射、透射电镜、X射线光电子能谱和Zeta电位分析等手段表征了催化剂的表面结构性质. 以乙酸和苯酚为目标物,进行了湿式氧化高浓度乙酸和苯酚的活性测试,研究了CeO2-TiO2催化剂表面结构与活性之间的关系. 结果表明, Ce和Ti之间的相互作用使复合氧化物CeO2-TiO2催化剂具有小的晶粒尺寸和高的比表面积,催化剂表面化学吸附氧含量增加,且不同制备方法得到的CeO2-TiO2催化剂表面电位点不同,共沉淀法制备的催化剂更有利于乙酸和苯酚的吸附. 在湿式氧化反应中, CeO2-TiO2催化剂有较高的活性,其中共沉淀法制备的催化剂活性最高; 在230 ℃, 5 MPa条件下反应120 min后,乙酸COD去除率为79%; 在150 ℃, 4 MPa下反应120 min后,苯酚COD去除率为96%.     

Methane Decomposition over Ni/α-Al_2O_3 Promoted by La_2O_3 and CeO_2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with different contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

纳米CeO_2/PMMA杂化材料的制备与表征

采用在位分散聚合法制备了纳米CeO2 /PMMA杂化材料.XRD分析表明,杂化材料是无定形的.SEM分析表明,杂化材料中CeO2 含量不同,材料的断面形貌明显不同,随CeO2 含量的增加,杂化材料由韧性断裂向脆性断裂转变.EDS面分析表明,Ce在杂化材料中分布均匀.实验表明,随CeO2 含量的增加,杂化材料的透过率和溶解性降低     

Fe/CexZr0.9-xLa0.1O1.95-Al2O3 整体式催化剂上的甲烷催化燃烧反应

 采用共沉淀法制备了一系列 CexZr0.9-xLa0.1O1.95-Al2O3 储氧材料 (其中 CexZr0.9-xLa0.1O1.95 与 Al2O3 的质量比为 1; x = 0, 0.3, 0.5, 0.7 和 0.9), 以其为载体, 制备了一系列负载铁基整体式催化剂. 考察了该系列催化剂催化甲烷燃烧反应性能, 并用低温 N2 吸附-脱附、储氧能力测试、X 射线衍射和 H2 程序升温还原等手段对载体和催化剂进行了表征. 活性测试结果表明, 当 x = 0.7 时, 催化剂活性最高, 可在 V(CH4) = 1% 和 50 000 h1 条件下使甲烷 465 oC 起燃, 615 oC 完全转化. CexZr0.9-xLa0.1O1.95-Al2O3 样品同时具有较高的储氧能力、较高的比表面积和抗热老化能力. 当 x = 0.5 和 0.7 时, 催化剂载体以 CeZrLaAlO 固溶体存在, 抗老化能力最好, 且 x = 0.7 时, 催化剂最易被还原.     

过渡金属-铈基复合氧化物的制备与碳烟燃烧催化性能

采用溶胶凝胶法制备了不同过渡金属TM(Fe,Co,Ni,Mn)-Ce复合氧化物,并经800℃水热处理20 h后得到老化样品。利用XRD,BET对样品结构进行了表征,并采用CO-TPR和TPO分别考察了样品的还原性能和碳烟催化燃烧活性。结果表明,复合氧化物通过过渡金属和铈离子的变价和协同作用,有效地提高了催化剂的碳烟燃烧催化活性。在催化剂-碳烟松散接触条件和含NO+O2气氛下,由于催化剂表面氧的活化和硝酸盐分解释放的NO2,Co-Ce和Mn-Ce具有良好的碳烟燃烧活性。催化剂-碳烟紧密接触和含O2气氛中的活性则与催化剂的比表面积成正比关系,并受活性氧释放能力的影响。