Multimetallic Oxynitrides Nanoparticles for a New Generation of Photocatalysts

A versatile synthetic strategy for the preparation of multimetallic oxynitrides has been designed and here exemplarily discussed considering the preparation of nanoscaled zinc–gallium oxynitrides and zinc–gallium–indium oxynitrides, two important photocatalysts of new generation, which proved to be active in key energy related processes from pollutant decomposition to overall water splitting. The synthesis presented here allows the preparation of small nanoparticles (less than 20 nm in average diameter), well-defined in size and shape, yet highly crystalline and with the highest surface area reported so far (up to 80 m² g⁻¹). X-ray diffraction studies show that the final material is not a mixture of single oxides but a distinctive compound. The photocatalytic properties of the oxynitrides have been tested towards the decomposition of an organic dye (as a model reaction for the decomposition of air pollutants), showing better photocatalytic performances than the corresponding pure phases (reaction constant 0.22 h⁻¹), whereas almost no reaction was observed in absence of catalyst or in the dark. The photocatalysts have been also tested for H₂ evolution (semi-reaction of the water splitting process) with results comparable to the best literature values but leaving room for further improvement.     

溶胶—凝胶法制备钕玻璃纤维

钕玻璃是一种重要的光学材料。它作为激光工作物质已在激光核聚变、中小能量器件、波导激光器和光纤通讯上获得重要的应用。制备钕玻璃及其纤维通常需要在高温熔融状态下进行,操作条件苛刻。溶胶-凝胶法是在较低温度下制备无机材料的新方法,目前正受到人们的重视。     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

A Polymer-Based All-Solid-State Internal Reference System for pH Glass Electrodes – Performance and Charge Transfer

An all-solid-state internal reference system for pH glass electrodes employing polypyrrole (PPy)-Nafion® composites is described. pH sensors based on this reference system are characterised at 23±3°C. The observed characteristics of the resulting all-solid-state sensors, i.e. slope and linearity of the calibration plot, response behaviour, and signal stability, are very promising, and the differences with respect to the parameters of conventional liquid filled sensors are negligible. The values of the zero potential point, which differ from those of conventional pH glass electrodes, could be controlled within limits via the composition of the PPy-Nafion composite.The excellent sensor performance observed seems to be the consequence of a reversible charge transfer between the ion-conducting membrane, the mixed conducting PPy-Nafion interlayer, and the metal wire. A first discussion of the mechanism of this charge transfer is given.     

Development of Na+-sensitive membranes based on sputtered Na-Al-Si glasses

Na⁺-sensitive microdevices are of increasing interest for integration in microanalytical systems e.g. for biomedical applications or for industrial process control. In order to produce ultra thin Na⁺-sensitive layers with fixed and reproducible composition and, in particular, defined Na concentration by means of RF sputtering, an off-axis geometry of a magnetron with cylindrical target was chosen for minimizing back-sputtering effects from the already deposited material. With this inverted cylindrical magnetron (ICM) it was possible to obtain reproducible and controllable sodium aluminosilicate glass layers on semiconductor substrates. Several surface and thin layer analytical techniques were applied for characterization of the membranes and for stoichiometry control. Especially by the non-destructive nuclear reaction analysis method a constant Na profile throughout the glass layer and — together with AES depth profiles — the diffusion barrier effect of an Si₃N₄ interface layer could be verified. Electrochemical measurements proved Nernstian sensitivity down to 10^–4 M Na⁺ in solutions of pH 7, supporting sufficient stability and reproducibility of the sputtered Na⁺-sensitive layers.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

Industrial Application of Hybrid Sol-Gel Coatings for the Decoration of Crystal Glassware

The coloration of glass via melting techniques presents some unique problems with respect to the reproducibility, toxicology and economics of certain colors, especially if the market demands are highly variable. This is also the case for consumer products such as crystal glass and tableware. Traditionally, the decoration of crystal glasses is performed by laborious manual techniques, which are costly and do not meet modern market requirements. Alternatively, spraying of colored lacquers is a highly flexible and valuable tool for the development of new products. Sol-gel type hybrid coatings provide several advantages compared to conventional organic systems like high abrasion resistance, almost perfect adhesion, refractive index matching and sufficient stability in dishwashing procedures. The solubility of organic dyes in the hybrid matrix is sufficient for intense colors even at rather low layer thicknesses, which on the other hand convey the high brilliance of the base material. The development of transparent, translucent and opaque hybrid coatings for crystal glass has been completed in the last few years and the production of partially coated articles has started recently. The synthesis and properties of the coating material are reviewed and the industrial process and first market results are also outlined.     

Inhibition of Pb-Leaching from Lead Crystal Glass by Coating with Films Prepared by the Sol-Gel Method

The chemical durability of lead glass tumblers (24% PbO) in a 4% (v/v) acetic acid solution before and after coating with sol-gel derived SiO2 films was assessed to determine the extent of reduction in Pb-leaching that can be achieved. It was found that by coating the internal surface of the glass tumblers with 1 ml of 10% TEOS solutions at 100°C and densifying the coating formed at 500°C for 1 h, it was possible to reduce Pb-leaching to about one quarter of that of the uncoated glass.     

Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.