部分水解聚丙烯酰胺在多孔介质中的静态吸附研究——水解度对吸附量的影响

部分水解聚丙烯酰胺在多孔介质中的静态吸附研究———水解度对吸附量的影响杨继萍李惠生黄鹏程（北京理工大学化工与材料学院北京１０００８１）（北京航空航天大学材料科学与工程系北京１０００８３）关键词部分水解聚丙烯酰胺，水解度，多孔介质，静态吸附聚合物作为...     

Interactions between Adsorbed Layers of a Low Charge Density Cationic Polyelectrolyte on Mica in the Absence and Presence of Anionic Surfactant

Interactions between two negatively charged mica surfaces across aqueous solutions containing various amounts of a 10% charged cationic polyelectrolyte have been studied. It is found that the mica surface charge is neutralized when the polyelectrolyte is adsorbed from a 10–50 ppm aqueous solution. Consequently no electrostatic double-layer force is observed. Instead an attractive force acts between the surfaces in the distance regime 250–100 Å. We suggest that this attraction is caused by bridging. Additional adsorption takes place when the polyelectrolyte concentration is increased to 100 and 300 ppm, and a long-range repulsion develops. This repulsive force is both of electrostatic and steric origin. The polyelectrolyte layer adsorbed from a 50 ppm solution does not desorb when the polyelectrolyte solution is replaced with an aqueous polyelectrolyte-free solution. Injection of sodium dodecyl sulfate (SDS) into the measuring chamber to a concentration of about 0.01 CMC (8.3 × 10⁻⁵M) does not affect the adsorbed layers or the interaction forces. However, when the SDS concentration is increased to 0.02 CMC (0.166 mM) the adsorbed layer expands dramatically due to adsorption of SDS to the polyelectrolyte chains. The sudden swelling suggests a cooperative adsorption of SDS to the preadsorbed polyelectrolyte layer and that the critical aggregation concentration between the polyelectrolyte and SDS at the surface is about 0.02 CMC. The flocculation behavior of the polyelectrolyte in solution upon addition of SDS was also examined. It was found that 0.16–0.32 mol SDS/mol charged segments on the polyelectrolyte is enough to make the solution slightly turbid.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Cr(Ⅵ)离子在CdS催化剂上的吸附及光催化还原

Cr(Ⅵ)在CdS光催化剂上具有较强的暗态吸附,适当的热处理会增强Cr(Ⅵ)离子的吸附;在未经热处理的CdS催化剂上,Cr(Ⅵ)的吸附表现为接近于一个吸附单层的特征,而当催化剂经过了300℃的热处理,Cr(Ⅵ)离子在催化剂表面上的吸附会增加,吸附表现为超过一个单层的特征。热处理过程同样会增加催化剂的光催化活性。对于整个光催化反应而言,吸附过程是反应的控制步骤。Cr(Ⅵ)的光催化还原伴随CdS催化剂的光腐蚀。     

Rh/Al2O3上CO和NO的吸附性能及相互作用

利用ＴＰ－ＩＲ动态方法研究了ＣＯ和ＮＯ在Ｒｈ／Ａｌ２Ｏ３上吸附性能和相互作用的动态行为，结果表明，Ｒｈ／Ａｌ２Ｏ３的孪生中心对ＣＯ的吸附强于对ＮＯ的吸会，线式和桥式中心则对ＮＯ的吸附强于对ＣＯ的吸附，ＣＯ和ＮＯ共吸附－ＴＰ（ＣＯ和ＮＯ中）－ＩＲ动态过程结果揭示出２２２４ｃｍ＾－１谱带的出现和强度的增加与孪生ＣＯ谱带以及吸附的ＮＯ谱带的强度减弱同时发生，表明是由吸附的ＮＯ和孪生ＣＯ形成Ｒｈ－ＮＣＯ。     

Cationic dye adsorption by acrylamide/itaconic acid hydrogels in aqueous solutions

Acrylamide/itaconic acid (AAm/IA) hydrogels containing different quantities of itaconic acid have been irradiated with γ radiation. The hydrogels were used in an experiment concerning the adsorption of cationic dyes such as Basic Blue 9, Basic Violet 1 and Basic Blue 12. In the experiments of the adsorption of dyes from their synthetic aqueous solutions, type S adsorption isotherms were found. One mole of monomeric unit of AAm/IA hydrogels adsorbed 78.5–513.1 μmole of Basic Blue 9, 60.2–641.1 μmole of Basic Violet 1 and, 28.8–593.3 μmole of Basic Blue 12, while acrylamide hydrogel did not adsorb any cationic dye. As a result, it was shown that the AAm/IA hydrogels could be used as an adsorbent for water pollutants such as dyes, and immobilization of these organic contaminants in the hydrogels from waste water can solve one of the most important environmental problems of the textile industry. © 1997 John Wiley & Sons, Ltd.     

Study of Mono- and Bimetallic Fe and Mn Oxide-Supported Clinoptilolite for Improved Pb(II) Removal

A cost-effective, iron- and manganese-oxide-supported clinoptilolite-based rock was prepared. Based on its nanoporous structure, it worked as a nanoreactor, thereby providing enhanced functionalities. The mono- and bimetallic Fe- and Mn-oxide-supported clinoptilolite was thoroughly characterized with thermoanalytical FT-IR, XRD, SEM, and XPS spectroscopy. All the spectral procedures that were used confirmed the occurrence of a new MnO₂ phase (predominantly birnessite), including mostly amorphous iron oxi(hydr)oxide (FeO(OH)) species on the surface of the above-synthesized adsorbents. The synthesized products validated a considerably higher adsorption capacity toward Pb(II) pollutants compared to the natural clinoptilolite. The following order of a(max) toward Pb(II) was found: MnOx-zeolite (202.1 mg/g) > FeO(OH)-MnOx-zeolite (101.3 mg/g) > FeO(OH)-zeolite (80 mg/g) > natural zeolite (54.9 mg/g). The adsorption equilibrium data were analyzed by the two-parameter empirical isotherm models Langmuir, Freundlich, and BET as well as the three-parameter Redlich–Peterson isotherm.     

Self-Assembly of 1D Double-Chain and 3D Diamondoid Networks of Lanthanide Coordination Polymers through In Situ-Generated Ligands: High-Pressure CO2 Adsorption and Photoluminescence Properties

Two new lanthanide-based coordination polymers, [Sm₂(bzz)(ben)₆(H₂O)₃]·0.5H₂O (1) and [Eu(bbz)(ben)₃] (2), were synthesized and characterized. The described products were formed from in situ-generated benzoate (ben) and N’-benzoylbenzohydrazide (bbz) ligands, which were the products of transformation of originally added benzhydrazide (bzz) under hydrothermal conditions. Compound 1 exhibits a one-dimensional (1D) double-chain structure built up from the connection of the central Sm³⁺ ions with a mixture of bzz and ben ligands. On the other hand, 2 features a 3D network with a 4-connected (6⁶) dia topology constructed from dinuclear [Eu₂(ben)₆] secondary building units and bbz linkers. High-pressure CO₂ sorption studies of activated 1 show that maximum uptake increases to exceptionally high values of 376.7 cm³ g⁻¹ (42.5 wt%) under a pressure of 50 bar at 298 K with good recyclability. Meanwhile, 2 shows a typical red emission in the solid state at room temperature with the decay lifetime of 1.2 ms.     

Magnesium-Free Immobilization of DNA Origami Nanostructures at Mica Surfaces for Atomic Force Microscopy

DNA origami nanostructures (DONs) are promising substrates for the single-molecule investigation of biomolecular reactions and dynamics by in situ atomic force microscopy (AFM). For this, they are typically immobilized on mica substrates by adding millimolar concentrations of Mg²⁺ ions to the sample solution, which enable the adsorption of the negatively charged DONs at the like-charged mica surface. These non-physiological Mg²⁺ concentrations, however, present a serious limitation in such experiments as they may interfere with the reactions and processes under investigation. Therefore, we here evaluate three approaches to efficiently immobilize DONs at mica surfaces under essentially Mg²⁺-free conditions. These approaches rely on the pre-adsorption of different multivalent cations, i.e., Ni²⁺, poly-l-lysine (PLL), and spermidine (Spdn). DON adsorption is studied in phosphate-buffered saline (PBS) and pure water. In general, Ni²⁺ shows the worst performance with heavily deformed DONs. For 2D DON triangles, adsorption at PLL- and in particular Spdn-modified mica may outperform even Mg²⁺-mediated adsorption in terms of surface coverage, depending on the employed solution. For 3D six-helix bundles, less pronounced differences between the individual strategies are observed. Our results provide some general guidance for the immobilization of DONs at mica surfaces under Mg²⁺-free conditions and may aid future in situ AFM studies.