Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.     

Thermal-Adsorptive Concentration

Methods for concentrating dilute fluids using adsorption followed by partial thermal regeneration were studied using the simulation package ADSIM. The systems studied were NaCl in liquid water on Amberlite XD-2 resin and benzene vapor in nitrogen on activated carbon. Cycles studied included counter-current regeneration with pure hot fluid, co-current regeneration with pure hot fluid, a new process called Hot Feed Addition (HFA) consisting of co-current regeneration with pure hot fluid followed by hot feed, and cycling zone adsorption (co-current alternating hot and cold feeds with no pure regeneration fluid). The optimum system depends upon the conditions of the system and the value function chosen to evaluate the systems. For example, for benzene in nitrogen with hot regeneration gas at 467.4 K, cycling zone adsorption used no carrier gas, had the most concentrated benzene stream and a very pure nitrogen product, but the energy use was greater than the other processes. For liquid systems counter-current operation could produce the purest product, but regenerant requirements were high. With slightly lower purity requirements HFA reduced solvent usage and increased the concentration of the concentrated waste stream. For the liquid system all processes used approximately 3% or less of the energy that would be required for evaporation.     

Adsorption of organic substances on broken clay surfaces: a quantum chemical study

Hydrogen-bonded interactions between local defect structures on broken clay surfaces modeled as molecular clusters and the organic molecules acetic acid, acetate, and N-methylacetamide (NMA) have been investigated. Density functional theory and polarized basis sets have been used for the computation of optimized interaction complexes and formation energies. The activity of the defect structures has been characterized as physical or chemical in terms of the strength of the hydrogen bonds formed. Chemical defects lead to significantly enhanced interactions with stronger hydrogen bonds and larger elongation of OH bonds in comparison to the physical defects. The type of interaction with the defect structure significantly influences the planarity of the model peptide bond in NMA. Both cases, enhancement of the planarity by increase of the CN double bond character and strong deviations from planarity, are observed.     

Adsorption parameters of cyclobutane carboxylic acid at the interface of a mercury electrode with aqueous solutions of 0.4 M Na2SO4 + 0.1 M H2SO4

Based on the results of the regression analysis of differential capacitance curves of a mercury electrode in solutions of cyclobutane carboxylic acid (CBCA) at 25, 50, and 75°C, the adsorption parameters that enter into both the Frumkin isotherm and the model of two parallel capacitors are estimated. The free energies of adsorption found from the analysis of the temperature dependence of these parameters are incorrect due to the partial blowing out of CBCA during the deaeration of the solutions. The corresponding adsorption parameters are corrected under the assumption that the hydrophobic effect associated with the increase in the liquid-water entropy at the removal from it of CBCA molecules is the same as for n-valeric acid. The physical meaning of the squeezing-out effect is revised.     

微量热法研究γ-Mo2N催化剂表面氢的微分吸附热

Differential heats of H 2 adsorption on γ-Mo2N catalysts were studied by using microcalorimetry. Samples with high and medium surface areas (90 and 17 m2•g -1 ) present a homogeneous energetic distribution of surface sites, which corresponds with the preferential orientation of their (200) planes. Molybdenum nitride with low surface area (8 m2•g -1 ) displays a heterogeneous energetic distribution of H 2 adsorption sites. The higher initial differential heat of hydrogen adsorption observed for the low surface Mo nitride was attributed to species adsorbed on surface sites associated with the (111) plane.     

Structural and Adsorptive Characteristics of Pyrocarbon/Silica Gel Si-60

Pyrocarbon/silica gel adsorbents (carbosils, CS) with mesoporous Si-60 (Merck, granule size 0.2–0.5 mm) modified by pyrolysis of CH₂Cl₂ at 823 K and reaction time from 0.5 to 6 h and then hydrothermally treated at 473 K for 6 h were studied by means of TEM, adsorption and ¹H NMR methods. Changes in the structural and adsorptive characteristics of hybrid adsorbents before and after hydrothermal treatment, which depend on pyrocarbon content (C _C), were analyzed on the basis of TEM micrographs and p-nitrophenol and nitrogen adsorption isotherms treated using a constrained regularization method. Interfacial water layers in aqueous suspension of CS were investigated by means of ¹H NMR with freezing-out of bulk water at T < 273 K showing nonlinear changes in the Gibbs free energy of interfacial water with increasing C _C because of nonlinear dependence of the structural characteristics of pyrocarbon deposits and CS as a whole on C _C.     

Dissociation equilibrium between uncharged and charged local anesthetic lidocaine in a surface-adsorbed film

The dissociation equilibrium between uncharged local anesthetic lidocaine (LC) and charged local anesthetic LC (LCH⁺) in a surface-adsorbed film was investigated by measuring the surface tension and pH of aqueous solutions of a mixture of hydrochloric acid and LC. The surface tension values decreased slightly with increasing total molality m_t at 0X₂0.5, where X₂ is the mole fraction of LC in the mixture, while they decreased rapidly with increasing m_t at 0.5<X₂1. It was shown from the pH measurements that almost all LC molecules were changed into LCH⁺ ions by protonation at 0X₂0.5 and both forms coexisted only at 0.5<X₂1. The quantities of the respective LC and LCH⁺ transferred from the aqueous solution to the adsorbed film, i.e., their surface densities, were calculated by applying the thermodynamic equations derived to the surface tension and pH data. A greater quantity of LC than LCH⁺ existed in the adsorbed film at the coexisting composition. The partitioning behavior of LC and LCH⁺ in the adsorbed film was characterized by three composition regions: (1) slight partitioning of low surface-active LCH⁺ in the region at 0X₂0.5, (2) preferential partitioning of LC at 0.5<X₂<around 0.7, and (3) negative partitioning of LCH⁺ at around 0.7X₂1. The present results clearly indicate that uncharged local anesthetics transfer into hydrophobic environments such as cell membranes more than charged ones.     

基于离子液体的炭材料制备、改性及应用

离子液体因其熔点低、液态温域宽、蒸气压低、热稳定性高、电导率高、电化学窗口宽、结构可设计及对许多化合物的亲和性等系列性能而引起人们广泛关注。离子液体在炭材料制备、改性领域展示出了良好的前景及巨大的应用潜力,可直接作为碳源,经过高温炭化实现杂原子掺杂制备多孔炭材料;离子液体也可充当反应介质和致孔剂,将生物质转化为多孔炭材料;此外,由于离子液体与炭材料相容性较好,可以用于多孔炭材料改性制备炭复合材料。基于离子液体的炭材料在电催化、超级电容器、吸附分离及生物医学等领域具有潜在的应用价值。本文总结了基于离子液体炭材料的制备、改性及应用最新研究进展,并着重介绍了其在能源和环境相关领域的应用。     

A simplified integral equation for adsorption of gas mixtures on heterogeneous surfaces

Summary The multiple integral representing the overall isotherm for adsorption of gas mixtures on heterogeneous surfaces is transformed to a single integral, which is promising for predicting the mixed-gas adsorption by means of single-gas adsorption parameters. This transformation is possible when the adsorption energies of components for various adsorption sites show a certain type of correlation.

---

Eine vereinfachte Integralgleichung für die Adsorption von Gasmischungen auf heterogenen Oberflächen

Zusammenfassung Das multiple Integral, das die Adsorption von Gasmischungen auf heterogenen Oberflächen darstellt, wurde zu einem einfachen Integral transformiert, das zur Voraussage der Adsorption von Gasgemischen mittels der Einzelgas-Adsorptionsparameter geeignet sein sollte. Diese Transformation ist dann möglich, wenn die Adsorptionsenergien der Komponenten einem bestimmten Korrelationstyp angehören.

     

Calorimetric investigation of the adsorption of binary vapour mixtures of tetrahydropyrrol with methanol and cyclopentane on the homogeneous surface

Adsorption isotherms and differential heats of adsorption of tetrahydropyrrol (THP) and cyclopentane CP), as well as THP and methanol mixtures (mole ratio 1∶1, 1∶2 and 1∶4) on the graphitized carbon black Sterling MT surface were determined. The influence of dilution of [THP] on its ability to undergo homomolecular association was tested. Even 1∶4 dilution of THP does not prevent is association. Methanol strongly interacts with THP in the mixed adsorbed layer forming heteromolecular associates.