Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst.The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS.Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature,and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts.Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

聚丙烯酰胺水溶液的流变性质

粘性指进现象;聚丙烯酰胺水溶液的流变性质     

新型含金属元素二胺的合成与表征

本文分别用液相法和固相法合成了一系列含不同金属元素的二胺,并通过红外光谱,~1HNMR、~(13)CNMR,紫外光谱,电化学分析及元素分析对其进行表征,还通过DSC和TG对其热性能进行了研究,结果发现这些二胺具有良好的耐热性,是合成一些耐热高聚物的优良原料.     

多检测GPC/SEC技术在高分子表征中的应用Ⅳ.氘化高分子的溶液性质

采用体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测联用技术表征了氘化聚苯乙烯、聚苯乙烯和氘化聚苯乙烯－ 聚异戊二烯。结果表明,在θ条件下,虽然氘化聚苯乙烯的化学依赖性常数υＴ,ＤＰＳ比聚苯乙烯的化学依赖性常数υＴ,ＰＳ大,但２５ ℃时在四氢呋喃中,氘化聚苯乙烯的分子尺寸仍小于聚苯乙烯的分子尺寸。由于嵌段共聚物的淋洗体积随组成变化,所以用传统的ＳＥＣ／ＲＩ得不到准确的分子量。经比较膜渗透、小角激光光散射和基质辅助激光脱吸与离子化时间飞行质谱等的实验结果,证明体积排斥色谱法／ 示差折光指数／ 直角激光光散射／ 示差粘度三检测技术能准确地得到氘化二嵌段共聚物的分子量以及其它重要信息。     

四丁基碘化铵催化甲基丙烯酸甲酯的可逆-休眠自由基溶液聚合

以四丁基碘化铵(BNI) 为有机催化剂, 碘单质(I₂) 与偶氮二异庚腈(ABVN) 原位生成的碘代异庚腈为引发剂, 进行甲基丙烯酸甲酯(MMA) 的溶液聚合. 以甲苯为溶剂, MMA:I₂:ABVN的摩尔比为200:1:1.7, 考察了催化剂用量对聚合的影响. 结果表明, 加入催化剂可以缩短诱导期, 当I₂:BNI摩尔比为1:1时聚合反应的诱导期最短(1.7 h); 当BNI:I₂摩尔比为0.25:1~2:1之间时, 聚合物实测分子量与理论值十分接近, 分子量分布较窄, 分子量分布指数(M_w/M_n) 多在1.2以下. 考察了在N,N'-二甲基甲酰胺(DMF)、 四氢呋喃(THF)、 苯甲醚、 苯和甲苯5种溶剂中的聚合反应, 发现在苯和甲苯中聚合可控性最佳, M_w/M_n多在1.2以下; 苯甲醚和THF中聚合速率较快, 聚合物分子量分布较苯中的略宽. 以DMF为溶剂时所得聚合物分子量分布很宽, 聚合可控性差. 核磁共振分析聚合物为碘封端结构, 碘原子封端的聚合物链所占比为91.6%.     

BiOCl0.5Br0.5/BiPO4双层异质结薄膜光催化剂的一步电化学法制备及性能

采用一步电化学法在金属 Bi板上成功制备了 Bi OCl_0.5Br_0.5/Bi PO₄双层异质结薄膜,并通过多种表征手段对薄膜的晶型结构、元素组成及化合价、形貌和尺寸特征、吸光性能和荧光强度进行了表征。结果表明,制备得到的复合薄膜呈现出上层为梭子状的 Bi PO₄颗粒层分散在下层为 Bi OCl_0.5Br_0.5固溶体层的双层结构。这样的双层膜排列顺序使得光生电子和空穴在不同组分之间的界面电场作用下分别向薄膜两侧流动,促进光致载流子的分离,提高了 Bi OCl_0.5Br_0.5/Bi PO₄复合薄膜的光催化活性。活性测试结果表明,在模拟太阳光照射 120 min 后,Bi OCl_0.5Br_0.5/Bi PO₄复合薄膜对苯酚的降解率达到了 99.97%,是相同条件下制备的 Bi OCl/Bi PO₄和 Bi O...     

高光效高热稳定性蓝色荧光粉Ca2-ySrySiO4:Ce3+,Li+的组成筛选和发光机理

采用高温固相法合成了一系列Ca_(2-x-y)Sr_(y-x)SiO_4∶x Ce~(3+),x Li~+蓝色固溶体荧光粉。XRD结果表明,所合成的固溶体荧光粉均为单一物相。随着Sr~(2+)成分的增加,Ca_(2-y)Sr_y SiO_4物相从单斜晶系β-Ca_2SiO_4向正交晶系α′-Ca_2SiO_4转变,发射光谱逐渐红移。组成为Ca_(1.75)Sr_(0.25)SiO_4时,荧光粉的发射波长最长(454 nm),Stokes位移最大。基质为Ca_(1.1)Sr_(0.9)SiO_4的晶体结构可诱导掺杂离子Ce~(3+)取代SrO_(10)格位、Li~+取代CaO8格位。优化的荧光粉Ca_(1.05)Sr_(0.85)SiO_4∶0.05Ce~(3+),0.05Li~+(CS_(0.85)SO∶CeLi)在375 nm紫外光激发下,发射445 nm的蓝光,内量子效率(IQE)达到91.18%,200℃时发射强度保持室温发光强度的98.70%。根据晶体结构、晶体场分裂和掺杂离子质心位移等理论,讨论了CS_(0.85)SO∶CeLi综合发光效应最佳的内在原因。     

Pt/CexZr1-xO2催化剂上丙烷完全氧化性能研究

采用沉淀法制备了ZrO2,CeO2和Ce0.7Zr0.3O2载体,并用浸渍法制备负载型Pt催化剂。考察了500和900℃焙烧催化剂的丙烷完全氧化性能和水汽对丙烷氧化反应的影响。对于500℃焙烧的催化剂,催化剂的丙烷氧化活性顺序为:Pt/ZrO2-500>Pt/CeO2-500>Pt/Ce0.7Zr0.3O2-500;而经900℃焙烧的催化剂活性顺序为:Pt/ZrO2-900>Pt/Ce0.7Zr0.3O2-900>Pt/CeO2-900。反应气氛中水汽的存在对两种Pt/ZrO2催化剂的活性均有抑制作用(T50温度均提高了10~15℃);而对于Pt/CeO2-500催化剂有抑制作用(T50温度提高10℃),但对Pt/CeO2-900催化剂活性有促进作用(T50温度下降25℃);对于两种Pt/Ce0.7Zr0.3O2催化剂活性具有促进作用(T50温度均下降5~25℃)。表征结果表明催化剂的活性与其表面Pt物种价态密切相关,催化剂表面上Pt0物种有利于活性的提高。Pt/Ce0.7Zr0.3O2-500催化剂中只含有氧化态Pt物种(Pt^2+),而Pt/Ce0.7Zr0.3O2-900催化剂中则含有部分金属态Pt物种,因此其活性高于Pt/Ce0.7Zr0.3O2-500催化剂。