Synthesis of multi‐functionalized carbonyl compounds by palladium–catalysed γ‐substitution of MBH adducts with activated amides

Catalytic allylic γ‐substitution with Morita‐Baylis‐Hillman (MBH) adducts for creating a new family of unsymmetrical dicarbonyl compounds was presented in this work, in which a variety of allylated amide products were achieved in good yields and high regioselectivity with excellent linear‐to‐branched ratios. Especially, it was found that the Pd/HZNU‐Phos complex exhibited remarkably high activity (with a TON up to 16800) in this transformation between dicarbonyl amides and MBH adducts. In addition, the possibly multisite interaction between multifunctional Pd/HZNU‐Phos catalyst system and substrates might responsible for its exceptionally high efficiency in this reaction.     

Water‐Soluble Luminescent Hybrid Composites Consisting of Oligosilsesquioxanes and Lanthanide Complexes and their Sensing Ability for Cu2+

Water‐soluble hybrid composites with great potential for selective and sensitive sensing and that are obtained through simple, rapid, and environmentally friendly methods are highly desirable and remain a challenging task. Herein, we present luminescent hybrid composites that were realized by linking Na₃[Ln(dpa)₃] (dpa=2,6‐pyridinedicarboxylic acid) to octa‐amino functionalized polyhedral oligomeric silsesquioxane (POSS‐NH₂) through hydrogen‐bonding interactions between the oxygen atoms of the carboxylate groups of dpa and the hydrogen‐bond‐donor amino groups. The resulting hybrid composites Ln(dpa)₃@POSS‐NH₂ are highly soluble in aqueous solutions and the quantum yield of Eu(dpa)₃@POSS‐NH₂ is as high as 56.5 % or 46.3 % in the solid state and in aqueous solution, respectively, as determined by using the integrating sphere method. The novel water‐soluble luminescent hybrid composites exhibit high thermal and photostability, and the emitted colors of the resulting hybrid composite can be finely tuned by changing the Eu³⁺/Tb³⁺ ratio. Interestingly, Eu(dpa)₃@POSS‐NH₂ hybrid composites exhibited an effective switch‐off fluorescence response to Cu²⁺ over other common metal ions in aqueous media.     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Oxygen Barrier Properties of Waterborne Polyurethane/Silica Hybrids

The oxygen barrier properties of films obtained from waterborne polyurethane/silica hybrid dispersions were analyzed. Two different types of polyurethanes were used, based on poly(propylene glycol) and poly(1,4-butylene adipate). Three different strategies were followed in the preparation of the hybrid dispersions. In the first type of materials (series 1), the inorganic part came exclusively from the covalent incorporation of trifunctional silane groups into the polymeric chains. The other two series contained, in addition to the trifunctional silane groups, tetrafunctional silane groups either physically blended (series 2) or “in situ” generated (series 3). Materials of series 1 showed an increase of the oxygen permeability coefficient with the silane content. However, the other two types of materials presented just the opposite dependence. In this latter case, the systems containing “in situ” generated silica (series 3) presented higher permeability coefficient values, probably because of the steric hindrance imposed by the polyurethane that gave rise to silica networks containing silanol groups and free volume holes. Moreover, lower permeability coefficient values were obtained when larger size particles were added. This fact could mean that the polyurethane/silica interface effects were not totally hindered even when the organic/inorganic phases were covalently bonded.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Synthesis of N-Acyl Triazolyl-Pyrazolines via Acylation Initiated by the Hydrazone Moiety with Carboxylic Acids

An efficient synthesis of N-acyl/N-substituted acyl pyrazolines and their triazole hybrids have been accomplished via acylation of pyrazolines and pyrazoline-triazole hybrids with carboxylic acids and/or substituted carboxylic acids in the absence of activating agents/catalysts. In the present study, a mechanism envisaging the in situ generation of a new transient acylating intermediate has been proposed to explain the acylation.     

Organic–Inorganic Hybrid Supermicroporous Iron(III) Phosphonate Nanoparticles as an Efficient Catalyst for the Synthesis of Biofuels

Here we report a novel family of crystalline, supermicroporous iron(III) phosphonate nanomaterials (HFeP‐1‐3, HFeP‐1‐2, and HFeP‐1‐4) with different Fe^III‐to‐organophosphonate ligand mole ratios. The materials were synthesized by using a hydrothermal reaction between benzene‐1,3,5‐triphosphonic acid and iron(III) chloride under acidic conditions (pH≈4.0). Powder X‐ray diffraction, N₂ sorption, transmission and scanning electron microscopy (TEM and SEM) image analysis, thermogravimetric and differential thermal analysis (TGA‐DTA), and FTIR spectroscopic tools were used to characterize the materials. The triclinic crystal phase [P$\bar 1$ (2) space group] of the hybrid iron phosphonate was established by a Rietveld refinement of the PXRD analysis of HFeP‐1‐3 by using the MAUD program. The unit cell parameters are a=8.749(1), b=8.578(1), c=17.725(3) Å; α=104.47(3), β=97.64(1), γ=113.56(3)°; and V=1013.41 ų. With these crystal parameters, we proposed an 24‐membered‐ring open framework structure for HFeP‐1. Compound HFeP‐1‐3, with an starting Fe/ligand molar ratio of 3.0, shows the highest Brunauer–Emmett–Telller (BET) surface area of 556 m²g^?1 and uniform supermicropores of approximately 1.1 nm. The acidic surface of the porous iron(III) phosphonate nanoparticles was used in a highly efficient and recyclable catalytic transesterification reaction for the synthesis of biofuels under mild reaction conditions.     

Design,synthesis, and characterization of fullerene–peptide–steroid covalent hybrids

The present study reports the synthesis, spectral characterization, self-assembly properties, and preliminary in vitro study of antioxidant capacity of two triple covalent hybrids consisting of fullerene C₆₀, peptide, and steroidal moiety. Previously synthesized fulleropyrrolidinic acid and pregnenolone were connected by peptide linker using a multistep DCC/DMAP and/or EDC/HOBT esterification/amidation procedure. The hybrids were characterized by comparative analysis of spectroscopic data obtained from FTIR, UV–vis, HRMS, and extensive NMR experiments (¹H, ¹³C, COSY, HSQC, and HMBC). The self-assembling properties and morphology of triads samples prepared by drop-drying method were examined by scanning electron microscopy (SEM). Preliminary in vitro antioxidant activity was studied by Ferrous ion Oxidation-Xylenol orange (FOX) method.     

Metal-facilitated Photocatalytic Nanohybrids: Rational Design and Promising Environmental Applications

As a promising technique to potentially address the energy crisis and environmental issues, photocatalysis has been reported widely to exhibit various outstanding behaviors in production of new fuels/chemicals and treatment of contaminants. The photocatalytic performance is extremely dependent on the used photocatalysts, so that the design and preparation of efficient photocatalysts are critically important for significantly improving the photocatalytic activity. Among various strategies, the hybridization of metal with semiconductors has recently been attracting more and more research interest owing to their expended spectral absorption, promoted transferring rate of charge carriers and Plasmon-enhanced effect. In this minireview, the metal-facilitated hybrid photocatalysts are overviewed comprehensively to first reveal unique functions of metals in improvement of photoactivity and summarize the emerging metal-involved hybrid systems. Subsequently, the synthetic methods towards hybrid photocatalysts are introduced and their practical applications are emphasized in environmental remediation including degradation of organic pollutants, conversion of harmful gases, treatment of heavy metal ions and sterilization of bacteria. At the end, the challenges for industrializing these hybrid photocatalysts are discussed carefully and future development is suggested rationally.