Triterpene Glycosides of Scheffleropsis angkae. IV. Structure of Glycosides L-C2 and L-I2

Two new triterpene glycosides of the -amyrin series, L-C ₂ and L-I ₂ , 27-hydroxyursolic acid 3-O--L-arabinopyranoside and its 28-O--L-rhamnopyranosyl-(14)-O--D-glucopyranosyl-(16)-O--D-glucopyranosyl ester, are isolated from leaves ofScheffleropsis angkae(Araliaceae). The structures of the glycosides are established using chemical methods and NMR techniques ( ¹ H, ¹³ C, ¹³ C-APT, COSY, TOCSY, HSQC, HMBC, and ROESY).     

Triterpene Glycosides of Tetrapanax papyriferum. I. Isolation and Structure of Glycosides St-H2 and St-I2 from Stem Bark

Stem bark ofTetrapanax papyriferumC. Koch., Araliaceae, yielded new triterpene glycosides 28-O--L-rhamnopyranosyl-(14)-O-(6-O-acetyl--D-glucopyranosyl)-(16)-O--D-glucopyranosyl esters of the 3-O-[-D-glucopyranosyl-(13)-[-D-galactopyranosyl-(12)]-O--L-arabinopyranosides of oleanolic and echinocystic acids. The structures of these substances were established using chemical and physicochemical methods     

Continuous cellulose fiber-reinforced cellulose ester composites III. Commercial matrix and fiber options

Thermoplastic composites were prepared using two continuous regenerated cellulose fiber types, rayon and lyocell, and with several different commercially-available thermoplastic cellulose esters as matrix. Matrix options included cellulose acetate propionate (CAP), and several cellulose acetate butyrates (CAB) with different butyryl content, having different molecular weights and different methods of plasticization (adipates and very low molecular weight cellulose ester fractions). Choice of cellulose ester type was generally found to have little or no effect on mechanical properties. A significant effect, however, was revealed for fiber type. The lyocell-based composites thereby were reflective of the greater stiffness of a fiber produced from anisotropic solution state. Their modulus consistently exceeded 20GPa whereas the rayon fiber-based composites had moduli between 6 and 8GPa. The latter, however, possessed failure strains that were 3 to 4 times greater than their stiffer counterparts.     

Structure of liquid-crystalline phases formed by N-acetyl-L-glutamic acid oligomeric benzyl esters –2H NMR study

A series of N-acetyl-L-glutamic acid oligopeptide benzyl esters with exact residue numbers 4, 6, and 12 has been synthesized by a stepwise procedure. For these oligopeptide–dioxane binary systems, the behavior of the liquid-crystalline phases has been examined␣by the use of ²H NMR, and the results indicate that highly ordered aggregates formed by these oligopeptides in dioxane are in an alignment similar to that in a nematic mesophase. Received: 27 February 2001 Accepted: 8 May 2001     

Study on properties of flame‐retardant cyanate esters modified with DOPO and triazine compounds

Ternary flame‐retardant modified cyanate ester blends (CEPG and CEPA) are formed by combining triazine compounds (TGIC or TAIC) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide with cyanate ester resin. The curing behaviors, thermal and mechanical properties, and the flame‐retardant properties are investigated. The results show that the CEPG and CEPA blends result in lower curing temperatures and glass transition temperatures than those of neat CE. Both of CEPG and CEPA blends significantly improve the flame‐retardant properties of CE resins, and UL‐94V‐0 rate is achieved for CEPG‐1.0 and CEPA‐0.5. The dielectric constant and loss of CEPA blends are lower than those of CEPG blend with the same phosphors content, and both of them are lower than those of neat CE. Therefore, the ternary flame‐retardant modified cyanate ester blends provide 2 ways for composites of producing printed circuit board with high flame‐retardant property and low dielectric constant and loss.     

铜钼组分对γ-Al2O3负载镍催化剂脂肪酸甲酯加氢脱氧性能的影响

制备一系列包含或不包含铜、钼组分的Ni/γ-Al₂O₃催化剂,并对其进行表征和性能测试。考察了铜、钼负载量,浸渍顺序（包括连续浸渍和共浸渍）,反应条件对脂肪酸甲酯加氢脱氧反应性能的影响。根据TG数据,使用过的20Ni-6Cu/γ-Al₂O₃催化剂其热失重小于20Ni/γ-Al₂O₃催化剂,这表明,铜的引入能够有效抑制反应过程中催化剂表面的积炭行为。对于20Ni-6Cu/γ-Al₂O₃和20Ni-6Cu-nMo/γ-Al₂O₃（n=2、5、8和12）催化剂,NH₃-TPD分析结果显示,钼物相的引入对载体γ-Al₂O₃的酸性位有着显著影响,当钼负载量达到5%时,可以观察到一个新的酸位对应于中强酸位。铜和钼修饰过的催化剂其催化性能要高于Ni/γ-Al₂O₃催化剂。从XPS的分析可以看出,催化剂中的铜主要以正二价形式存在,钼主要以正四价和正六价形式存在,而且不同的浸渍顺序会影响催化剂表面活性组分的实际含量。此外,脂肪酸甲酯的转化率和烷烃产品的收率也和所制备出来的催化剂的浸渍顺序有关。在所有的催化剂中,使用连续浸渍（先浸渍镍铜组分、浸渍钼组分）所制备的三金属20Ni-6Cu-5Mo/γ-Al₂O₃催化剂展现了优异的催化性能。在适宜的反应条件下（350 ℃,2.5 MPa,WSHV=2.0 h^-1,H₂/oil ratio=1250 mL/mL）,脂肪酸甲酯的转化率和烷烃产品的收率分别达到98.4%和94.2%。     

Formal [4 + 1] cycloaddition strategy for the synthesis of dihydrobenzofurans via Michael addition of 2-(2-nitrovinyl)-phenols and malonate esters (C1 synthon) and subsequent iodine-catalyzed oxidative annulation

A novel [4 + 1] cycloaddition protocol for the synthesis of dihydrobenzo(naphtho)furan skeletons from readily available 2-(2-nitrovinyl)-phen(naphth)ols and malonate esters via a tandem Michael addition/iodine-catalyzed oxidative annulation has been developed. This method provides a new and facile application of malonate esters as 1,1-nucleophilic/electrophilic type C1 synthons without a pre-functionalization step and the plausible reaction mechanism is proposed.     

Chemical constituents and biological activities from branches of Colubrina asiatica

Sixteen compounds were isolated from a Thai medicinal plant, Colubrina asiatica. The isolated compounds were elucidated on the basis of spectroscopic methods (IR, 1D and 2D NMR) as six triterpene acids (1–6), five steroids (7–11), one benzoic acid derivative (12), two peptides (13 and 14), one sesquiterpenoid (15) and one jujubogenin (16). Compounds 3 and 10 showed antimalarial activity against Plasmodium falciparum. Compound 5 showed antimycobacterial activity. Moreover, compounds 3, 5, 6, 10 and 14 exhibited weak cytotoxicity against cancer cell lines. Compounds 1–15 have been isolated for the first time from this plant.     

Synthesis of lupeol derivatives and their antileishmanial and antitrypanosomal activities

The natural product lupeol 1 was isolated from aerial parts of Vernonia scorpioides with satisfactory yield, which made it viable to be used as starting material in semisynthetic approach. Ten lupeol derivatives 2–11 were prepared by classical procedures. Including, five new esters derivatives 7–11, which were obtained by structural modifications in the isopropylidene fragment. All semisynthetic compounds and lupeol 1–11 were confirmed by ¹H NMR, ¹³C NMR and HRMS. Their antiprotozoal activity was evaluated in vitro against L. amazonensis and T. cruzi. Derivative 6 showed the best antitrypanosomal activity (IC₅₀ = 12.48 μg/mL) and the lowest cytotoxic derivative (CC₅₀ = 161.50 μg/mL). The mechanism of action of the most active derivatives (4, 6 and 11) is not dependent from the enzyme trypanothione reductase.     

CsF–Si(OEt)4 catalyzed addition of (hetero)aromatic amides to ethyl acrylate

The conjugate addition of some (hetero)aromatic amides to an α,β‐unsaturated ester (ethyl acrylate) proceeds efficiently in the presence of an equimolar amount of the CsF–Si(OEt)₄ system to afford the corresponding ethyl esters of N‐substituted β‐amino acids. Copyright © 2001 John Wiley & Sons, Ltd.