Studies on the effects of coated Li2CO3 on lithium electrode

Although a lithium metal anode has a high energy density compared with a carbon insertion anode, the poor rechargeability prevents the practical use of anode materials. A lithium electrode coated with Li₂CO₃ was prepared as a negative electrode to enhance cycleability through the control of the solid electrolyte interface (SEI) layer formation in Li secondary batteries. The electrochemical characteristics of the SEI layer were examined using chronopotentiometry (CP) and impedance spectroscopy. The Li₂CO₃-SEI layer prevents electrolyte decomposition reaction and has low interface resistance. In addition, the lithium ion diffusion in the SEI layer of the uncoated and the Li₂CO₃-coated electrode was evaluated using chronoamperometry (CA).     

Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

微孔型固体偏氟乙烯-六氟丙烯共聚物电解质

将固体聚合物电解质 (Ｓｏｌｉｄｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅ)用于锂离子电池的研究已经有 3 0年的历史[1] ,从物理角度来看 ,研究过干态型 (ＤｒｙＳＰＥ)、凝胶型 (ＧｅｌｌｅｄＳＰＥ)和微孔型固体聚合物电解质 (ＰｏｒｏｕｓＳＰＥ)三大类型[2 ] ;从化学角度来看 ,研究过含氧、含氮、和含氟的等聚合物[1～ 6 ] .微孔型固体含氟聚合物电解质是近 1 0年来才开始研究并受到产业界很大关注的一种ＳＰＥ .固体聚合物电解质的应用可以解决液体电解质锂离子电池的漏液问题 ,并提高其安全性 ,还可以通过使用塑料包装来减小电池的重量…     

Effect of the Electrode Potential on the Oxygen Reaction Rate in the Electrode System O2, Au/La0.88Sr0.12Ga0.82Mg0.18O2.85

The polarization dependences of a porous gold electrode in contact with a solid electrolyte of the composition La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 are studied at 600–800°C and oxygen pressures of 2 × 10⁻²-1 atm. It is shown that the rate of cathodic reduction of oxygen out of the gas phase depends on the preliminary treatment of the sample. The activation energy is equal to 110–135 kJ mol⁻¹ at a low polarization. After increasing the polarization, the activation energy for the cathodic reduction of oxygen equals 75–85 kJ mol⁻¹ and depends on the oxygen pressure as a power function with a power index of 1/4. The rate of the anodic evolution of oxygen is dependent neither on the preliminary treatment of the sample nor on the oxygen pressure in the gas phase and the polarization curve has a characteristic segment, which corresponds to a limiting overvoltage.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 954–962.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Beresnev.     

Seawater—A test of multicomponent electrolyte solution theories. II. Enthalpy of mixing and dilution of the major sea salts

In a continuing effort to predict the physicochemical properties of seawater from the properties of single aqueous electrolyte solutions, the pairwise heats of mixing at constant molal ionic strength,I=1.0 ional, have been determined for the six possible pairs of salts from the set (NaCl, Na₂SO₄, MgCl₂, MgSO₄) at 30°C. In addition, heats of dilution for two aqueous solutions formed from these salts and havingI=1.0 ional have been determined at 30°C. In order to present the most thermodynamically consistent results, it was found necessary to apply a correction term to the relative apparent equivalent enthalpies given in the literature at 30°C. These correction terms derived from a consideration of published results on heats of dilution at very low concentrations. Further, in order to make predictions for seawater at 25°C, it was deemed desirable to refit existing heat-capacity data. The heats relative apparent equivalent enthalpies for the two mixtures mentioned as well as for seawater. The estimates are based on the theoretical equation of Reilly and Wood for charge-asymmetric mixtures which derives from the work of Friedman. In the most applicable cases, the estimates agree with experimental relative apparent equivalent enthalpies to within 5%. In general, the results substantiate the theoretical equation.Taken in part from the Ph.D. dissertation of W. H. Leung, University of Miami, Miami, Florida 33149.     

Surface film formation on a graphite electrode in Li‐ion batteries: AFM and XPS study

The formation of a passivation film (solid electrolyte interphase, SEI) at the surface of the negative electrode of full LiCoO₂/graphite lithium‐ion cells using LiPF₆ (1M ) in carbonate solvents as electrolyte was investigated by means of x‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The analyses were carried out at different potentials of the first and the fifth cycles, showing the potential‐dependent character of the surface‐film species formation. These species were mainly identified as Li₂CO₃ up to 3.8 V and LiF up to 4.2 V. This study shows the formation of the SEI during charging and its partial dissolution during discharge. Copyright © 2005 John Wiley & Sons, Ltd.     

Anionic high-temperature conduction in single crystals of nonstoichiometric phases R1 ? y M y F3 ? y (R = La-Lu, M = Ca, Sr, Ba) with the tysonite (LaF3) structure

Electrophysical properties of single crystals of nonstoichiometric phases R_{1 − y} M _y F_{3 − y} , where R = La-Lu, M = Ca, Sr, or Ba, with the tysonite (LaF₃) structure, which are present in a metastable state after being grown and cooled, are measured in the temperature interval extending from 300 to 1073 K. It is discovered that, during a sufficiently long high-temperature investigation, solid solutions R_{1 − y} Ca _y F_{3 − y} , where R = Tb, Dy, or Ho, undergo irreversible variations in the phase composition in the temperature region 723 to 823 K. This level of temperatures, which correspond to partial decomposition of phases R_{1 − y} Ca _y F_{3 − y} with the rare-earth elements of the end of the period, lies above the temperatures to which the fluoride solid electrolytes are usually heated when used in solid-state electrochemical devices. The temperature and concentration dependences of the phases’ electroconduction are explained in the framework of the vacancy mechanism of anionic transport. Original Russian Text ? N.I. Sorokin, B.P. Sobolev, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 4, pp. 420–431. The paper is dedicated to the memory of Prof. M.W. Breiter, formerly of the Vienna Technical University, Austria.     

Dual-Phase structure of polymer electrolytes comprised of NBR/SBR latex films swollen with lithium salt solution

Dual-phase polymer electrolytes (DPE) that have high ionic conductivity (> 10^?3 S/cm) and good mechanical strength were prepared by mixing NBR and SBR latices and casting films. The latex films absorbed large quantities of lithium salt solution (e.g., 1M lithium perchlorate in γ-butyrolactone) to obtain DPE films but did not dissolve with swelling. The NBR phase is polar and was impregnated selectively with the polar lithium salt solution, whereas the SBR phase is nonpolar and formed a mechanically-supportive matrix. Transmission electron microscopic (TEM), electron energy loss spectral (EELS), and energy-dispersive x-ray (EDX) analyses showed microscopically the dual-phase structure. Evidence for swelling by lithium salt solution was found only in the NBR phase and not in the SBR phase by EDX microanalysis. Ionic conductivity as a function of NBR content or swelling degree showed clearly that a percolation threshold for ionic conductivity exists. © 1994 John Wiley & Sons, Inc.     

A new method for the determination of mobile phase volume in normal and reversed-phase liquid chromatography

Summary A new method for the determination of the mobile phase volume (V _m) in liquid chromatography is presented based on the model regarding the retention of ionic solutes in the presence of eluent electrolytes. TheV _m value can be determined by measuring the retention volumes of two ions that have the same charge in two eluent electrolyte systems. Compared with the methods using isotopically labelled eluent components or inorganic salts asV _m markers, the method presented is proved to give more reasonableV _m values for both normal and reversed-phase liquid chromatography. As well as in binary mixed solvent systems, theV _m values in single solvent systems can be determined by this method.     

La0.8Sr0.2Ga0.8Mg0.2O2.8的电化学性质及其在SOFC中的应用

采用凝胶浇注法制备具有较高氧离子电导率的固体电解质La0.8Sr0.2Ga0.8Mg0.2O2.8粉料.X射线衍射结果表明,于1400℃焙烧后即形成了钙钛矿结构,无杂相存在.探讨了粉料压制坯体的致密化和导电性能在1450℃下与烧结时间的关系,发现烧结时间为18h时其相对密度达98.3%,而在24h的情况下,样品具有最佳的氧离子导电性.采用Ni-Ce0.8Gd0.2O1.9作为阳极,La0.8Sr0.2Ga0.6Ni0.4O2.7作为阴极,组装了平板型固体氧化物燃料电池(SOFC).阳极和阴极分别通入含3%H2O的氢气和空气,750℃时的开路电压为1.04V,最大输出功率密度(P)达252mW/cm2(U=0.48V,J=525mA/cm2).