LC–MS Determination and Pharmacokinetic Study of a Novel Sulfonylurea: Potential Hypoglycemic Agent in Rat Plasma

To support preclinical pharmacokinetic investigation of 1-[4-[2-(4-bromobenzene-sulfonaminoethyl)phenylsufonyl]-3-(trans-4-methylcyclohexyl)urea (G004), a rapid, sensitive and specific high-performance liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) method was developed and validated. Glibenclamide was employed as internal standard. After liquid–liquid extraction the analyte was analyzed on a Kromasil C₁₈ column (150 × 2.0 mm i.d.) with a mobile phase consisted of acetonitrile–water (0.05% acetic acid), 30:70 (v/v). The flow rate was 0.2 mL min⁻¹. Detection was performed on a quadrupole mass spectrometer using an electrospray ionization interface and the selected-ion monitoring (SIM) mode. The retention time was about 3.5 and 4.2 min for Glibenclamide and G004, respectively. The assay was linear over the concentration range of 2.0–500.0 ng mL⁻¹. Extraction Recovery of G004 in rat plasma was more than 87%. The intra- and inter-assay precision was lower than 11.5% (CV). This validated method was successfully applied to the pharmacokinetics of G004 in rats.     

Salt promoted adsorption chromatography of malted barley amylases

Summary A sequence for the fractionation of the amylasic components from a malted barley extract is proposed using two salt-promoted, adsorption processes: thiophilic interaction chromatography (TIC) and hydrophobic interaction chromatography (HIC).Two fractions containing -amylase activity were recovered during the thiophilic chromatography; the first was resolved in to -amylase I and -amylase I by HIC on a phenyl-sepharose column; an enrichment factor of 32 was achieved for -amylase I. The other amylasic component eluted from the thiophilic gel was characterized as -amylase II. Although the adsorption of malt amylases on phenylsepharose and the thiophilic adsorbent is salt promoted, the interactions involved in each case are clearly distinguished by the different behaviour and disparate salt effects.     

HPLC determination of pyroglutamic acid as a degradation product in parenteral amino acid formulations

Summary The aminoacid glutamine in aqueous solution and in conditions of high temperature and long term storage is partly transformed into pyroglutamic acid which exhibits potential neurotoxic effects.Commercially available aminoacid mixtures supplemented with glutamine are heat-sterilized and some losses of glutamine and formation of pyroglutamic acid may occur.The aim of the work was to set up an easy and reliable HPLC method which allows the determination of pyroglutamic acid as a degradation product of glutamine. The column was a 5 m Hypersil ODS (100×4.6 mm) and the mobile phase 100% 0.007 M phosphate buffer pH 3.5.Stability studies in different conditions of temperature and time of storage were performed on aminoacid mixture available in the commerce.     

Preparative Separation and Analysis of Complex Mixtures of Leucomycins and Desmycarosyl Leucomycins Using HPLC and Mass Spectrometry

Composition and hydrolysis products of a biotechnical available complex of macrolides were analyzed by HPLC and ESI-CID-MSⁿ. Major components are leucomycin-type antibiotics (leucomycins A₁ (5), A₇ (3), A₉ (2), 9-desoxy-9-oxo-turimycin H₃ (4) and niddamycin B (6). Hydrolysis of the complex mixture yielded 9-, 13-isoforocidins (7, 8, 9, 11) and 9-oxo-forocidin (10). A preparative separation procedure was elaborated furnishing compounds 3 - 11 for semisynthetic experiments.Prof. Dr. Udo Gräfe deceased on 14.2.2003. For obituarity see: Schlegel B (2003) J Peptide Sci 9: 661–661.     

Computer interactive identification system for polycyclic aromatic hydrocarbons in reversed-phase microcolumn liquid chromatography

Summary A computer interactive identification system is proposed which is based on the relationship between retention and molecular properties such as the size and shape of polycyclic aromatic hydrocarbons (PAHs). This system offers an automatic analytical process for liquid chromatography, providing a reliable identification of the separated components. The identification can be further enhanced by the use of multiple detectors such as a multichannel UV detector. The system can be used for optimization procedures, resulting in a highly automatic complex analytical system.     

Chiral separation of N-(trans-4-isopropylcyclohexylcarbonyl)-D,L-phenylalanine isomers by high performance liquid chromatography

Summary A high-performance liquid chromatographic method was developed for the chiral separation of a new anti-diabetic agent, N-(trans-4-isopropylcyclohexylcarbonyl)-D-phenylalanine, and its L-enantiomer. The separation was performed on a Sumichiral OA-3300 column. Optimized mobile phase was 0.025 mol.L⁻¹ ammonium acetate in methanol solution. UV detection was at 210 nm. Baseline chiral separation was obtained within 12 minutes. The detection limits are 80 pg for the D-enantiomer and 120 pg for the L-enantiomer. RSD of the method was below 1% (n=5).     

The identification of nitrated polycyclic aromatic hydrocarbons in diesel particulate extracts and their potential formation as artifacts during particulate collection

Summary The highly complex matrix of diesel particulate extracts was analyzed for nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using fused-silica capillary-column gas chromatography along with a thermionic nitrogen-phosphorus detector (TID) and high-performance liquid chromatography followed by on-line catalytic reduction of the nitro-PAH to amino-PAH and subsequent fluorescence detection. Positive isomer identification and quantitation of nitro-PAH are from retention times of authentic standards and their mass spectra. The ease of nitro-PAH formation by nitration of PAH raises the question regarding the origin of these species, whether they are produced as “native” products during the engine combustion process and/or in the exhaust, or instead, formed as the result of chemical conversion to produce artifacts during the sampling procedure. This problem is assessed examing 1-nitropyrene-concentration in particulates of three light-duty diesel engines for different sampling times. 1-Nitropyrene concentrations show only a moderate increase with sampling time under average sampling conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Efficient combination of task-specific ionic liquid and microwave dielectric heating applied to one-pot three component synthesis of a small library of 4-thiazolidinones

The first report of the use of task-specific ionic liquid as synthetic equivalent of ionic liquid-phase matrice for the preparation of a small library of 4-thiazolidinones is reported in this paper. The starting (ethyleneglycol)ionic liquid-phase is functionalized in good yields with 4-(formylphenoxy)butyric acid by using usual esterification reaction conditions (DCC/DMAP as catalyst). The synthesis of the ionic liquid-phase bound 4-thiazolidinones was performed by a one-pot three-component condensation under microwave dielectric heating. The final cleavage under microwave/catalysis strategy provides the expected 4-thiazolidinones in high purity after flash-chromatography purification. According to the ionic liquid-phase organic synthesis (IoLiPOS) methodology, it was found that optimized reaction conditions were performed by standard analytical methods (NMR, TLC). The ¹H, ¹³C NMR spectrum of some representative 4-thiazolidinones and ionic liquid-phase bound benzaldehyde are also reported.     

An application of factorial design to the development of fused silica capillary columns

Stationary phase crosslinking conditions for fused silica capillary columns were optimized with the use of a factorial design experiment. This experimental strategy was chosen because it provided for the determination of two-factor interactions. A predictive model was developed for the desired chromatographic performance parameters as a function of the variables of the crosslinking reaction. Confirmatory experiments proved the usefulness of the mathematical model which resulted in the production of capillary columns of superior performance with significant improvements in reproducibility.