金属-有机骨架MIL-101(Cr)掺杂聚合物整体柱的制备及其用于酚类化合物的在线固相萃取

制备了金属-有机骨架（MOF）MIL-101（Cr）掺杂聚合物整体柱，建立了在线固相萃取-高效液相色谱检测水中4-硝基苯酚、2-硝基苯酚、3-甲基苯酚和2，4-二氯苯酚的方法。考察了样品溶液pH值、上样时间、上样流速和解吸时间对酚类化合物萃取效果的影响。在最优萃取条件下，采用制备的整体柱检测水中酚类化合物，其富集因子高，线性范围宽，精密度好，检出限低，适用于水中酚类化合物的检测。制备掺杂聚合物整体柱是促进和拓宽MOFs在线固相萃取应用的有效方法之一。     

Preparation of a monolithic column with a mixed‐mode stationary phase of reversed‐phase/hydrophilic interaction for capillary liquid chromatography

A monolithic capillary column with a mixed‐mode stationary phase of reversed‐phase/hydrophilic interaction chromatography was prepared for capillary liquid chromatography. The monolith was created by an in‐situ copolymerization of a homemade monomer N,N‐dimethyl‐N‐acryloxyundecyl‐N‐(3‐sulfopropyl) ammonium betaine and a crosslinker pentaerythritol triacrylate in a binary porogen agent consisting of methanol and isopropanol. The functional monomer was designed to have a highly polar zwitterionic sulfobetaine terminal group and a hydrophobic long alkyl chain moiety. The composition of the polymerization solution was systematically optimized to permit the best column performance. The columns were evaluated by using acidic, basic, polar neutral analytes, as well as a set of alkylbenzenes and Triton X100. Very good separations were obtained on the column with the mixed‐mode stationary phase. It was demonstrated that the mixed‐mode stationary phase displayed typic dual retention mechanisms of reversed‐phase/hydrophilic interaction liquid chromatography depending on the content of acetonitrile in the mobile phase. The method for column preparation is reproducible.     

固定化胰蛋白酶整体小柱的制备及其用于微量蛋白质的快速酶解

发展了一种光引发聚合法制备固定化胰蛋白酶整体小柱的方法,以用于微量蛋白质的快速酶解。整体小柱由功能单体4-戊烯酸琥珀酰亚胺酯、甲基丙烯酸羟乙酯,交联剂季戊四醇三丙烯酸酯和三元致孔剂二甲基亚砜、N,N-二甲基甲酰胺、十二醇在20 μL的移液器吸头尖端原位聚合而成。形成整体柱后,胰蛋白酶分子通过氨基与琥珀酰亚胺酯反应实现固定化。系统研究了聚合溶液中活性酯含量与柱床体积对胰蛋白酶固载量的影响,评价了固定化酶整体小柱对标准蛋白细胞色素C和牛血清白蛋白的酶解效率,以及整体小柱的稳定性和重复性。结果表明,在离心辅助下,酶解过程可在10 min内完成,批次间具有良好的重复性。最后将固定化酶整体小柱应用于1×10⁵个人急性早幼粒白血病（NB4）细胞与人急性T细胞白血病（Jurkat T）细胞的快速酶解,经纳升级液相色谱与高分辨质谱联用分析后鉴定得到2489个和2572个蛋白质。相比于溶液状态下的酶解,分别提高了2.2%和6.1%的蛋白鉴定数量,展现了其在蛋白组学研究中的应用潜力。     

Dynamic Capacity Studies of CIM (Convective Interaction Media)® Monolithic Columns

The characterization of CIM^® DEAE monolithic columns in terms of dynamic binding capacity is presented in this paper. Breakthrough experiments were performed for capacity determination. Bovine serum albumin (BSA) was used as a model protein. It is shown that CIM^® monolithic columns have good batch‐to‐batch reproducibility as well as long‐term stability. The experiments performed under different linear velocities demonstrated that the dynamic capacity is unaffected at least up to a linear velocity of 2450 cm/h. Furthermore, the breakthrough curve slope is constant, indicating that the capacity would remain constant at even higher linear velocities. The adsorption isotherm of BSA dissolved in 20 mM Tris‐HCl buffer shows a constant capacity of around 30 mg/mL of support down to a concentration of 20 μg/mL. The capacity is substantially influenced by the ionic strength; however, 20% of the maximal capacity is still preserved at 0.3 M NaCl.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

酰胺修饰杂化硅胶整体柱的制备及其在莱克多巴胺检测中的应用

以氧化琼脂糖（AG）和四甲氧基硅烷（TMOS）为前驱体,通过溶胶－凝胶法制备 AG/SiO2整体柱,利 用酰胺化反应对整体柱进行酰胺基团修饰。通过X射线光电子能谱（XPS）、傅里叶变换红外光谱（FTIR）、N2 吸附－脱附和扫描电镜（SEM）等表征手段对所制备材料的结构和形貌进行分析。结果显示酰胺基团被成功修 饰至整体柱,该材料具有良好的通透性及较大的比表面积。以其为固相微萃取介质对羊肉中的莱克多巴胺进 行萃取富集,在优化的样品前处理条件下,采用基质添加标准曲线法,结合高效液相色谱－紫外（HPLC－ UV）检测,建立了羊肉中痕量莱克多巴胺的分析方法。该方法在 1. 94～1 170 ng/g范围内线性良好,相关系 数（r 2 ）为 0. 993 1,检出限（LOD）和定量下限（LOQ）分别为0. 618、1. 94 ng/g,3个不同加标水平下样品的平均回 收率为86. 6%～103%,相对标准偏差（RSD,n = 5）为4. 8%～7. 3%。该方法具有检出限低、回收率高、样品用 量少等特点,可用于羊肉中痕量莱克多巴胺的灵敏检测。     

整体柱在线固相微萃取-高效液相色谱法分析爽肤水中痕量雌激素

以甲基丙烯酸缩水甘油酯(GMA)为功能单体、乙二醇二甲基丙烯酸酯(EDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂、甲醇及正己烷(14∶5,v/v)为二元致孔剂,通过原位聚合反应制备了聚甲基丙烯酸缩水甘油酯(Poly(GMA-co-EDMA))毛细管整体柱。研究表明,制备的Poly(GMA-co-EDMA)整体柱具有良好的通透性和较低的柱压(1.5×106Pa,冲洗流速0.5 mL/min)。该整体柱对雌二醇、炔雌醇、雌酮和己烯雌酚的富集倍数分别为86、116、77和86。构建了整体柱在线微萃取接口装置,建立了整体柱在线固相微萃取-高效液相色谱(HPLC)测定爽肤水中痕量雌二醇、炔雌醇、雌酮和己烯雌酚的分析方法。该分析方法的检出限(S/N=3)为0.05~0.20μg/L。将方法应用于爽肤水中雌激素的检测,加标回收率为69.3%~111.3%,RSD5.0%。所建立的方法简单、快速、灵敏、准确,可满足爽肤水中痕量雌激素的分析。     

Silica‐supported polymeric monolithic column with a mixed mode of hydrophilic and strong cation‐exchange interactions for microcolumn liquid chromatography

A novel sulfonic acid group containing hydrophilic strong cation‐exchange monolith was prepared by in situ coating 5 μm bare silica particles with the copolymers of glycidyl methacrylate and pentaerythritol triacrylate and further sulfonating the prepared polymer matrix with Na₂SO₃ inside a 150 μm id capillary. The preparation conditions were investigated, and the method was described in detail. The prepared column was characterized by comparing with its counterparts reported previously in terms of matrix morphology, preparation reproducibility, permeability, swelling–shrinking behavior, mechanical stability, hydrophilicity, binding capacity, and column efficiency. The swelling–shrinking behavior of the present column in solvents of different polarities was negligible, the hydrophobicity could be suppressed at the acetonitrile concentrations higher than 40% v/v, and the binding capacities were 256 μequiv/mL and 20.1 mg/mL for Cu²⁺ and lysozyme, respectively. The minimum theoretical plate heights were 8, 10, and 13 μm, and the values of the C term in van Deemter equation were 9, 12, and 35 ms for the test analytes of Na⁺, thiourea, and cytidine 5ʹ‐monophosphate, respectively. This column exhibited an excellent performance in the separations of monovalent inorganic cations, uncharged polar, and charged polar compounds.     

Facile preparation of a polydopamine‐based monolith for multiple monolithic fiber solid‐phase microextraction of triazine herbicides in environmental water samples

A new multiple monolithic fiber solid‐phase microextraction using a polydopamine‐based monolith as the extraction medium is proposed. The monolith was synthesized by facile in situ copolymerization of N‐methacryldopamine and dual cross‐linkers (divinylbenzene/ethylenedimethacrylate) in the presence of N ,N‐dimethylformamide. The effect of the contents of N‐methacryldopamine and porogen in the polymerization mixture on the extraction performance was investigated thoroughly. A series of characterization studies was performed to validate the structure and properties of the monolith. The prepared multiple monolithic fibers were used for the extraction of triazine herbicides in environmental water samples. After the optimization of the extraction parameters, a convenient, sensitive, cost‐effective, and environmentally friendly method for the determination of trace triazine herbicides in water samples was developed by coupling multiple monolithic fibers solid‐phase microextraction with high‐performance liquid chromatography and diode array detection. The results indicated that the limits of detection and quantification for the target compounds were 0.031–0.14 and 0.10–0.45 μg/L, respectively. Good precision and reproducibility were obtained with the relative standard deviations below 10%. The developed method was applied to the analysis of the triazine herbicides in different water samples (lake, river, and farmland waters). The recoveries of the method were in the range between 79.6 and 117%.