MoS2纳米管包覆单壁碳纳米管束的制备

MoS₂ nanotube coated SWNT (Single wall carbon nanotube) bundles have been successfully prepared by adsorbing (NH₄)₂MoS₄ onto SWNT bundles and subsequent heat treatment under H₂ at 900 ℃ in a tube furnace. The morphologies, structure and composition of the as-prepared sample were investigated by XRD, SEM, HRTEM coupled with EDS. The formation mechanism has also been preliminarily discussed.     

Oxygen atom transfer in models for molybdenum enzymes: isolation and structural, spectroscopic, and computational studies of intermediates in oxygen atom transfer from molybdenum(VI) to phosphorus(III)

Intermediates in the oxygen atom transfer from Mo(VI) to P(III), [Tp(iPr)MoOX(OPR3)] (Tp(iPr) = hydrotris(3-isopropylpyrazol-1-yl)borate; X = Cl-, phenolates, thiolates), have been isolated from the reactions of [Tp(iPr)MoO2X] with phosphines (PEt3, PMePh2, PPh3). The green, diamagnetic oxomolybdenum(IV) complexes possess local C(1) symmetry (by NMR spectroscopy) and exhibit IR bands assigned to nu(Mo==O) (approximately 950 cm(-1)) and nu(P==O) (1140-1083 cm(-1)) vibrations. The X-ray crystal structures of [Tp(iPr)MoOX(OPEt3)] (X = OC6H4-2-sBu, SnBu), [Tp(iPr)MoO(OPh)(OPMePh2)], and [Tp(iPr)MoOCl(OPPh3)] have been determined. The monomeric complexes exhibit distorted octahedral geometries, with coordination spheres composed of tridentate fac-Tp(iPr) and mutually cis monodentate terminal oxo, phosphoryl (phosphine oxide), and monoanionic X ligands. The electronic structures and stabilities of the complexes have been probed by computational methods, with the three-dimensional energy surfaces confirming the existence of a low-energy steric pocket that restricts the conformational freedom of the phosphoryl ligand and inhibits complete oxygen atom transfer. The reactivity of the complexes is also briefly described.     

Oxidation of Methanol on Pt,Pt–Ru,and Pt–Ru–Mo Electrocatalysts Dispersed in Polyaniline: An in situ Infrared Reflectance Spectroscopy Study

The electrochemical oxidation of methanol was investigated on a Pt–Ru–Mo catalyst with an in situ infrared reflectance spectroscopy. The electrocatalysts were prepared by an electrochemical deposition and dispersed in a conducting three-dimensional matrix of polyaniline (PAni). We observed that CO₂ is produced from methanol oxidation at 350 mV vs. RHE on PAni/Pt–Ru–Mo, which is 100 mV less negative than on PAni/Pt–Ru and 200 mV less than on PAni/Pt. The results suggest that Pt–Ru–Mo is less sensitive to CO_ADS poisoning than Pt–Ru and much more sensitive than Pt. Large differences are observed concerning the average wavenumber of _ADS between Pt–Ru–Mo, Pt–Ru, and Pt.     

Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.     

Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S

The reaction of MoO3 and S at temperatures higher than 300 degrees C in an argon atmosphere provides a convenient and effective method for the synthesis of MoS2 nanocrystalline substances. MoS2 nanotubes and fullerene-like nanoparticles have been obtained by the reaction at 850 degrees C under well-controlled conditions. The influences of reaction temperature and duration were carefully investigated in this paper. All of the nanostructures were characterized by Xray powder diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). A stepwise reaction model and rolling mechanism were proposed based on the experimental results.     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 58. Zur Kenntnis von 2-(Dimethylaminomethyl)ferrocenyl-Verbindungen des Vanadiums,Molybdäns,Wolframs, Thoriums und Urans

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 58 On 2-(Dimethylaminomethyl)ferrocenyl Compounds of Vanadium, Molybdenum, Tungsten, Thorium, and Uranium Earlier results according to which dimethylaminomethylferrocenyl groups (FcN) are able to form stable organometallic chelate compounds were confirmed by synthesis of the heterobimetallic chelate compounds (FcN)₂VO · Li(acac) II , (FcN)MoO₂(acac) III , (FcN)WOCl₃ IV , (FcN)Th(acac)₃ V , and (FcN)UO₂(acac) VI from the corresponding metal acetylacetonates or oxidchlorides and (FcN)Li I . The new compounds were characterized by elemental analysis, the i.r., ¹H-n.m.r., and electron spectra and by their effective magnetic moments.     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.