Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization

A novel acrylamide (AA) molecularly imprinted polymer was synthesized by atom transfer radical polymerization (ATRP) on graphite oxide (GO) particles. Propionamide (PAM) was used as a dummy template molecule, hydroxy ethyl acrylate (HEA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, and acetonitrile as both solvent and dispersion medium. Scanning electron microscopy (SEM) images and infrared spectroscopy (IR) confirmed that the molecularly imprinted polymers (MIP) were successfully grafted onto the surface of the GO particles. The corresponding adsorption kinetic curves and adsorption isotherms showed that the AA adsorption reached equilibrium after 5 h, with large amounts of AA being adsorped in the first 100 min. The maximum AA adsorption capacity was 123.48 µmol g^?1 according to Scatchard analysis, which indicated that the MIP possesses good AA adsorption capacity. This MIP-GO material was used to selectively determine AA in fried food samples.     

全谱拟合法研究聚丙烯腈基碳纤维形成过程中晶态结构演变

通过全谱拟合法对碳纤维制备过程中不同阶段纤维的XRD谱图进行处理,得到不同阶段纤维的微观结构参数,研究了聚丙烯腈(PAN)基碳纤维制备过程中晶态结构的演变.全谱拟合法基于晶体衍射的严格物理理论,拟合目标为整个衍射谱,并不是个别衍射峰,所得结果具有更高的可信度.研究结果表明:PAN原丝中的高分子链沿纤维轴高度取向,表观晶粒尺寸为6.5 nm左右;经过预氧化处理,纤维中的有序结构遭到破坏,表观晶粒尺寸锐减.纤维中逐渐形成梯形结构并沿纤维轴取向,从而形成新的有序结构;经过碳化处理后,环状梯形结构转变为碳的层状结 关键词： 碳纤维 晶体结构 XRD 全谱拟合法     

萘磺酸掺杂对纳米管结构聚苯胺低温电阻率的影响

通过研究用自组装法制备的萘磺酸掺杂的纳米管结构聚苯胺(苯胺与萘磺酸的摩尔比分别为1∶025,1∶05,1∶1,1∶2,1∶3)的电阻率温度依赖关系(测量温区为80—300K),仔细分析聚苯胺的结构形貌特征,提出了变程跳跃隧道穿透混合模型:认为在萘磺酸掺杂的纳米管结构聚苯胺样品中,跳跃和隧穿两种机制同时起作用,载流子沿纳米管传导是变程跳跃过程起主要作用,而载流子在纳米管之间的传导是隧穿过程起主要作用.实验结果表明,不同浓度的萘磺酸掺杂对样品的低温电阻率的影响很大,随着掺杂浓度增加,载流子传导所需克服的能垒C0迅速减小,当掺杂接近饱和时,C0不再减小.实验中还研究了不同形貌对电阻率的影响,结果表明样品中纳米管所占比例的增大有利于载流子传导 关键词： 聚苯胺 纳米管 低温电阻率     

缺陷对碳纳米管摩擦与运动行为的影响

本文采用分子动力学方法研究了公度、无公度情况下含空位、Stone-Thrower-Wales(STW)型缺陷的单壁碳纳米管(SWCNT)在石墨基底上的摩擦与运动行为.结果表明,公度时缺陷的存在导致了界面局部无公度,减小了摩擦.随着碳纳米管底部STW缺陷的增多,碳纳米管变形增大,侧向力波动的幅值减小,局部无公度性增强,摩擦减小.含空位缺陷的碳纳米管所受的摩擦力明显大于含STW缺陷的碳纳米管,原因在于含空位缺陷的碳纳米管在运动的后期出现了明显的翻转现象,增大了能量耗散.无公度时,碳纳米管与石墨基底间的摩擦力很小,缺陷对其摩擦力影响不大,原因在于无论是否含有缺陷,碳纳米管与石墨组成的界面的无公度性差别不大.     

基于微极性弹性力学的碳纳米管中波的传播特性

基于微极性弹性理论推导出的碳纳米管的应力-应变关系，使用哈密顿原理建立了碳纳米管的动力学微分方程. 通过求动力学微分方程的波动解，获得碳纳米管中波的频率与波数的关系即弥散关系，另外还得到了波的群速度和特征波面. 对所得结果进行了讨论. 关键词： 微极性弹性力学 碳纳米管 群速度 特征波面     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Electrochemical sensors of heavy metals using novel polymer-modified glassy carbon electrodes

Electroanalytical determination of heavy metals using stripping voltammetry is commonly employed and has many advantages over other methods. The sensitivity of the technique is greatly improved by employing different modified electrodes. Seven novel polymer-modified glassy carbon electrodes have been developed in this investigation for the trace analysis of heavy metals such as zinc, cadmium, lead, arsenic, and copper in formulated samples of waters by square wave stripping voltammetry. Very good responses have been observed for all the metals, while all the modified electrodes employed. The poly(3,4-ethylenedioxythiophene)-modified electrode has resulted in very low limit of detection (LOD) value. Comparison is made between literature results of LOD and the results obtained in this study. An independent atomic absorption spectroscopic analysis of the industrial wastewater sample was carried out and the results compared. The suitability of the method for practical application was ascertained by applying the procedure for the wastewater from a plating industry.     

Bioglycerol-Based Sulfonic Acid-Functionalized Carbon Catalyst as an Efficient and Reusable Catalyst for One-Pot Synthesis of 3- Substituted-2H-1,4-Benzothiazines

Abstract

A simple and efficient synthetic protocol has been developed for the synthesis of 3-substituted-2H-1,4-benzothiazines by using bioglycerol-based sulfonic acid-functionalized carbon catalyst, devoid of corrosive acidic and basic reagents. The developed method has the advantages of good to excellent yields, short reaction times, operational simplicity, and a recyclable catalyst.     

Rationally Designing Molecularly Imprinted Polymer Toward a High Specific Adsorbent by Using Metal as Assembled Pivot

This article presents an original work aimed at rationally designing molecularly imprinted polymer (MIP) toward a high specific adsorbent. Assembling with cobalt as the pivot, the MIP was prepared by coordinating polymerizable monomers around an inducible template. The use of pivot obviously plays a positive role on increasing the specificity of MIP, so as to adsorb more for the template and less for its analogue. Related studies indicate that these may be a result of increasing specific interaction, which makes the MIP capable of recognizing the imprint species. Further information from thermodynamic analysis reveals that the increasing specific interaction, in logic, can be due to a higher fidelity of imprint, which specifically allures the template to bind.