Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

表面改性对CeO2纳米粉体特性的影响

研究了表面改性对CeO2纳米粉体特性的影响，采用表面活性剂．十二烷基硫酸钠对CeO2粉末颗粒表面进行了改性。未改性和改性的纳米氧化铈用粉体综合性能测试仪、激光粒度仪、比表面积测试仪、X射线仪、扫描电子显微镜进行了表征。结果表明，用十二烷基硫酸钠表面改性能提高纳米氧化铈的流动性和分散性，减小比表面积和团聚，同时也对CeO2粉体颗粒表面改性的机制进行了探讨。     

Synthesis and Crystal Structure of Cadmium（Ⅱ） Complex [Cd（H2O）（CH3OC6H4COO）2]n

1 INTRODUCTION Cadmium (Ⅱ) complexes have been exten- sively studied from both chemical and structural views, mainly due to the capability of cadmium (Ⅱ) (shared by most d10 metal ions) to adopt different modes of coordination determined by the consideration of size, as well as electrostatic and covalent bonding forces[1]. And the field of coordination polymers has witnessed tremendous growth over the last decade[2]. Many coordination polymeric networks have been shown to posses intere…     

聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

Biodegradable and pH-sensitive hydrogels: Synthesis by crosslinking of N,N-dimethylacrylamide copolymer precursors

Novel pH-sensitive hydrogels containing azoaromatic crosslinks were synthesized by the crosslinking of polymeric precursors. First, a reactive polymeric precursor was synthesized by copolymerization of N,N-dimethylacrylamide, N-tert-butylacrylamide, acrylic acid, and N-methacryloylglycylglycine p-nitrophenyl ester. The hydrogel was prepared in the second step by the reaction of the polymeric precursor with N,N′-(ω-aminocaproyl)-4,4′-diaminoazobenzene. The hydrogels were characterized by the network structure, (that is, content of crosslinks, unreacted pendent groups, and cycles), the equilibrium swelling ratio as a function of pH, modulus of elasticity in compression, and the degradability in vitro. The results obtained indicated that the hydrogel network structure strongly depends on the reaction conditions such as polymer concentration, and the ratio of the reactive groups during the crosslinking reaction. The swelling and mechanical properties of hydrogels can be controlled by the modification of polymer backbone structure and/or the crosslinking density. The rates of hydrogel degradation depended on their degree of swelling. The higher the degree of swelling, the higher the degradability. The properties of the hydrogels suggest that they have a potential as carriers for colon-specific drug delivery. © 1994 John Wiley & Sons, Inc.     

Flow‐Injection Amperometric Detection with Solvent Polymeric Membrane Ion Sensors

An amperometric detector for hydrophobic ions based on a plasticized poly(vinyl) chloride (PVC) membrane incorporated in a flow‐injection system was developed. A four‐electrode potentiostat with ohmic drop compensation was used, while a flow‐through cell incorporated the four electrodes and the membrane, which contained tetrabutylammonium tetraphenylborate. When the influence of the applied potential and of the flow‐injection variables on the determination of tetrabutylammonium was studied, a linear relationship was observed between current peak height and ion concentration over a range of 5×10^?6–6×10^?5 M tetrabutylammonium. Good repeatability and between‐day reproducibility and high sample frequency were obtained. The effect of other ions was studied. Two different amperometric methods, indirect and direct, were also developed for the determination of dodecylsulfate in the concentration range 3×10^?5–9×10^?4 M.     

A DSC-Study of Donor/Acceptor Side-Chain Polymers with Flourinated Taper-Shaped Tails

It is shown that insertion in methacrylic polymers of bulky electron donor/acceptor side-groups with taper-shaped flourinated tails promotes a self-organization of the respective side-chain polymers due to the space demands of the bulky D/A side-groups, leading to a columnar hexagonal mesophase. The presence of an Lc-phase is evidenced by DSC and identified by X-ray analysis. The orientation in the respective copolymers and polymer blends is additionally improved by the CT-interaction between the D/A side-groups. An increased packing effect due to this CT-orientation effect is evidenced in DSC by an increase of the respective transition temperatures. CT-interaction is responsible as well for a preferential polymerization of monomeric D/A-complexes leading to copolymers of alternating structures and for a zip-like arrangement along the main chain of the A/D-complexes between the interacting side-groups in polymer blends. Formation of mesophases is even observed in CT-interacting blends between the Lc-D/A side-chain polymethacrylates and the respective amorphous D/A side-chain polysiloxanes.This revised version was published online in November 2005 with corrections to the Cover Date.     

三甲氧基苄啶分子印迹整体柱的制备及色谱性能

选择甲基丙烯酸为功能单体\, 甲基丙烯酸乙二醇双酯为交联剂, 制备了三甲氧基苄啶分子印迹整体柱, 对整体柱材料的形貌进行了表征, 并且研究了TMP和5种磺胺类药物在分子印迹整体柱上的色谱行为.     

Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.     

分子印迹技术制备石油有机硫组分固相萃取剂的研究

用分子印迹技术合成了对石油有机硫组分二苯并噻吩(Dibenzothiophene，DBT)具有高效选择性的分子模板聚合物(Molecularly Imprinted Polymer，MIP)，通过静态吸附的方法研究了不同功能单体和致孔剂及其用量对模板聚合物特异性识别能力的影响．实验表明，以4-乙烯基吡啶(4-VP)为功能单体，在甲苯溶剂中聚合得到的固相萃取剂对DBT具有较大的吸附富集能力和识别特性．其饱和吸附容量达到48．3mg／g．