Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

LC Packing Materials for Pharmaceutical and Biomedical Analysis

 The author has prepared novel liquid chromatography (LC) packing materials for pharmaceutical and biomedical analysis. Those include LC packing materials for direct serum injection assays of drugs and their metabolites, LC packing materials for resolution of enantiomeric drugs, and uniformly sized molecularly imprinted polymers for drugs and their metabolites.     

聚氯乙烯接枝丙烯酸稀土的研究

将无机稀土有机化后与聚氯乙烯(PVC)进行接枝共聚。探讨了氧化稀土与丙烯酸反应、PVC接枝丙烯酸稀土的原理和方法，并通过红外光谱、扫描电镜对接枝共聚物进行定性表征，用微量热天平对接枝共聚物的热性能进行测定。实验结果表明，经丙烯酸稀土接枝共聚后的PVC，其耐热分解性能和韧性有了明显的提高。     

原子转移自由基聚合原位合成温敏性微球

以过硫酸钾为引发剂、丙酮-水[V(丙酮)∶V(水)＝4∶6]的混合溶剂为反应介质, 在少量二乙烯苯存在的条件下使苯乙烯(St)和对氯甲基苯乙烯(CMSt)进行无皂乳液共聚反应, 得到了粒径大小均匀的交联型聚苯乙烯(PSt)微球, 由X射线光电子能谱对表面组分测定发现: CMSt上的氯原子在聚合过程中富集于交联微球的表面. 以此交联型PSt微球为原子转移自由基聚合(ATRP)的引发剂, 在22 ℃下引发N-异丙基丙烯酰胺(NIPAAm)进行原位ATRP反应, 得到了表面原子转移自由基聚合接枝的交联聚苯乙烯(PNIPAAm-g-PSt)温敏性微球. 借助傅立叶变换红外光谱、差示扫描量热仪、扫描电子显微镜及激光光散射仪等对PNIPAAm-g-PSt的结构、相转变温度、形态及不同温度下的粒径变化进行了测定, 结果表明NIPAAm单体成功地原位ATRP接枝在交联PSt微球的表面, 接枝微球的球形更规整, 在水中的相转变温度约为32 ℃, 具有明显的温度敏感性.     

基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

3，19－二羟基－1－硫杂－5，8，11，14，17－五氧杂环二十烷的醚化与缩聚反应

３，１９－二羟基－１－硫杂－５，８，１１，１４，１７－五氧杂环二十烷（简称二羟基硫杂２０－冠－６）在一缩二乙二醇二甲醚和氢化钠存在下可与卤代烷顺利地进行醚化反应，得到双己氧基、双十二烷氧基、双十六烷氧基、双节氧基和双烯丙氧基硫杂２０－冠－６，同时也得到了单己氧基、单十二烷氧基、单十六烷氧基和单辛氧基单羟基疏杂２０－冠－６副产物。二羟基硫杂冠醚可顺利地与丁二酰氯缩聚，得到主链含硫杂冠醚基团的聚酯     

ADSORPTION OF 2,4-DICHLOROBENZOXYACETIC ACID ONTO HYPERCROSSLINKED RESIN MODIFIED BY PHENOLIC HYDROXYL GROUP (AM-1)

INTRODUCTIONAdsorption has been considered to be the best available technology for removing organics from water in the USSafe Drinking Water Act[1]. Due to many drawbacks of activated carbon[2-7], the most widely used adsorbent,hypercrosslinked polymeric adsorbents developed by Tsyurupa and Davankov[8] have been increasingly viewedas an alternative to activated carbon for selective removal of specific organic substances from contaminatedwater[9-12], and series of researches have been do…     

水解聚合铝溶液中Al30形态的研究

水解聚合铝形态一直是分析、催化、土壤、地球化学、新材料、环境科学和生物毒理学等众多领域研究的前沿和热点。Keggin 结构的Al₃₀ 形态是迄今为止发现的电荷最高的水解铝聚合阳离子,具有独特的分子结构和纳米分子尺寸,它对催化化学、新型功能材料、高效絮凝剂的开发以及铝的水解聚合转化规律研究具有重要意义。本文主要论述了Al₃₀形态的形成、形态分析方法、结构模型以及形成机理等方面的最新研究进展,并对水解聚合铝溶液的研究发展趋势进行了展望。     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.