Methanol electrooxidation on platinum mesh electrodes bonded to solid polymer electrolytes

Methanol electrooxidation on smooth platinum electrodes bonded to solid polymer electrolytes was studied in water and acid solution by voltammetric measurements with different scanning rates. An enhancement of the oxidation rates was observed in these systems as compared to identical platinum electrodes in contact with liquid electrolytes. This electrocatalytic effect strongly depends on the measuring conditions and on the electrode potential. The reasons for the catalytic effects at different potentials are discussed. Received: 8 January 1997 / Accepted: 1 December 1997     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

某些含二维液晶基元的热致液晶高分子的向列态纹影响构

发现某些含二维液晶基元的热致液晶高分子容易产生反向壁织构与含有高强度有错点（│Ｓ│大于１）的向列态纹影织构。这类液晶高分子的织构与形态学特点与含一维棒状液晶基元的其他液晶高分子不同。     

Monitoring formation of poly(neutral red) film by EQCM

An electrochemical quartz crystal microbalance (EQCM) is employed for monitoring the growth of poly(neutral red) films on platinum in the electrolytic solution containing 5.0 mmol dm⁻³ neutral red, 0.3 mol dm⁻³ H₂SO₄, and 0.5 mol dm⁻³ Na₂SO₄. The in situ measurement of the frequency changes of the EQCM reveals that both the adsorption/desorption of neutral red and the formation of poly(neutral red) film can be observed together with anion sorption/desorption during the redox transformation of the polymer, and that the polymerization rate of neutral red increases slowly before the 11th cycle and then increases quickly with increasing number of potential cycles. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 3, pp. 284–289. The text was submitted by the authors in English.     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

Highly hydrophobically modified polyelectrolytes: Field variables to control emulsion type

Highly hydrophobically modified (with n-dodecylamide chain) linear poly(acrylic acid)s (HHMPAAH) and poly(sodium acrylate)s (HHMPAANa) with various degrees of grafting (τ) were synthesized and used as emulsifiers of the n-dodecane/water system. The type of emulsion, oil in water (O/W) or water in oil (W/O), was investigated as a function of the polymer chemical structure (τ, salt or acid form of the copolymer) and aqueous phase electrolyte concentration (NaNO₃). Increasing τ and/or salt concentration was found to favor the formation of inverse emulsions. Direct liquid–liquid dispersions are more likely to form with poly(sodium acrylate)s than with poly(acrylic acid)s. Hence, field variables such as τ, pH and ionic strength are relevant parameters to control emulsion type. Moreover, a balanced polyelectrolyte neither soluble in oil nor in water was synthesized for the first time. With this original emulsifier, the dispersion type was found to change from O/W to W/O with polymer salting out. The work provides convenient model system for fundamental studies of polymer conformation at liquid–liquid interfaces. Received: 31 March 1998 Accepted: 30 April 1998     

Polyaniline and polypyrrole: A comparative study of the preparation

Aniline and pyrrole have been oxidized with ammonium peroxydisulfate in aqueous solutions, in the presence of equimolar quantities of hydrochloric acid. The oxidation of pyrrole was faster; the induction period typical of aniline oxidation was absent in the case of pyrrole. As the proportion of oxidant-to-monomer molar concentration increased up to 1.5, the yield increased in both cases. Similarities between the two oxidations are illustrated and discussed. The oxidant-to-monomer molar ratio 1.25 is proposed to be the optimum stoichiometry, in the accordance with the data published in the literature. The conductivities of the polymers prepared were only slightly dependent on the oxidant-to-monomer ratio in the range 0.3-1.5, and were of the order of 10⁰ S cm⁻¹ for polyaniline and ∼10⁻²-10⁻¹ S cm⁻¹ for polypyrrole. Outside this interval, the conductivity of both polymers was reduced. Polyaniline having conductivity ∼10 S cm⁻¹ was produced in solutions of phosphoric acid of various concentrations. On the contrary, the conductivity of polypyrrole was reduced as the concentration of phosphoric acid became higher. The type of protonation is discussed with the help of FTIR spectra by analyzing the ammonium salts obtained after deprotonation. Sulfate or hydrogen sulfate anions produced from peroxydisulfate always constitute a part of the counter-ions.     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998