噻虫胺分子印迹电化学传感器的制备与应用EI北大核心CSCD

以噻虫胺为模板分子,通过恒电位沉积壳聚糖,在还原氧化石墨烯(RGO)修饰的玻碳电极表面制备了可特异性识别噻虫胺的分子印迹传感器。采用交流阻抗法(EIS)、差分脉冲伏安法(DPV)和循环伏安法(CV)对传感器的电化学性能进行表征,优化了电沉积时间、洗脱圈数、孵化时间及溶液pH等实验条件。在优化条件下,以K_(3)[Fe(CN)_(6)]作为电活性探针,DPV峰电流强度与噻虫胺浓度在1.0~1000 nmol/L范围内呈良好的线性关系,检出限0.46 nmol/L。将本方法应用于实际样品中噻虫胺的含量测定,加标回收率为97.6%~103.2%。     

Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review

The rapidly growing existence of a number of contaminants (i.e. heavy metals, dye compounds, explosives and pesticides etc.) in environment is an alarming concern not only due to their harmful impacts for the environment bur also due to their potential high risk for human health. Thus, the careful and sensitive detection of these environmental contaminants is ver crucial. Electrochemical sensors combined with molecularly imprinted polymers (MIPs) become an attractive area for environmental monitoring. Benefiting from their great features such as high chemical and physical stability, cheap preparation process, excellent selectivity, sensitivity and fast response towards the target compound/s.This review paper aims to present and highlight the latest progresses in the design and development of novel electrochemical sensor systems composed of MIPs and carbon paste electrodes (CPEs) for the sensitive detection of pollutants in environmental samples.     

磁性分子印迹电化学传感法检测痕量奥卡西平

该文以4-乙烯基吡啶和甲基丙烯酸酯为原料制备了一种可用于检测奥卡西平（OXC）的磁性分子印迹 电化学传感器（MNPs－MIP/MCPE）。首先,依据密度泛函数理论（DFT/B3LYP/6－31 + G）计算,实验成功地 筛选和构建出 OXC与功能单体的最佳组合及比例。随后,基于沉淀聚合法合成了能够识别 OXC的磁性分子 印迹膜（MNPs－MIP）,将MNPs－MIP覆于碳糊电极（MCPE）表面制成MNPs－MIP/MCPE。采用差分脉冲伏安 法（DPV）将 MNPs－MIP/MCPE 传感器用于不同浓度 OXC 的测定。结果显示,传感器的峰电流信号随 OXC 浓 度的增大而增大,且OXC分别在5 × 10－8 ～3 × 10－6 mol/L和3 × 10－6 ～1. 5 × 10－4 mol/L浓度范围内与其峰电流 信号呈线性关系,其线性方程分别为：Ip （μA）= 1. 755 + 1. 097c（μmol/L）,相关系数（r）= 0. 999 7 和 Ip （μA）= 0. 131 + 5. 177c（μmol/L）,r = 0. 999 6。OXC的检出限（LOD = 3S/m）为2. 06 × 10－8 mol/L。该传感器成 功用于实际样品中OXC含量的检测,其回收率为99. 4%~101%,相对标准偏差（RSD）为1. 5%～2. 5%。     

液晶分子印迹整体柱的制备及其分子识别热力学

液晶分子印迹聚合物(MIPs)因刚性液晶单体的加入而在超低交联度水平下也能印迹和识别模板分子,有效解决了传统MIPs因高交联度造成的位点包埋、结合容量低、传质慢等问题。尽管液晶MIPs具有如此独特的优势,但却面临着由于交联度的大幅度降低而导致印迹效果下降的问题。为了研究液晶MIPs的结合特性,制备具有良好印迹效果的低交联液晶MIPs,该文通过二次接枝聚合,制备了一系列不同交联度的液晶分子印迹整体柱,用高效液相色谱法研究了聚合参数与印迹整体柱亲和性的关系。实验中选用三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,以甲苯和十二醇为致孔剂合成整体柱骨架,并在此基础上以(S)-萘普生为模板,加入液晶单体4-氰基苯基单环己基乙烯(CPCE)进行二次聚合接枝。实验中系统考察了流动相中乙腈比例及缓冲液pH值对色谱保留的影响,结果发现液晶单体的加入使得MIPs对萘普生保留控制机制由原来的氢键作用变为了疏水作用;通过动态吸附实验得到的突破曲线经前沿分析及对吸附等温线Langmuir、Freundlich和Scatchard分析拟合,发现交联度为15%时液晶MIPs印迹因子最大(3.78)、非均一性最强,且特异性吸附量高于非特异性吸附量。液晶MIPs的计量置换模型(SDM-R)分析表明,液晶印迹整体柱对模板分子的总亲和力(ln A=0.645)明显高于其类似物;而从空间匹配程度看,与液晶印迹整体柱空间匹配程度最高的是酮洛芬而非模板分子,但液晶印迹整体柱对酮洛芬的总亲和力(ln A=0.242)不及模板分子的一半,表明在本低交联液晶印迹系统中,空间效应不是决定印迹系统识别能力的主要因素。进一步的分离热力学研究发现,低交联液晶印迹柱的|ΔΔH|<T|ΔΔS|,而交联度为70%的非液晶MIPs柱的|ΔΔH|>T|ΔΔS|,表明液晶MIPs的分离过程是一个熵控制过程,而常规无液晶MIPs的分离过程是一个焓控制过程。上述结果表明,液晶单体的加入改变了MIPs的识别机制,适当的低交联度可显著提高液晶MIPs的识别性能,因此液晶MIPs这些特质有望使其成为新一代的MIPs。     

A High Sensitivity Electrochemical Sensor Based on Fe3+‐Ion Molecularly Imprinted Film for the Detection of T‐2 Toxin

The excellent detection sensitivity in various matrices of T‐2 toxin (T‐2), which has cytotoxic and immunosuppressive effects in DNA and RNA synthesis, is a highly desirable characteristic. A sensitive molecularly imprinted electrochemical sensor was constructed for the selective detection of T‐2. In this study, iron ions (Fe³⁺) were introduced to increase the chelation of the metal ions and templates for preparing molecularly imprinted polymers (MIPs). With the increased chelation of the metal ions and templates, the selectivity and sensitivity of the MIPs were effectively improved. The imprinted sensor was successfully employed to detect T‐2 in cereals and human serum samples.     

对硝基苯酚分子印迹聚合物最佳功能单体的筛选及其水样固相萃取中的应用

以对硝基苯酚(4-NP)为对象,采用非印迹聚合物(NIP)库筛选法选出乙烯基咪唑为最佳功能单体,通过实验选出乙腈为最合适的聚合溶剂、三甲氧基丙基三甲基丙烯酸酯(TRIM)为交联剂制备分子印迹聚合物。对固相萃取进行了优化,用pH=2.5的磷酸盐缓冲溶液上样、体积比为45∶55的乙腈和磷酸盐缓冲溶液淋洗、甲醇洗脱条件下,聚合物具有最佳印迹效果。4-NP分子印迹聚合物的表观吸附量达到5.8 mg/g。该印迹聚合物对4-NP及其结构类似物苯酚和对氯苯酚的萃取回收率分别为96.0%、78.8%和77.8%,表明具有较高的选择性,还成功地用于自来水样品中4-NP的固相萃取,回收率达到93.1%。由此可得该方法快速、有效,可用于分子印迹聚合物优化制备。     

Rapid,simple and selective determination of 2,4-dinitrophenol by molecularly imprinted spin column extraction coupled with fluorescence detection

A rapid, simple and selective method based on molecularly imprinted, spin column extraction coupled with fluorescence detection was successfully established for the determination of 2,4-dinitrophenol in serum samples. The 2,4-dinitrophenol imprinted polymers exhibited highly selective recognition for the template molecule and the maximum adsorption capacity was 138.9 mg/g. The results indicated that when water is used as the loading solution, only 2,4-dinitrophenol could be adsorbed on the spin column without the remaining structural analogs（2-nitrophenol, 4-nitrophenol and phenol）. After eluting with acetonitrile/acetic acid（9/1, v/v）, 2,4-dinitrophenol in serum samples could be determined by using the fluorescence spectrometer, based on the fluorescence enhancement of fluorescein by the template molecule. Under the optimal conditions, the spiked recovery ranged from 95.8% to 103.4% and the detection limit was 1 nmol/L. The results confirmed the reliability and practicality of the protocol and revealed a good perspective of this method for biological sample analysis.     

Molecularly Imprinted Impedimetric Sensor for Determination of Mycotoxin Zearalenone

The mycotoxin zearalenone (ZEA) prompts reproductive toxicity due to its strong estrogenic effects. In this work, an electrochemical sensor for determination of ZEA was developed by electropolymerization of a molecularly imprinted poly (o‐phenylenediamine) (PPD) film on screen‐printed gold electrode (SPGE) surface. The sensor was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K₃[Fe(CN)₆]/K₄[Fe(CN)₆] as redox probe. The molecularly imprinted polymer (MIP) sensor showed a wide determination range from 2.50 to 200.00 ngmL^?1 for ZEA. The Limit of detection (LOD) was calculated to be 0.20 ngmL^?1, based on the signal to noise (S/N) ratio equal to 3.0. The sensor displayed good repeatability, with RSD values≤4.6 %, and maintained 93.2 % of its initial response after storage for 10 days in air at room temperature. The developed method was successfully applied for the determination of ZEA in corn flakes with mean recoveries ranged from 96.2 % to 103.8 % and RSDs within the interval of 2.1 % to 3.8 %.     

Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection

Curcumin widely exists in food, and rapid selective and accurate detection of curcumin have great significance in chemical industry. In this experiment, a new magnetic biocompatibility molecularly imprinted polymer was prepared with nontoxic and biocompatible Zein to adsorb curcumin selectively. The polymer has high biocompatibility, good adsorption capacity, and specific adsorption for curcumin. Combined with portable electrochemical workstations, the polymer can be used to detect curcumin rapidly and cost‐effectively. Using curcumin as a template and Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles for solid phase extraction. The experimental results showed that the polymer reached large adsorption capacity (32.12 mg/g) with fast kinetics (20 min). The adsorption characteristic of the polymer followed the Langmuir isotherm and pseudo‐second‐order kinetic models. Hexacyanoferrate was used as electrochemical probe to generate signals, and the linear range was 5–200 µg/mL for measuring curcumin. The experimental analysis showed that the polymer was an ideal material for selective accumulation of curcumin from complex samples. This approach has been successfully applied to the determination of curcumin in food samples with electrochemical detection, indicating that this is a feasible and practical technique.     

Magnetic molecularly imprinted specific solid‐phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC

The naturally occurring quercetin flavonoid, dihydroquercetin, is widely distributed in plant tissues and has a variety of biological activities. Herein, a magnetic molecularly imprinted solid‐phase extraction was tailor made for selective determination of dihydroquercetin in Larix griffithiana using high‐performance liquid chromatography. Amino‐functionalized core‐shell magnetic nanoparticles were prepared and characterized using scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, and infrared spectroscopy. The polymer had an average diameter of 250 ± 2.56 nm and exhibited good stability and adsorption for template molecule, which is enriched by hydrogen bonding interaction. Multiple factors for extraction, including loading, washing, elution solvents, and extraction time, were optimized. The limit of detection was 1.23 μg/g. The precision determined at various concentration of dihydroquercetin was less than 4% and the mean recovery was between 74.64 and 101.80%. It has therefore been shown that this protocol can be used as an alternative extraction to quantify dihydroquercetin in L. griffithiana and purify quercetin flavonoid from other complex matrices.