Double-ion imprinted polymer @magnetic nanoparticles modified screen printed carbon electrode for simultaneous analysis of cerium and gadolinium ions

A typical, reproducible, and rugged screen printed carbon electrode, modified with dual-ion imprinted beads, was fabricated employing the “surface grafting from” approach. For this, the acyl chloride functionalized magnetic nanoparticles were first immobilized and chemically attached with a typical functional monomer (but-2-enedioic acid bis-[(2-amino-ethyl)-amide]) on the electrode surface. This was subsequently subjected to the thermal polymerization in the presence of template ions (Ce(IV) and Gd(III)), cross-linker (ethylene glycol dimethacrylate), initiator (AIBN), and multiwalled carbon nanotubes. The modified sensor was used for the simultaneous analysis of both template ions in aqueous, blood serum, and waste-water samples, using differential pulse anodic stripping voltammetry which revealed two oxidation peaks for respective templates with resolution as much as 950 mV, without any cross reactivity, interferences and false-positives. The detection limits realized by the proposed sensor, under optimized conditions, were found to be as low as 0.07 ng mL⁻¹ for Ce(IV) and 0.19 ng mL⁻¹ for Gd(III) (S/N = 3) that could eventually be helpful for lanthanide estimation at stringent levels.     

Fabrication of the Monolithic Fiber for the Solid Phase Micro‐extraction of Malachite Green

A monolithic fiber of molecularly imprinted polymer (MIP) was prepared by in situ polymerization within the capillary with an inner diameter of 530 µm. It was carried out in 8 min by microwave irradiation using malachite green (MG) as a template molecule, α‐methacrylic acid (MAA) as a functional monomer, acetonitrile (ACN) as a porogenic solvent, ethylene dimethacrylate (EDMA) as a crosslinker, azodiiso‐butyronitrile (AIBN) as a thermal initiator. The resulted MIP fibers were pushed out from the capillary, eluted and inserted in the capillary again, which successfully used for the solid phase microextraction (SPME) procedure. The factors affecting the extraction of MG, such as the molar ratio of template/monomer (MG/MAA), concentration of NaCl, extraction and desorption time, and extraction and desorption solvents were investigated in detail. The selectivity of the MIP fibers was compared using MG analogues crystal violet (CV) and non‐analogue Sudan II. It was also employed for the pretreatment of trace MG in the fish feed followed by high‐performance liquid chromatography (HPLC) detection. Under the optimal conditions, the linear range of MG was 10‐600 μg/L, the detection limit (LOD) was 1.23 μg/L and the recovery of spiked fish feed sample was 88.7～113.9%.     

Water‐Soluble Molecularly Imprinted Nanoparticles (MINPs) with Tailored,Functionalized, Modifiable Binding Pockets

Construction of receptors with binding sites of specific size, shape, and functional groups is important to both chemistry and biology. Covalent imprinting of a photocleavable template within surface–core doubly cross‐linked micelles yielded carboxylic acid‐containing hydrophobic pockets within the water‐soluble molecularly imprinted nanoparticles. The functionalized binding pockets were characterized by their binding of amine‐ and acid‐functionalized guests under different pH values. The nanoparticles, on average, contained one binding site per particle and displayed highly selective binding among structural analogues. The binding sites could be modified further by covalent chemistry to modulate their binding properties.     

基于制备接枝型分子印迹膜构建农药电位型电化学传感器及其检测性能研究

基于分子设计,以氯甲基化聚砜(CMPSF)为基膜,阴离子单体对苯乙烯磺酸钠(SSS)为功能单体,N,N'-亚甲基双丙烯酰胺(MBA)为交联剂,在表面引发体系-NH2/S2O2-8的作用下,采用"接枝聚合与分子印迹同步进行"的分子表面印迹新技术,制备了接枝型农药抗蚜威分子印迹膜(MIM)。采用红外光谱(FITR)和光学显微镜(OM)对该分子印迹膜进行表征,通过等温结合实验与竞争吸附实验,考察了抗蚜威分子印迹膜的分子识别性能与机理。以该印迹膜作为敏感膜,构建了抗蚜威电位型传感器,并对其检测性能进行了考察。结果表明,所制备的接枝型印迹膜对模板抗蚜威分子具有特异的识别选择性和优良的结合亲和性,结合容量高达92μg/cm2,相对于分子结构与抗蚜威相似的阿特拉津,印迹膜对抗蚜威的选择性系数为4.537。在p H 4.0的水介质中,传感器膜电极的电位响应与抗蚜威浓度对数在1.0×10-6~1.0×10-3mol/L范围内呈良好的线性关系(r=0.999 9),其检出限为2.5×10-8mol/L;以抗蚜威分子印迹膜为敏感膜所构建的电位型传感器,其构建过程简捷,检测灵敏准确,电位响应快速(t10 s)。     

罗丹明B分子印迹固相萃取小柱的研制及应用

研制一种对罗丹明B具有特异性识别性能的分子印迹固相萃取小柱。用沉淀聚合法制备罗丹明B分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其性能,并对市售辣椒样品中的罗丹明B进行测量。罗丹明B模板聚合物的吸附能力明显优于空白聚合物;印迹固相萃取小柱对罗丹明B标准溶液(0.05 mmol/L)一次性萃取率为98.24%,实际样品测量的回收率为90.0%~95.0%,测定结果的相对标准偏差为0.9%~1.7%(n=3)。罗丹明B分子印迹固相萃取小柱选择性好、萃取率高,可应用于食品、化妆品检测等相关领域。     

Solid‐phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water

This work reports the preparation of molecularly imprinted polymer particles for the selective extraction and determination of four benzophenones from aqueous media. The polymer was prepared by using 4‐vinylpridine as functional monomer, ethylene glycol dimethacrylate as cross‐linker, acetonitrile as porogenic solvent and 2,2’,4,4’‐tetrehydroxybenzophenone as template. Good specific adsorption capacity (Q_max = 27.90 μmol/g) for 2,2’,4,4’‐tetrehydroxybenzophenone was obtained in the sorption experiment and good class selectivity for 2,2’,4,4’‐tetrehydroxybenzophenone, 2,4‐dihydroxybenzophenone, 2,2’‐dihydroxy‐4‐methoxybenzophenone, 2,2’‐dehydroxy‐4,4’‐dimethoxybenzophenone was demonstrated by the chromatographic evaluation experiment. Factors affecting the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were investigated systematically. An accurate and sensitive analytical method based on the molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection has been successfully developed for the simultaneous determination of four benzophenones from tap water and river water with method detection limits of 0.25–0.72 ng/mL. The recoveries of benzophenones for water samples at two spiking levels (500 and 5000 ng/mL for each benzophenone) were in the range of 86.9–103.3% with relative standard deviations (n = 3) below 9.2%.     

Imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide for the determination of m‐cresol in synthetic and real samples

m‐Cresol‐imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide have been developed that contain specific pockets for the selective uptake of m‐cresol. Silica nanoparticles were synthesized by a sol–gel process followed by functionalization of their surface with N‐propylsilylmorpholine‐4‐carboxamide. The formation of m‐cresol‐imprinted silica nanoparticles was confirmed by UV‐Vis spectrophotometry, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. Electron microscopic studies revealed the formation of monodispersed imprinted silica nanoparticles with spherical shape and an average size of 83 nm. The developed nanoparticles were filled in a syringe and used for the extraction of m‐cresol from aqueous samples followed by quantification using high‐performance liquid chromatography with diode array detection. Various adsorption experiments showed that developed m‐cresol‐imprinted silica nanoparticles exhibited a high adsorption capacity and selectivity and offered a fast kinetics for rebinding m‐cresol. The chromatographic quantification was achieved using mobile phase consisting of acetonitrile/water (70:30 v/v) at an isocratic flow rate of 1.0 mL/min using a reversed‐phase C₁₈ column and detection at λ_max = 275 nm. The limits of detection and quantification were 1.86 and 22.32 ng/mL, respectively, for the developed method. The percent recoveries ranged from 96.66–103.33% in the spiked samples. This combination of this nanotechnique with molecular imprinting was proved as a reliable, sensitive and selective method for determining the target from synthetic and real samples.     

双酚F分子印迹聚合物的制备及其对水相中双酚F吸附性能的研究

以双酚F(4,4′-BPF)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用沉淀聚合法合成4,4′-BPF分子印迹聚合物(MIPs)。运用傅里叶红外(FT-IR)光谱对产物的结构进行表征,并对其吸附等温线、吸附动力学、吸附热力学及选择性识别性能进行研究。结果表明:MIPs对水相中4,4′-BPF具有特异性吸附,最大吸附容量为82.8 mg/g;Freundlich模型拟合吸附等温线的相关系数R2=0.995;热力学参数ΔG、ΔS、ΔH均小于0,表明此吸附过程是自发进行的、熵减的、放热的。     

超高效液相色谱-大气压化学电离-三重四极杆质谱联用法快速测定食品中苯并[a]芘

建立了快速检测食品中苯并[a]芘的超高效液相色谱-三重四极杆质谱联用(UPLC-MS/MS)分析方法。样品用正己烷提取后,经分子印迹固相萃取柱净化,以甲醇和水作为流动相进行梯度洗脱,在XBridge BEH C18柱上实现分离,大气压化学电离(APCI)-三重四极杆质谱正离子MRM方式检测,以苯并[a]芘-d12作为内标的稳定同位素稀释法定量。方法的线性范围为0.07~50μg/kg,定量限为0.07μg/kg。平均加标回收率为86%~104%,相对标准偏差为2.3%~14%。该方法灵敏、准确,适用于食品中苯并[a]芘的测定,已应用于实际样品的检查。     

Study of structural parameters on the adsorption selectivity of a molecularly imprinted polymer

This work was focused on the influence of match degree of structure parameters i.e. molecular size, volume and polarity (denoted as R_d, V_d and P_d) between imprinted cavities in Qu-MIP and Xn on the adsorption selectivity. The results presented that the influence of R_d on the adsorption selectivity was the largest and the most regular, while the influence of P_d was the smallest and the most irregular. Besides, the influence degree of V_d was decreased in general with the increase of R_d. However, as R_d was in the threshold of [0.99, 1.02], V_d would rise to the major influence factor. Furthermore, utilizing data obtained from experiment, the influence authority of R_d, V_d and P_d on the adsorption selectivity was calculated theoretically through multiple linear regression and principal component analysis of IBM SPSS Statistics 20, and results showed the authority order was R_d, V_d and P_d at any circumstance despite the value was different, which was in accordance with the result we directly inducted from the experiment.