Development of solid‐phase microextraction coupled with liquid chromatography for analysis of tramadol in brain tissue using its molecularly imprinted polymer

In this work, performance of a molecularly imprinted polymer (MIP) as a selective solid‐phase microextraction sorbent for the extraction and enrichment of tramadol in aqueous solution and rabbit brain tissue, is described. Binding properties of MIPs were studied in comparison with their nonimprinted polymer (NIP). Ten milligrams of the optimized MIP was then evaluated as a sorbent, for preconcentration, in molecularly imprinted solid‐phase microextraction (MISPME) of tramadol from aqueous solution and rabbit brain tissue. The analytical method was calibrated in the range of 0.004 ppm (4 ng mL⁻¹) and 10 ppm (10 μg mL⁻¹) in aqueous media and in the ranges of 0.01 and 10 ppm in rabbit brain tissue, respectively. The results indicated significantly higher binding affinity of MIPs to tramadol, in comparison with NIP. The MISPME procedure was developed and optimized with a recovery of 81.12–107.54% in aqueous solution and 76.16–91.20% in rabbit brain tissue. The inter‐ and intra‐day variation values were <8.24 and 5.06%, respectively. Finally the calibrated method was applied for determination of tramadol in real rabbit brain tissue samples after administration of a lethal dose. Our data demonstrated the potential of MISPME for rapid, sensitive and cost‐effective sample analysis.     

Optical Determination of Cholesterol in Milk with Molecularly Imprinted Polymer-Coated Quantum Dots

Fluorescent molecularly imprinted polymer-coated CdSe/ZnS quantum dots were prepared in an efficient one-step synthesis. Their application as fluorescent nanoparticles for the direct quantification of cholesterol in milk was characterized. The quantum dots were used as cores to produce fluorescence. The molecularly imprinted polymer shells provided specific binding sites for cholesterol. The system exhibited good linearity for cholesterol from 0.5 to 150?µg?mL^?1, a low detection limit of 0.15?µg?mL^?1, and acceptable reproducibility with a relative standard deviation of 4.2% for six replicates. The molecularly imprinted polymer-coated quantum dots were used to determine cholesterol in fortified milk. Recoveries were from 87.0 to 105.2% and a possible mechanism is proposed. The fluorescent molecularly imprinted polymer-coated quantum dots exhibited excellent selectivity and provide a simple, rapid, selective, and effective analytical approach.     

表面接枝法制备磁性邻苯二甲酸二丁酯印迹聚合物及其识别性能研究

采用表面接枝法对四氧化三铁纳米粒子表面进行功能化修饰,以二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,成功制备了对邻苯二甲酸二丁酯(DBP)具有特异识别性能的磁性表面印迹聚合物(MMIPs).利用扫描电镜、透射电镜、振动样品磁强计、元素分析、红外光谱等对其进行表征.BET测试结果表明,MMIPs的比表面积(380 m2/g)大于MNIPs(324 m2/g).吸附动力学、等温线模型分析显示,MMIPs对DBP的Sips等温线模型相关系数R2=0.999,动力学Pseudo-second-order 模型相关系数(R2)为0.9797.对邻苯二甲酸二烯丙酯(DAP)、DBP和邻苯二甲酸二(2-乙基己基)酯(DEHP)的印迹因子分别为1.53、2.21和1.39,对DBP具有较高的印迹因子和较好的识别性能.磁性分子印迹聚合物经5次再生后,对DBP的吸附能力仅下降了12.3％,表明再生循环效果较好.     

分子印迹材料研究进展

本文简要综述了分子印迹的原理、制备技术,着重介绍了与膜材料、磁性材料、纳米材料和复合材料相结合的分子印迹技术的应用与发展。     

利用分子印迹传感器选择性测定绿麦隆

以绿麦隆为模板分子,邻氨基酚为功能单体,在金电极表面电聚合制得具有特异性识别孔穴的绿麦隆分子印迹膜。采用循环伏安、差分脉冲伏安法研究了印迹膜的性能、结构、分子印迹效应和模板分析物,并比较了传感器对其它结构相似化合物的选择性响应,发现该传感器对绿麦隆检测具有良好的选择性。绿麦隆浓度在3.0×10-7~1.5×10-6mol/L范围内与峰电流呈线性关系,检出限为1.0×10-7mol/L,在干扰物质共存情况下的回收率为105%~116%。     

Synthetic approaches to parabens molecularly imprinted polymers and their applications to the solid-phase extraction of river water samples

In this paper we describe the synthesis, characterisation and use of two distinct molecularly imprinted polymers (MIPs) prepared using esters of p-hydroxybenzoic acid (parabens) as templates: one MIP was synthesised by precipitation polymerisation using a semi-covalent molecularly imprinting strategy with methyl paraben as the template/target (MIP 1); the second MIP was prepared in monolithic form through a conventional non-covalent molecular imprinting strategy, with butyl paraben as the template (MIP 2). MIP 1 recognized methyl paraben, showed cross-selectivity for other parabens analytes used in the study and higher affinity towards these compounds than did a non-imprinted control polymer. Similarly, MIP 2 demonstrated higher affinity towards paraben analytes than a non-imprinted control polymer.For the analysis of environmental water samples, a solid-phase extraction (SPE) protocol was developed using MIP 2 as sorbent, and results were compared to a SPE using a commercial sorbent (Oasis HLB). With MIP 2 as sorbent and butyl paraben as target, when percolating 500 mL of river water spiked at 1 μg L⁻¹ through the SPE cartridge, and using 1 mL of isopropanol as cleaning solvent, a higher recovery of butyl 4-hydroxybenzoate (butyl paraben) and a cleaner chromatogram where achievable when using the MIP compared to the commercial sorbent.     

Synthesis and applications of diethylstilbestrol-based molecularly imprinted polymer-coated hollow fiber tube

A novel molecularly imprinted polymer-coated polypropylene hollow fiber tube (MIP-HFT) was photoinitiated for the copolymerization of diethylstilbestrol (DES) as a template molecule, α-methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a crosslinking agent. The characteristics and applications of the MIP-HFT were investigated. In order to compare its characteristics with those of a non-imprinted polymer-immersed hollow fiber tube, the selectivity of the MIP-HFT was investigated using dienestrol and hexestrol as the structural analogues of a DES template, and phenol and methylbenzene were taken as reference compounds. The MIP-HFT was employed in the HPLC analysis of spiked milk samples. The detection limits of the method were found to be in the range 2.5-3.3 μg L⁻¹ for DES, dienestrol and hexestrol and the RSD% were in the range 6.4-8.9. The limits of quantitation were found to be in the range 8.7-9.4 μg L⁻¹ in milk for DES, dienestrol and hexestrol, and their average recoveries were 83.7-90.6% in the spiked milk samples. The experimental results revealed that the MIP-HFT provides a good carrier for the selective adsorption of DES and its chemical structure analogs, and can be used for the preconcentration of these compounds in complicated samples.     

Preparation and characterization of molecularly imprinted microspheres for dibutyl phthalate recognition in aqueous environment

Molecularly imprinted microspheres (MIMs) were prepared by suspension polymerization for the binding and recognition of dibutyl phthalate (DBP). DBP was used as the template molecule, methacrylic acid as the functional monomer, ethylene dimethacrylate (EDMA) as the linking agent, PVA as the dispersing agent, and Span 60 as the surfactant. The MIMs were characterized with electron microscope scanning and rebinding experiments. The Scatchard plot revealed that the template‐polymer system has a two‐site binding behavior with dissociation constants of 4.05 and 0.515 mmol/L. The MIMs exhibited the highest selective rebinding to DBP at 736.85 μg/g. The recoveries of the MIM‐SPE column for DBP extraction was 94.75–101.9% with the RSD of 1.5–7.3%, indicating the feasibility of the prepared MIMs for DBP extraction. Finally, the method developed was used to analyze the trace levels of phthalate in aqueous environment samples.     

Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn

A molecularly imprinted polymer (MIP) with metolachlor as template was firstly coated on stainless steel fiber through chemical bonding strategy to solve the fragility problem of silica fiber substrate for solid-phase microextraction. The surface pretreatment of stainless steel fiber and the polymerization conditions were investigated systematically to enhance the preparation feasibility and MIP coating performance, and then a porous and highly cross-linked MIP coating with 14.8-μm thickness was obtained with over 200 times re-usability which was supported by non-fragile stainless steel fiber adoption. The MIP coating possessed specific selectivities to metolachlor, its metabolites and other chloroacetanilide herbicides with the factors of 1.1–4.6. Good extraction capacities of metolachlor, propisochlor and butachlor were found with MIP coating under quick adsorption and desorption kinetics, and the detection limits of 3.0, 9.6 and 38 μg L⁻¹ were achieved, respectively. Moreover, the MIP-coated stainless steel fiber was evaluated for trace metolachlor, propisochlor and butachlor extraction in the spiked soybean and corn samples, and the enrichment factors of 54–60, 27–31 and 15–20 were obtained, respectively.     

Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers

A method for the simultaneous determination of four fluoroquinolones of veterinary use (ciprofloxacin, danofloxacin, enrofloxacin and sarafloxacin) in two complex matrixes, such as bovine raw milk and pig kidney, has been established and validated. The method is based on the use of capillary electrophoresis (CE) coupled with a very sensitive detection mode, such as laser induced fluorescence (LIF) detection, due to the fact the all the compounds selected show native fluorescence. In order to achieve high selectivity in the sample treatment procedure, a commercially available molecularly imprinted polymer has been used for the solid phase extraction of the analytes. Once the retention and elution processes were optimized, the final extract was analyzed by CE-LIF using a 325 nm He–Cd laser. Optimum separation was obtained in a 70 cm × 75 μm capillary using a 125 mM phosphoric acid solution at pH 2.8 with 36% methanol as background electrolyte. The method provided very low detection limits, ranging from 0.17 to 0.98 μg/kg for milk and 1.10 to 10.5 μg/kg for kidney, with acceptable precision and satisfactory recoveries.