H2O−D2O solvent isotope effect in the volume behavior of some high-charge high-size electrolytes

The apparent molar volumes V of KCl, BaCl₂, K₂SO₄, LaCl₃, Co(en)₃Cl₃ [Tris(ethylenediamine)cobalt(III) chloride], K₃Co(CN)₆, K₃Fe(CN)₆, K₄Fe(CN)₆, and Ba₃[Co(CN)₆]₂ have been determined at 25°C in both light and heavy water. The V values in D₂O are systematically lower and increase more rapidly with salt concentration than the V in H₂O. The volume of transfer from H₂O to D₂O as well as the partial molar volume at infinite dilution in both solvents have also been calculated. These results together with literature values for other electrolytes were used to estimate both of these quantities for D₂O solutions of individual ions. The predictions of ion hydration models and ion-ion interactions are compared with experimental observations.     

几种杂多阴离子柱撑水滑石的合成与吸附行为

柱撑水滑石类层柱状阴离子粘土是一类新型层柱材料，由于其二维孔道结构的可调变性及潜在的择形催化性能，已引起人们的重视[1-3]．迄今，人们已合成了包括无机和有机阴离子，同多和杂多阴离子（Polyoxometalates，简称POMs）以及配合物阴离子在内的多种柱撑水滑石，其中同多和     

Erosion of efficiency in non-uniform linear chromatography

In linear chromatography (i.e. chromatography performed in the absence of sample overloading), when the plate height of a column is roughly uniform along its length, variations in the velocities of solutes are the only possible causes of erosion of efficiency. The sources of these variations (variations in capacity ratio and in the density of the mobile phase, etc.) play no direct role in the erosion of efficiency except through their effect on solute velocities. In other words, what eventually causes the erosion of efficiency is merely variation in the time required for solutes to traverse equally small segments of a column. Significant erosion can only arise from abrupt and deep deceleration of solutes in one or several relatively small segments of a column. If erosion of efficiency caused by pressure gradients in linear SFC is to be large, the depth and the sharpness of the deceleration of a solute must go beyond that hitherto confirmed experimentally. Many relevant examples are analyzed graphically.     

Friedel-crafts acylation of 2-methoxynaphthalene over h-beta catalysts: effect of Si/Al ratio

The acylation of 2-methoxynaphthalene with acetic anhydride was carried out over zeolite beta catalysts having various Si/Al ratios. It was found that the reaction performance is strongly dependent on the Si/Al ratio of the catalyst. The catalytic reaction features were elucidated in terms of the acidic properties of the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Critical exponents,hyperscaling, and universal amplitude ratios for two- and three-dimensional self-avoiding walks

We make a high-precision Monte Carlo study of two- and three-dimensional self-avoiding walks (SAWs) of length up to 80,000 steps, using the pivot algorithm and the Karp-Luby algorithm. We study the critical exponentsv and 2 ₄ – as well as several universal amplitude ratios; in particular, we make an extremely sensitive test of the hyperscaling relationdv = 2 ₄ –. In two dimensions, we confirm the predicted exponentv=3/4 and the hyperscaling relation; we estimate the universal ratios <R _g ² >/<R _e ² >=0.14026±0.00007, <R _m ² >/<R _e ² >=0.43961±0.00034, and ^*=0.66296±0.00043 (68% confidence limits). In three dimensions, we estimatev=0.5877±0.0006 with a correctionto-scaling exponent ₁=0.56±0.03 (subjective 68% confidence limits). This value forv agrees excellently with the field-theoretic renormalization-group prediction, but there is some discrepancy for ₁. Earlier Monte Carlo estimates ofv, which were 0.592, are now seen to be biased by corrections to scaling. We estimate the universal ratios <R _g ² >/<R _e ² >=0.1599±0.0002 and ^*=0.2471±0.0003; since ^*>0, hyperscaling holds. The approach to ^* is from above, contrary to the prediction of the two-parameter renormalization-group theory. We critically reexamine this theory, and explain where the error lies. In an appendix, we prove rigorously (modulo some standard scaling assumptions) the hyperscaling relationdv = 2 ₄ – for two-dimensional SAWs.     

Molar heat capacities and volumes of transfer of cytosine,thymine, caffeine and 1,3-diethylthymine to aqueous solutions of glycyl-glycine and L-α-alanyl-L-α-alanine at 25°C

Densities and specific heat capacities of ternary aqueous systems containing dipeptides (glycyl-glycine or L--alanyl-L--alanine) and nucleic acid bases (cytosine or thymine) or their alkyl derivatives (1,3-diethylthymine or caffeine) were determined at 25°C by flow calorimetry and flow densimetry. The partial molar volumes and heat capacities of transfer at infinite dilution of the different nucleic acid bases from water to water+dipeptide solutions were obtained therefrom. Except for the case of the transfer of cytosine to aqueous glycyl-glycine solutions where a small positive dependence of the transfer quantities was observed with the dipeptide concentration, the values of the heat capacities of transfer were in general low, positive or negative, depending on the compensation of hydrophobic-hydrophilic interactions between the dipeptide and the base. The volumes of transfer of most of the bases are very small, within the limit of the experimental error.     

The distribution of the likelihood ratio for mixtures of densities from the one-parameter exponential family

We here consider testing the hypothesis ofhomogeneity against the alternative of a two-component mixture of densities. The paper focuses on the asymptotic null distribution of 2 log _n , where _n is the likelihood ratio statistic. The main result, obtained by simulation, is that its limiting distribution appears pivotal (in the sense of constant percentiles over the unknown parameter), but model specific (differs if the model is changed from Poisson to normal, say), and is not at all well approximated by the conventional ₍₂₎ ² -distribution obtained by counting parameters. In Section 3, the binomial with sample size parameter 2 is considered. Via a simple geometric characterization the case for which the likelihood ratio is 1 can easily be identified and the corresponding probability is found. Closed form expressions for the likelihood ratio _n are possible and the asymptotic distribution of 2 log _n is shown to be the mixture giving equal weights to the one point distribution with all its mass equal to zero and the ²-distribution with 1 degree of freedom. A similar result is reached in Section 4 for the Poisson with a small parameter value (0.1), although the geometric characterization is different. In Section 5 we consider the Poisson case in full generality. There is still a positive asymptotic probability that the likelihood ratio is 1. The upper precentiles of the null distribution of 2 log _n are found by simulation for various populations and shown to be nearly independent of the population parameter, and approximately equal to the (1–2)100 percentiles of ₍₁₎ ² . In Sections 6 and 7, we close with a study of two continuous densities, theexponential and thenormal with known variance. In these models the asymptotic distribution of 2 log _n is pivotal. Selected (1–) 100 percentiles are presented and shown to differ between the two models.     

Chapter 15 DEA/AR analysis of the 1988–1989 performance of the Nanjing textiles corporation

This article employs new data envelopment analysis/assurance region (DEA/AR) methods to evaluate the efficiency of the 35 textile factories of the Nanjing Textiles Corporation (NTC), Nanjing, China. The returns to scale (RTS) of these factories were studied without assuming that the optimal DEA solutions were unique. All DMUs are identified with pointsE (Extreme Efficient),E (Efficient but not an extreme point) andF (Frontier but not efficient). We then further identify the nonfrontier DMUs with pointsNE, NE andNF according to whether they are projected onto a point inE, E, orF en route to evaluating their performances. All of the inefficient factories were in classNF and had unique optimal primal-dual solution pairs. Consequently, the solution pairs satisfy the strong complementary slackness condition (SCSC). Application of cone-ratio (CR) ARs reduced significantly the number of factories in classE, and showed that some AR-efficient factories were more flexible in adopting the mixture of central planning and market economies that China currently is trying to use. Also, linked-cone (LC) ARs were applied to measure maximum and minimum profit ratios. The SCSC multiplier space approach was utilized to analyze the sensitivity of the efficiency results to potential errors in the data with and without ARs. The results in this article suggest that collective units had a better performance than state-owned units in the two consecutive years analyzed.This paper was written while the author was at the School of Economics and Management, Southeast University, Nanjing 210018, P.R. China.     

Determination of thermodynamic functions of sorption for cyclohexyl-, piperidyl-, morpholyl-, and thiomorpholyl-n-alkanes by capillary gas-liquid chromatography

The values of partial molar free energy (G), enthalpy (H), and entropy (S) of sorption in the homologous series ofN-alkylpiperidines,N-alkylmorpholines,N-alkyl thiomorpholines, and alkylcyclohexanes were determined. It was found that the free energy of sorption is determined to a greater extent by the enthalpy term than by the entropy one. The free energy of sorption of the first homolog decreases when then-alkyl chain is attached directly to the carbon atom of the cycle and increases in the case ofN-alkylsubstituted heterocycles. The influence of the heteroatom nature on intermolecular interactions of homologs with the nonpolar stationary phase was quantitatively estimated on the basis of thermodynamic data.Dead time necessary for calculation of the retention factor was determined by the retention of methane injected into the column simultaneously with the sample.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2030–2032, August, 1996.