Synthesis and complexing properties of a double-calix[4]arene crown ether

The template synthesis of copper(II) phthalocyanine by the condensation of dicyanobenzene within the supercages of Cu(II) exchanged X and Y type zeolites was studied using differential scanning calorimetry. The exotherms for intrazeolite and surface complexation have been resolved. These thermal events exhibit a dependence on the copper loading and hydration level which has been interpreted as a pressure effect.     

溶剂蒸气对聚对苯二甲酸乙二酯作用的差示扫描量热研究

用差示扫描量热(DSC)研究了几种有机溶剂蒸气对聚对苯二甲酸乙二酯(PET)的作用,表明可分为反应性的和非反应性的两种。同时,对于非反应性的作用,依冷结晶峰面积的变化,又可分为三种类型:冷结晶峰面积不变,经诱导期后下降,无诱导期而迅速下降。双冷结晶峰现象在一些非反应性溶剂处理过的PET试样的DSC曲线也观察到。     

[Ni(NH_2NHCO_2CN_3)_3](NO_3)_2·H_2O的制备、具体结构和热分解机理

由硝酸镍水溶液和肼基甲酸甲酯（NH_2NHCOOCH_3, MCZ）的水溶液反应,制备 出未见文献报道的配合物[Ni(MCZ)_3]-(NO_3)_2·H_2O。晶体结构测定结果表明, 该晶体属单斜晶系,P2_1/n空间群,晶体学参数为：a = 1.3681 (2) nm,b = 0. 8188 (1) nm,c = 1.6029 (4) nm,β = 92.16 (2)°,V = 1.7943 (6) nm~3, D_c = 1.744 g·cm~(-3),Z = 4,F(000) = 976,μ(Mo Kα) = 1.166 mm~(-1) 。结构采用全矩阵最小二乘法优化,除氢原子采用各向同性热参数外,其它非氢原 子均采用各向异性热参数修正,最终偏离因子R_1 = 0.0337,wR_2 = 0.0857。在 该配合物分子中,肼基甲酸甲酯作为双齿配体,由羰基氧原子和端基氮原子与Ni~ (2+)配位,形成五元平面螯合环,配合物分子中共有三个这样的螯合环,中心离子 为六配位八面体构型。配合物的外界是两个硝酸根离子和一个水分子,通过库仑力 和氢键与内界结合在一起。采用TG-DTG,DSC,IR等表征了标量化合物的热稳定性 。在程序升温条件下,该配合物的热分解过程是由一个弱的吸气热过程和三个较强 的连续的放热过程组成的,由TG-DTG和IR分析结果证明,在325 ℃时的最终分解产 物为NiO,得到了化合物的分解机理。     

Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

丁酸壳聚糖液晶的临界行为研究

用偏光显微镜法测定了丁酸壳聚糖在四种酸性溶剂中的临界浓度值．发现临界浓度值（ｖ／ｖ％）与溶剂的酸性无关，都是１６％～１７％．在以二氯乙酸为溶剂时，不同丁酰化程度的丁酸壳聚糖有相同的临界浓度．用ＤＳＣ法测定了丁酸壳聚糖／二氯乙酸体系的临界温度，并绘制了相图．结果表明，浓度达６０％（ｗ／ｗ％）后，临界温度基本不再变化，稳定在３９℃左右．     

Amorphous phase evolution during crystallization of poly(ethylene-terephthalate)

Crystallization of poly(ethylene terephthalate) from the amorphous state has been studied in the temperature range 90°–120°C to characterize the amorphous phase when crystalline microstructure is developing. Small-angle x-ray scattering, scanning electron microscopy, and density measurements were used to investigate the morphology of semi-crystalline materials. Differential scanning calorimetry and dynamical mechanical spectroscopy experiments were carried out on amorphous, partially crystallized and crystallized specimens and, when structural relaxation is allowed (thermal treatments close to but below glass transition temperature), strong evidence is obtained for the existence of two different amorphous phases with different mobilities.     

Total luminescence intensity (TLI) offers superior early oxidation detection in unstabilised polyethylene but is no better than FT-IR for stabilised polyolefins

In an earlier study, we have shown that chemiluminescence (CL) and the total luminescence intensity (TLI) method are highly sensitive to oxidation in degradable PE. In this study, stabilised PE and PP were characterised with CL in an inert (TLI) and in an oxygen atmosphere (CL-OIT) and the results were compared to those obtained by the commonly used techniques, FT-IR (carbonyl index (CI)) and thermal analysis (DSC-OIT). PE was aged at a low temperature (80 °C) and PP was aged at temperatures between 60 and 120 °C. Non-Arrhenius behaviour was observed in the oxidation of PP. This showed the importance of aging at a low temperature to obtain realistic results. TLI and CI of stabilised PP and most of the stabilised PE gave comparable results with the same sensitivity for oxidation detection. This was in contrast to our previous results for degradable PE. However, TLI of unstabilised PE showed earlier oxidation detection than CI, which agreed with our earlier results. TLI of PE had a higher sensitivity than CL-OIT, and both TLI and CI of PP were sufficiently sensitive to detect the effect of aging at different temperatures, whereas DSC-OIT was not.     

Preformulation compatibility studies of etamsylate and fluconazole drugs with lactose by DSC

Chemical compatibility of two drugs, namely, etamsylate and fluconazole was studied with lactose as excipient, employing differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques. The DSC patterns recorded for the mixtures of both the drugs with the common excipient (lactose) indicated that fluconazole as well as etamsylate were incompatible with lactose at high temperatures. X-ray diffraction patterns recorded for pure drugs and lactose and the mixtures of individual drugs with lactose prepared at room temperature by intimate grinding of the components revealed incompatibility of both the drugs with lactose also at room temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hydration behaviour of a lime-pozzolan cement containing MSW incinerator fly ash

A lime-pozzolan cement was used to make pastes containing different quantities of MSW fly ash. After setting, the pastes were cured in water at room temperature from 1 h to 260 days. The hydration characteristics and the nature of the hydration products of the various pastes were studied by simultaneous TG/DSC thermal analysis and X-ray diffractometry. The MSW fly ash was found to induce a slowing of the hydration process in lime-pozzolan pastes, and after some days an evident acceleration of hydration reactions occurred. Sulphate and chloride in the MSW fly ash yield hydration products forming a cementitious matrix.The author is grateful to D. Calabrese for assistance with the thermal and XRD analyses.