Determination of kinetic parameters of polymerizations by differential scanning calorimetry

Differential scanning calorimetry is well suited to record heat productions of chemical and physical processes as data for the following kinetic analysis. To obtain kinetic parameters of complex reactions, nonlinear optimization methods have to be used. Such complex reaction systems are polymerizations. We tried to evaluate measurements of the epoxy cure and the polymerization of β-propiolactame with simple and complex models. In both cases the simple models did not produce satisfactory results. But by using complex models a successful fitting of the measured data was possible. Our investigation shows that the combination of DSC and modern nonlinear evaluation methods presents a suitable tool for the kinetic investigation of polymerizations.     

Thermoanalytical methods in the study of inorganic thin films

Thermoanalytical (TA) methods are relatively seldom applied for assessing the physical and chemical proeprties of thin films, but they can be used in studies of composition, phase transitions and film—substrate interactions. In the present paper the possibilities of TA methods in thin film studies are reviewed. The thermoanalytical methods considered are the classical TG and DTA/DSC methods but some complementary methods will also be briefly mentioned. The main emphasis is given to true thin films. Details of sample preparation are also given. An important application of TA methods is characterization of precursors for the CVD growth of thin films, and this is also discussed.     

Thermal investigation of PEG 4000 — oxazepam binary system

A thermal study using DSC and Hot Stage Microscopy (HSM) was carried out to investigate the interaction in solid state of the binary system PEG 4000 — oxazepam, and to establish their phase diagram. The eutectic composition, which melting occurs at lower temperature as compared with the pure components, has been determined. The results obtained by DSC and HSM have indicated that PEG 4000 — oxazepam mixtures displays no obvious incompatibilities, and that the system shows a typical eutectic behaviour. However because of the closeness of the melting of PEG 4000 to the eutectic temperature, it was difficult to determine precisely the eutectic composition and temperature on the basis of DSC measurements alone. The use of heats of fusion corresponding to physical mixtures allowed an estimation of the eutectic composition at 6% w/w oxazepam. Additional information of temperature (57.6C) and composition (5–10% w/w oxazepam) of the eutectic was obtained by HSM using the contact method. This low melting temperature in this range of compositions offers advantages in terms of drug stability and easy manufacture.     

Thermal degradation behavior of radiation synthesized polydiallyldimethylammonium chloride

Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) studies were carried out on gamma radiation synthesized polydiallyldimethylammonium chloride (PDADMAC). The polymer was found to undergo thermal degradation in two stages. The first stage showed a weight loss of 33% and the second stage showed a weight loss of 67%. The DSC thermogram shows two endothermic peaks corresponding to the two stages in the TG thermogram and the experimental enthalpy change associated with the first and second stages were 650 J g⁻¹ and 129.5 J g⁻¹, respectively. The nth-order kinetic parameters (order of the reaction, activation energy and the pre-exponential factor) were determined from a single dynamic DSC or thermogravimetric (TG) thermogram by the method of least square. Theoretical TG/differential thermogravimetric (DTG) and DSC thermograms derived from the calculated kinetic parameters were in good agreement with the experimental ones at the heating rate employed. However, the kinetic parameters determined using TG and DSC were different. This leads to the conclusion that the degradation mechanism could be complicated and may consists of a number of parallel or consecutive reactions. The glass transition temperature (T_g) of the polymer was found to be around 150 °C depending on the test method employed.     

DSC,FT-IR and NIR with Chemometric Assessment Using PCA and HCA for Estimation of the Chemical Stability of Oral Antidiabetic Drug Linagliptin in the Presence of Pharmaceutical Excipients

Pharmaceutical excipients should not interact with active substances, however, in practice, they sometimes do it, affecting the efficacy, stability and safety of drugs. Thus, interactions between active substances and excipients are not desirable. For this reason, two component mixtures of oral antidiabetic drug linagliptin (LINA) with four excipients of different reactivity, i.e., lactose (LAC), mannitol (MAN), magnesium stearate (MGS) and polyvinylpyrrolidone (PVP), were prepared in a solid state. A high temperature and a high humidity of 60 °C and 70% RH, respectively, were applied as stressors in order to accelerate the potential interactions between LINA and excipients. Differential scanning calorimetry (DSC) as well as Fourier transform infrared (FT-IR) and near infrared (NIR) spectroscopy were used to estimate the changes due to potential interactions. In addition, chemometric computation of the data with principal component analysis (PCA) and hierarchical cluster analysis (HCA) was applied to adequately interpret the findings. Of the excipients used in the present experiment, all of them were not inert in relation to LINA. Some of the interactions were shown without any stressing, whereas others were observed under high-temperature/high-humidity conditions. Thus, it could be concluded that selection of appropriate excipients for LINA is very important question to minimize its degradation, especially when new types of formulations with LINA are being developed and manufactured.     

Radiation damage by soft β-particles self-irradiation of β-tritiated polystyrene

The effect of self-irradiation of β-tritiated polystyrene under high vacuum at 25°C was studied, and simultaneous random chain scission and cross-linking were observed. Analyses of the gaseous products and the colored polymer residue showed that hydrogen was the only volatile product, while spectroscopic measurements indicated that the coloration was associated with the presence of main-chain double bonds.

G values for hydrogen formation GH₂, cross-linking, G _XL and chain scission, G _CS were obtained as follows: GH₂=0.031; G _CS=0.044; G _XL=0.061. Possible mechanisms of radiation damage are discussed.     

Gaussian,non-Gaussian critical fluctuations in the Curie-Weiss model

It is known that at the critical temperature the Curie-Weiss mean-field model has non-Gaussian fluctuations and that internal fluctuations can be Gaussian. Here we compute the distribution of theq-mode magnetization fluctuations as a function of the temperature, the wave vectorq, and a fading out external field. We obtain new classes of probability distributions generated by this external field as well as new critical behavior in terms of its rate of fading out. We discuss also the susceptibility as the limitq tending to zero.     

Crystallinity and dielectric relaxations in semi-crystalline poly(ether ether ketone)

The Maxwell-Wagner-Sillars (MWS) relaxation is studied for semi-crystalline polymers poly (ether ether ketone) (PEEK), in the range 20 Hz-1 MHz and temperature varying from 80 to 330 °C. The parameter is the crystallization condition in the case of PEEK, which is a semi-crystalline polymer considered as a particulate composite. The relaxation found in the semi-crystalline polymers above the α relaxation of the PEEK is ascribed to the trapping of conductive carriers at the interface between crystalline lamellae and the amorphous matrix. The study of PEEK microstructure is based on differential calorimetry and X-rays diffraction. Two lamellae populations have been detected, that depends on the crystallization temperature and its duration. The crystallinity rate is increasing with crystallization temperature and duration. In dielectric studies, the use of the electric modulus instead of permittivity allows us to minimize the ionic conduction and then leads to the appearance of the interfacial relaxation. According to our measurements, the crystallinity rate is not the main factor of the interfacial relaxation intensity, which also depends on the nature and degree of perfection of the lamellae.     

Crystal structure and thermal behavior of two new organic monosulfates NH3(CH2)5NH3SO4 1.5H2O and NH3(CH2)9NH3SO4 H2O

The chemical preparation, the calorimetric studies and the crystal structure are given for two new organic sulfates NH₃(CH₂)₅NH₃SO₄ 1.5H₂O (DAP-S) and NH₃(CH₂)₉NH₃SO₄·H₂O (DAN-S). DAP-S is monoclinic P2₁/n with unit cell dimensions: a=11.9330(2) Å; b=10.9290(2) Å; c=17.5260(2) Å; β=101.873(1)°; V=2236.77(6) Å³; and Z=8. Its atomic arrangement is described as inorganic layers of units and water molecules separated by organic chains. DAN-S is monoclinic P2₁/c with unit cell parameters: a=5.768(2) Å; b=25.890(10) Å; c=11.177(5) Å; β=115.70(4)°; V=1504.0(11) Å³ and Z=4. Its structure exhibits infinite chains, parallel to the [100] direction where the organic cations are interconnected. In both structures a network of strong and weak hydrogen bonds connects the different components in the building of the crystal.     

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

A twin optically-pumped far-infrared CH₃OH laser has been constructed for use in plasma diagnostics. The antisymmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 m. With the 118.8-m line, it is obtained from the frequency separation of the anti-symmetric doublet that CH₃OH absorption line center is 16±1 MHz higher than the pump 9.7-m P(36) CO₂ laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described.This work was carried out under the collaborating research program at the Institute of Plasma Physics, Nagoya University, Nagoya 464, Japan.