Preparation of octadecyl modified column gels using heat-treated silicas and their retention behaviour in high-performance liquid chromatography

Summary The effect of silanol groups on three types of octadecylmodified column gels using heat-treated silicas by calcination has been studied by high-performance liquid chromatography. After heat-treating at 180°C, 500°C and 950°C, the silicas treated with octadecyldimethylchlorosilane were used for the measurement of physical and chemical analysis. From elemental carbon analysis data, the reactive silanol group concentrations, _OH(s), were determined to be 2.0 in the 180°C treated silica, 2.1 in the 500°C treated silica and 1.6 in the 950°C treated silica, respectively (original silica: mean pore diameter 116 Å, specific surface area 298 m²/g, pore volume 1.22 ml/g, particle size 5.0 m). The separation factors, , of pyridine versus phenol were measured to be 0.79 on 180°C treated silica, 0.91 on 500°C treated silica and 1.98 on 950°C treated silica, using acetonitrile-water mixtures as the eluent. And then, on the basis of the physico-chemical and chromatographic data, the three types of octadecyl modified column gels using heat-treated silicas by calcination have been compared.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Improved detection of multi-phosphorylated peptides in the presence of phosphoric acid in liquid chromatography/mass spectrometry

In contrast to lower phosphorylation states (e.g. the tryptic monophosphopeptide FQpSEEQQQTEDELQDK from bovine beta-casein), the specific detection of multi-phosphorylated peptides (e.g. the tetraphosphopeptide RELEELNVPGEIVEpSLpSpSpSEESITR from tryptic digestion of bovine beta-casein) has often been problematic for liquid chromatographic mass spectrometric (LC/MS) analysis owing to their high affinity for adsorption to exposed surfaces. We observed an enhancement in the overall detection of phosphopeptides on addition of phosphoric acid (0.1-1.0%) to the sample solution; a 10-fold increase in sensitivity was determined for the detection of two tryptic phosphopeptides and also a significant improvement in the detection of the tetraphosphopeptide. Using capillary LC with ion trap tandem MS for detection and identification, the achievable detection limits were 50 fmol and 50 pmol for the monophosphopeptide and the tetraphosphopeptide, respectively. Phosphoric acid is believed to act as a blocking agent to available silanol groups on both the silica capillary surface and the C(18)-bonded stationary phase silica surface.     

Olefin metathesis in room temperature ionic liquids using imidazolium-tagged ruthenium complexes

New recyclable imidazolium-tagged ruthenium catalysts have been developed to perform olefin metathesis in room temperature ionic liquids (RTILs). High level of recyclability combined with a high reactivity were obtained in the ring-closing metathesis (RCM) of a variety of di- or tri-substituted and/or oxygen-containing dienes. Extremely low residual ruthenium levels were detected in the RCM products (average of 7.3 ppm per run). Several examples of olefin cross-metathesis (CM) have been also studied.     

Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.     

Determination of the enantiomeric composition of chiral carboxylic acids using chiral derivatization and HPLC

Summary The enantiomers of chiral carboxylic acids were separated as their diastereomeric amides with (1R,2R)-(−)-1-(4-nitrophenyl)-2-amino-1,3-propanediol (“levobase”) and with “dextrobase” (the enantiomer of levobase) by high-performance liquid chromatography using a conventional C-18 column and various solvent systems containing acetonitrile, methanol, water, and phosphoric acid.     

LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

Dominant Factors Affecting the Chromatographic Behaviour of Bile Acids

With the aim of optimizing the chromatographic process by avoiding any preliminary derivatizing step, we examined the chromatographic behaviour of a selected set of unconjugated bile acids looking at the dominant factors that affect the performances of three different stationary phases: RP-8, RP-18 and RP-18 Base Deactivated (RP-18-BD). Accordingly to its structural peculiarity, the RP-18-BD column combined with a specific mobile phase has proved to be the most suitable one, in enhancing both separation factor α and resolution R _S within the selected set of analytes. Pronounced changes in the chromatographic profiles by only slightly changing the mobile phase composition (pH, buffer concentration, percentage and kind of organic modifier) prompted us to achieve satisfactory results in the separation and resolution of the selected set of bile acids.Presented at: CE in the Biotechnology & Pharmaceutical Industries: 7th symposium on the practical applications for the analysis of proteins, nucleotides and small molecules, Montreal, Canada, August 12–16, 2005.An erratum to this article can be found at     

Supramolecular framework adducts constructed of hexamethylenetetramine,aquated alkali metal cationic clusters,and hexacyanoferrates(II/III)

The reaction of alkali metal hexacyanoferrate(II/III) with (CH₂)₆N₄ (hexamethylenetetramine, abbreviated HMT) in an acidic medium yielded crystalline compounds of stoichiometries HK₂[Fe¹¹¹(CN)₆]·2HMT·4H₂O, H₂K₂[Fe¹¹(CN)₆]·2HMT·4H₂O, and HNa₂[Fe¹¹¹(CN)₆]· 2HMT·5H₂O. Their crystal structures are based on a packing of three molecular components: neutral and/orprotonated HMT, hexacyanoferrate, and an alkali metal ion-water cluster. The resulting three-dimensional supramolecular framework is constructed from the coordination of the alkali metal ion by aqua ligands as well as [Fe(CN)₆]{n–} and HMT units, and further stabilization is achieved by hydrogen bonding between water molecules and the noncoordinated nitrogen atoms of HMT and hexacyanoferrate.     

Comparative study on separation of diastereomers by HPLC

Summary Reversed (RP-HPLC) and normal phase chromatographic (NP-HPLC) separations have been developed for diastereomers ofN-acyl-1-methyl-1,2,3,4-tetrahydo-β-carbolines which are acylated derivatives of simple natural β-carboline alkaloids. Separations of derivatives having different acyl moieties in theO,O-diacyl-tartaric acid ester subtituent differed remarkably. Little or no resolution in either NP-HPLC or RP-HPLC could be achieved with the diacetyl-tartrate derivative. Base-line separation by RP-HPLC but no separation by NP-HPLC was possible with the bulkier and more apolar dipivaloyl derivative. Retention order of the bis-benzoylated diastereomers was reversed and separation time increased dramatically by RP-HPLC. Good separation of the medium polarity, but rigid,N-camphanyl derivative by NP-HPLC has been achieved, whereas RP-HPLC could not be used for separation of these diastereomers. Separability of different diastereomers was highly dependent on polarity and rigidity of the derivatizingN-acyl moieties. Conformational analysis by molecular mechanics and comparison of the lowest energy conformational states of the diastereomers was applied to rationalise separation-retention behaviour of stereoisomers by RP-HPLC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001