超大规模集成电路光学光刻技术的现状与展望

光学光刻是目前超大规模集成电路(VLSI)制备中主要的微米和亚微米的图形加工技术,这一技术将继续保持其主导地位成为90年代VLSI发展的关键。本文综述了近年来光学光刻工艺的发展,主要介绍了G线(436nm)、Ⅰ线(365nm)和准分子激光光刻的现状,并对实现高的光学光刻分辨率所必须解决的透镜设计、套准精度和像场面积等问题作了详细描述。最后展望了发展方向、     

Optimized analysis of the critical behavior in polymer mixtures from Monte Carlo simulations

A complete outline is given for how to determine the critical properties of polymer mixtures with extrapolation methods similar to the Ferrenberg-Swendsen techniques recently devised for spin systems. By measuring not only averages but the whole distribution of the quantities of interest, it is possible to extrapolate the data obtained in only a few simulations nearT _c over the entire critical region, thereby saving at least 90% of the computer time normally needed to locate susceptibility peaks or cumulant intersections and still getting more precise results. A complete picture of the critical properties of polymer mixtures in the thermodynamic limit is then obtained with finite-size scaling functions. Since the amount of information extracted from a simulation in this way is drastically increased as compared to conventional methods, the investigation of mixtures with long chains or built-in asymmetries is now possible. As an example, the critical points, exponents, and amplitudes of dense, symmetric polymer mixtures with chain lengths ranging fromN=16 up toN=256 are determined within the framework of the 3D bond fluctuation model using grand canonical simulation techniques. As an example for an asymmetry, the generalization of the method to asymmetric monomer potentials is briefly discussed.     

Current methods for site-directed structure generation

Summary There has been a rapid growth of interest in techniques for site-directed drug design, fuelled by the increasing availability of structural models of proteins of therapeutic importance, and by studies reported in the literature showing that potent chemical leads can be obtained by these techniques. Structure generation programs offer the prospect of discovering highly original lead structures from novel chemical families. Due to the fact that this technique is more-or-less still in its infancy, there are no case studies available that demonstrate the use of structure generation programs for site-directed drug design. Such programs were first proposed in 1986, and became commercially available in early 1992. They have shown their ability to reproduce, or suggest reasonable alternatives for, ligands in well-defined binding sites. This brief review will discuss the recent advances that have been made in the field of site-directed structure generation.     

Surface tension of talc and talc-chlorite mixtures

It is possible to estimate surface tension of high-energy solids combining the immersion microcalorimetry thermodynamics and Van Oss' model. In this study we have applied this method on talc and talc-chlorite samples in order to obtain thermodynamic values which permit to understand surface properties useful in the industrial applications of these solids. Some talcite samples are preferentially used in specific industrial applications because they are less hydrophobic or more lamellar. This method seems to be reliable to classify the solids and predict some properties.     

Large Sample Properties of Mixture Models with Covariates for Competing Risks

We study the large-sample properties of a class of parametric mixture models with covariates for competing risks. The models allow general distributions for the survival times and incorporate the idea of long-term survivors. Asymptotic results are obtained under a commonly assumed independent censoring mechanism and some modest regularity conditions on the survival distributions. The existence, consistency, and asymptotic normality of maximum likelihood estimators for the parameters of the model are rigorously derived under general sufficient conditions. Specific conditions for particular models can be derived from the general conditions for ready check. In addition, a likelihood-ratio statistic is proposed to test various hypotheses of practical interest, and its asymptotic distribution is provided.     

2-（υ，5，1）设计的非可解区传递自同构群

研究了2-(υ，κ，1)设计的区传递自同构群．特别讨论了2-(υ，5，1)设计的非可解区传递自同构群．得到定理：设G是一个2-(υ，5，1)设计Q的区传递．点本原但非旗传递的自同构群．若G是非可解群．则G的基柱Soc(G)不是典型群PSUn(q)，这里q为奇数，n≥3。     

Optimal shape design for packaging containing heating elements by inverse heat transfer method

The present study is concerned with the determination of the optimal shape for a package containing multiple heating elements. The optimization tool has been developed based on the inverse heat transfer (IHT) approach, incorporating a direct problem solver, a numerical grid generator, a direct-differentiation sensitivity analyzer, and the conjugate gradient method. Shape design that leads to a specified outer surface temperature distribution is predicted by the approach. In this study, the effects of internal heat generation on optimal shapes of the packagings have also been evaluated. Several practical cases with various imbedded heating elements and thermal conditions are studied. Results show that the approach provides an efficient computer-aided design scheme for the shape profile determination.     

用电泳技术制备YBCO高温超导厚膜

介绍了电泳技术制备YBCO高温超导厚膜的实验方法和YBCO高温超导厚膜的电学性质测量 ,讨论了在学生小型科研实验或设计实验中开展此实验的学时安排、注意事项和实验内容的扩展 .     

全光网中基于FBG的OADM设计研究

提出一种全新的OADM(Optical Add—Drop Multiplexers)结构设计，此结构仅采用一个多端口环行器，大大减少了环行器的数量，节约了成本。若要上／下路一个波长．则只需要一个FBG(Fiber Bragg Grating)；若要同时上／下路多个波长，则需要2m个FBG。计算机仿真实验证明此结构比H．Yuan提出的结构具有更低的损耗．对全光网络的实现具有重大的意义。