Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.     

Evaluation of the use of consensus values in proficiency testing programmes

Proficiency testing (PT) is an essential tool used by laboratory accreditation bodies to assess the competency of laboratories. Because of limited resources of PT providers or for other reasons, the assigned reference value used in the calculation of z-score values has usually been derived from some sort of consensus value obtained by central tendency estimators such as the arithmetic mean or robust mean. However, if the assigned reference value deviates significantly from the ‘true value’ of the analyte in the test material, laboratories’ performance will be evaluated incorrectly. This paper evaluates the use of consensus values in proficiency testing programmes using the Monte Carlo simulation technique. The results indicated that the deviation of the assigned value from the true value could be as large as 40%, depending on the parameters of the proficiency testing programmes under investigation such as sample homogeneity, number of participant laboratories, concentration level, method precision and laboratory bias. To study how these parameters affect the degree of discrepancy between the consensus value and the true value, a fractional factorial design was also applied. The findings indicate that the number of participating laboratories and the distribution of laboratory bias were the prime two factors affecting the deviation of the consensus value from the true value.     

MS/MS in structural analysis of an oviposition-deterring pheromone

A recently characterized oviposition-deterring pheromone (ODP, structure 1) of the European cherry fruit fly was used as a test case for probing the potential of tandem mass spectrometry (MS/MS) in structure elucidation as a stand-alone technique. The glycolipid-taurinate 1 was subjected to MS/MS analyses under a variety of conditions with and without preceding chemical degradation. Acidic methanolysis of 1 and subsequent in-batch derivatization (trideuterioacetylation) yielded methyl 2,3,4,6-tetrakis-O-trideuterioacetyl-glucopyranoside (2), methyl 8,15-bis-trideuterioacetoxy-palmitate (3), and taurine (4) as suitable target compounds for direct mixture analysis.Low energy collision induced dissociation (CID) on selected precursor ions (MS/MS on [M + H – CH₃OH]⁺ and [M + H]⁺ produced by fast atom bombardment (FAB)) allowed direct identification of 2 and 4, respectively, by comparison with appropriate reference ions. In the case of 3, low energy CID (desorption chemical ionization (DCI) instead of FAB, MS/MS on [M + H]⁺) permitted deduction of gross molecular structure, but failed to provide positional detail. In sharp contrast,high energy CID of trideuterioacetylated intact 1 (FAB-MS/MS on [M – H]^– ions of la) clearly revealed a linear 8,15-hydroxylated palmitic acid backbone. Less certain was assignment of 15-O-glucosylation by this approach.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).     

多组分多出口稀土串级萃取静态优化设计研究(I)静态设计算法

研究了多组分、多出口稀土串级萃取体系静态优化设计过程的精确计算方法. 首先推导出串级萃取体系最重要的物料平衡和萃取平衡关系, 其次根据分离要求等条件确定了各出口的相对流量, 利用萃取平衡和物料平衡关系进行静态递推, 并在求解过程中根据物料平衡关系引入了校正参数, 通过对递推结果的迭代校正, 最终得到收敛的计算结果, 解决了静态设计算法的关键问题. 这一方法为多组分多出口稀土串级萃取过程的静态优化设计提供了精确算法.     

Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

微型集成化色谱仪

用微制造技术和色谱原理结合，以全新的概念和设计思维研制色谱仪一微型集成化色谱仪。这种仪器的整个色谱部分在基片上制成。集微型进样器，细内径毛细管柱和微型固体检测器于一体，功耗不过几瓦，重不过几百克，而分析速度比现有仪器提高近一个数量级，检测灵敏度可达１０＾－６Ｖ／Ｖ。这种仪器的制作过程类似半导体器件，能大批量，性能高度重复可靠、而成本极为低廉地制造出来，彻底改变传统色谱仪器的生产方式。本文给出这种仪     

From a monomer to a protein-sized, doughnut-shaped coordination oligomer-the influence of side chains of C3-symmetric ligands in supramolecular chemistry

Herein we describe the importance of side chains in C3-symmetric ligands in supramolecular chemistry. The reaction of the new ligand tris(5-bromo-2-methoxybenzylidene)triaminoguanidinium chloride [H3Me3Br3L]Cl (1) with ZnCl2 results in the formation of the monomeric complex (Et3NH)2[(ZnCl2)3Me3Br3L] (2), in which the ligand remains in a conformation less favourable for the coordination of metal centres. The use of the related tris(5-bromo-2-hydroxybenzylidene)triaminoguanidinium chloride, [H6Br3L]Cl, under similar conditions, results in the formation of two different dimeric compounds (NH4)[{[Zn(NH3)]3Br3L}2{mu-(OH)}3]1/4MeOH (3) and [Zn{Zn2(OH2)3(NH3)Br3L}2] (4), depending on the solvent mixture used. The comparable reaction of the ligand tris(5-bromo-2-hydroxy-3-methoxybenzylidene)triaminoguanidinium chloride [H6(OMe)3Br3L]Cl (5), leads to the formation of a doughnut-shaped, protein-sized coordination oligomer (Et3NH)18[{Zn[Zn2Cl{(OMe)3Br3L}]2}6(mu-Cl)6(OH2)6]x CH3CN (6), which comprises six dimeric [Zn5{(OMe)3Br3L}2] units. Whereas 3 and 4 decompose in DMSO solution, 6 is surprisingly stable in the same solvent.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.