FIA-fluorimetric determination of adrenaline in pharmaceutical formulations by oxidation with molecular oxygen

The fluorimetric determination of adrenaline is carried out in a continuous-flow assembly and by means of the molecular dissolved oxygen. The sample solution merges with an NaOH stream, then the resulting mixture is heated at 73 °C and led to the flow-cell of the fluorimeter. The flow-assembly is very simple and the procedure is quick (107 samples h^–1) reproducible (R.S.D. 0.6%), selective and suitable to be applied to determination of adrenaline in formulations. Calibrations graph are linear over the ranges 0.05–15 and 20–40 mgl^–1.     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

Kinetics of the thermal dehydrations and decompositions of some mixed metal oxalates

Both isothermal and programmed temperature experiments have been used to obtain kinetic parameters for the dehydrations and the decompositions in nitrogen of the mixed metal oxalates: FeCu(ox)₂·3H₂O, CoCu(ox)₂·3H₂O and NiCu(ox)₂·3.5H₂O, [ox=C₂O₄]. Results are compared with those reported for the thermal decompositions of the individual metal oxalates, Cuox, Coox·2H₂O, Niox·2H₂O and Feox·2H₂O. X-ray photoelectron spectroscopy (XPS) was also used to examinee the individual and the mixed oxalates. Dehydrations of the mixed oxalates were mainly deceleratory processes with activation energies (80 to 90 kJ·mol⁻¹), similar to those reported for the individual hydrated oxalates. Temperature ranges for dehydration were broadly similar for all the hydrates studied here (130 to 180°C). Decompositions of the mixed oxalates were all complex endothermic processes with no obvious resemblance to the exothermic reaction of Cuox, or the reactions of physical mixtures of the corresponding individual oxalates. The order of decreasing stability, as indicated by the temperature ranges giving comparable decomposition rates, was NiCu(ox)₂>CoCu(ox)₂>FeCu(ox)₂, which also corresponds to the order of increasing covalency of the Cu−O bonds as shown by XPS. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Molecular structure of (diethyldithiocarbomoyl)diphenylthiophosphinate

X-Ray study of (diethyldithiocarbomoyl)diphenylthiophosphinate was carried out. AZ-conformation of the diethyldithiocarbomoyl ligand, which results in a short nonvalent intramolecular P...S contact (3.315 Å), is realized in the molecule. Steric hindrances in the molecule increase the P-S-C bond angle to 106.39°.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1978–1980, October, 1995.The work was financially supported by the International Science Foundation (Gram RH1 000).     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Determination of Lercanidipine Hydrochloride and Its Impurities in Tablets

The reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed for determination of lercanidipine hydrochloride and its synthetic impurities, degradation and oxidative products in Carmen^® tablets. The best separation was performed on Zorbax SB C18 column, 250 x 4.6 mm, particle size 5 m. Acetonitrile-water-triethylamine 55:44.8:0.2 (v/v/v) was used as a mobile phase with flow rate 1 mL min^–1. pH was adjusted to 3.0 with orthophosphoric acid. UV detection was performed at 240 nm. Duration of chromatographic run was about 12 min for six examined compounds. The chromatographic conditions for the determination of lercanidipine hydrochloride and its related substances were the same, but the concentration of lercanidipine hydrochloride was 0.03 mg mL^–1 for assay and 0.3 mg mL^–1 for related substances. The validation of the method performance characteristics (figures of merits, quality of parameters) was established to be adequate for the intended use. The evaluation of number of parameters, such as selectivity, linearity, accuracy, specificity, precision (repetability and reproducibility), sensitivity and detection and determination limits is entailed.Acknowledgements This work was supported by the Institute of Pharmacy of Serbia, Belgrade and by the Ministry for Science, Technology and Development of Serbia, Contact: 1458     

Ion interaction approach to calculations of volumetric properties of aqueous multiple-solute electrolyte solutions

The ion interaction approach developed by Pitzer was used for the prediction of volumetric properties of mixed electrolyte solutions at 25°C based on parameters calculated from experimental data for single-solute electrolyte solutions. Such an approach was shown to be especially effective for application to the calculation of volumetric properties of natural hypersaline brines and of industrial electrolyte solutions of large complexity. The use of the latest recommended sets of volumetric ion interaction parameters for single electrolyte solutions and symmetrical mixing parameters for Na–K–Cl ion combinations considerably improved the precision of the density calculations of highly concentrated mixed electrolyte solutions and of various natural waters.     

Spectrophotometric assay of cephalosporins in pharmaceutical products,using chromotrope 2B and chromotrope 2R

A simple, rapid and sensitive Spectrophotometric method is proposed for the determination of cephadroxil (I), cephalexin (II) and cephradine (III). The method is based on ion-pair complex formation between these derivatives and Chromotrope 2B (C2B) or Chromotrope 2R (C2R), to give a highly coloured radical anion. The coloured products are quantified spectrophotometrically at 542 and 564 nm for C2B and C2R, respectively. The optimization of the experimental conditions is described. The method has been used for the determination of 0.4–15, 0.4–14 and 0.4–18 g/ml of drugs I, II and III, respectively. The accuracy of the method is indicated by the excellent recovery (100.0±1.7%) and the precision is supported by the low relative standard deviations 1.5%. The sensitivity of the method is discussed and the results are compared with the official method. The interference from common degradation products and excipients was also studied. The proposed method was applied successfully to the determination of the different cephalosporins in dosage forms, with good precision and accuracy. The results were compared with those given by the official B.P. 1993 method.     

茶碱抗体的制备及鉴定

茶碱在临床上是一种非常有用的药剂。本文报道一种新的茶碱抗血清的制各及鉴定方法．用混合酸酐法合成抗原，借助于紫外光谱对其进行定性和定量分析。用混合免疫法免疫兔子，用免疫扩散法对抗血清进行鉴定。     

Thin-layer adsorption chromatography with mixed mobile phases. 4. Extension of Ościk's equation to heterogeneous adsorbents

In this paper the equation for thin-layer adsorption chromatography with multicomponent mobile phases, proposed by O?cik in 1965 is extended to energetically heterogeneous solid surfaces. Other forms of this equation, more convenient in practical applications, are presented. Model calculations are made for TLC with binary mobile phases according to the modified form of O?cik's equation. Finally, this equation is compared with that of Snyder.