An Improved Synthesis of Retinoic Acid from β-Ionone

A convenient and large-scale preparation of retinoic acid 1 from β-ionone in five steps with 38% overall yield is described.The key steps are the epoxidization of 2 with a new methylated agent and the condensation 4 with tetraethyl methylenediphophonate in one-pot procedure to prepare 6.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

Effect of genesis on the properties and hydrogen reducibility of NiO-ZnO mixed oxides

The physico-chemical properties and reactivity tested by hydrogen reduction have been studied for two series of NiO-ZnO mixed oxides of various composition. The solid nickel oxide or zinc oxide in interaction with the solution of nitrate of the second component were used as the precursors in each series. The differences in some physico-chemical parameters of the samples in both series were correlated with their reduction behaviour, followed both in iso- and non-isothermal regime. Moreower, the influence of various factors modifying the reactivity of mixed oxides was also investigated and the results were compared with those obtained from earlier studied analogous systems of quite different origin.This revised version was published online in November 2005 with corrections to the Cover Date.     

New Branch-and-Cut Algorithm for Bilevel Linear Programming

Linear mixed 0–1 integer programming problems may be reformulated as equivalent continuous bilevel linear programming (BLP) problems. We exploit these equivalences to transpose the concept of mixed 0–1 Gomory cuts to BLP. The first phase of our new algorithm generates Gomory-like cuts. The second phase consists of a branch-and-bound procedure to ensure finite termination with a global optimal solution. Different features of the algorithm, in particular, the cut selection and branching criteria are studied in details. We propose also a set of algorithmic tests and procedures to improve the method. Finally, we illustrate the performance through numerical experiments. Our algorithm outperforms pure branch-and-bound when tested on a series of randomly generated problems. Work of the authors was partially supported by FCAR, MITACS and NSERC grants.     

The role of variable surface charge and surface complexation in the adsorption of humic acid on magnetite

The ionic strength dependence of humic acid (HA) adsorption on magnetite (Fe₃O₄) was investigated at pH 5, 8 and 9, where variable charged magnetite is positive, neutral and negative, respectively. The adsorption studies revealed that HA has high affinity to magnetite surface especially at lower pH, where interacting partners have opposite charges. However, in spite of electrostatic repulsion at pH 9 notable amounts of humate are adsorbed. Increasing ionic strength enhances HA adsorption at each pH due to charge screening. The dominant interaction is probably a ligand-exchange reaction, nevertheless the Coulombic contribution to the organic matter accumulation on oxide surface is also significant under acidic condition. The results from size exclusion chromatography demonstrate that the smaller size HA fractions enriched with functional groups are adsorbed preferentially on the surface of magnetite at pH 8 in dilute NaCl solution.     

An efficient palladium catalyzed synthesis of 2-arylbenzothiazoles

A novel and convergent palladium catalyzed synthesis of 2-arylbenzothiazoles has been investigated. The key step in the synthesis is a Suzuki biaryl coupling of 2-bromobenzothiazole with aryl boronic acids to provide a variety of 2-arylbenzothiazole derivatives in good yield. The synthetic utility of this methodology is demonstrated by the synthesis of 2-(4-aminophenyl)-6-methoxybenzothiazole, a PET probe precursor for the in vivo imaging of Alzheimer's disease.     

副品红共振光散射法测定脱氧核糖核酸

本文基于脱氧核糖核酸 (DNA)对有机染料副品红的共振光散射的增强效应 ,拟定了一种测定DNA的共振光散射法。在pH =0 5～ 1 5范围内 ,有机染料副品红于 35 5nm处的共振光散射强度被DNA强烈增强 ,且增强程度与DNA浓度呈线性关系 ,线性范围为 0 10～ 15 μg·mL- 1 ,检出限可达 36ng·mL- 1 。该方法简便、快速、具有较高的灵敏度和准确度 ,且线性范围较宽。将该方法用于混合样品中DNA的测定 ,结果令人满意。     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

Physicochemical studies on hydrophobic PEO‐PPO‐PEO triblock copolymer micelles in SDS micellar environment

The shape, size, aggregation, hydration, and correlation times of water insoluble PEO‐PPO‐PEO triblock copolymer micelles with sodium dodecylsulfate (SDS) micelles were investigated using transport studies and dynamic light scattering technique. From the conductance of micellar solutions of the polymer in 25 mM SDS and 5 mM NaCl, the hydration of polymer micelles were determined using the principle of obstruction of electrolyte migration by the polymer. The asymmetry of the micellar particles of polymer and polymer‐SDS mixed micellar systems in 5 mM NaCl and their average axial ratios were calculated using intrinsic viscosity and hydration data obeying Simha–Einstein equation. Hydration number and micellar sizes were variable with temperature. The shape of the polymer micelles has been ellipsoidal rather than spherical. The micellar volume, hydrodynamic radius, radius of gyration, diffusional coefficients as well as translational, rotational and effective correlation times have been calculated from the absolute values of the axes. The partial molal volume of polymer micelles has also been determined and its comparison with the molar volume of pure polymer suggested a volume contraction due to immobilization of the water phase by the hydrophilic head groups of the polymer. The thermodynamic activation parameters for viscous flow favor a more ordered water structure around polymer micelles at higher temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2410–2420, 2007     

Theory of Valuations on Manifolds: A Survey

This is a non-technical survey of a recent theory of valuations on manifolds constructed in [A10], [A11], [AF] and [A12], and actually a guide to this series of articles. We also review some recent related results obtained by a number of people. Received: February 2006, Revision: June 2006, Accepted: June 2006