线性扫描极谱法测定微量肉桂酸

在 1mol·L-1HOAc NaOAc介质中 (pH =3.6 ) ,肉桂酸有一还原峰 ,其峰电位为 - 1.4 7V(vs.SCE)。峰电流与肉桂酸浓度在 2 .0× 10 -5～ 8.0× 10 -4 mol·L-1之间呈线性关系 (r =0 .9989) ,检出限为 1.0× 10 -5mol·L-1。该法应用于肉桂酸含量的测定 ,结果满意 ,并对肉桂酸的电化学性质进行了研究     

高纯度植酸的制备

高纯度植酸的制备孙定光胡佩廖显威（四川师范大学化学系成都６１００６６）关键词植酸制备高纯试剂中图分类号Ｏ６２９．９植酸（ＰｈｙｔｉｃＡｃｉｄ）又名肌醇六磷酸酯，分子式：Ｃ６Ｈ１８Ｏ２４Ｐ６，结构为植酸是中等强度的有机酸，因其结构特殊，具极强的螯合作用...     

Synthesis of novel proline-thiazole based cyclic hexa- and octapeptides

Novel proline-thiazole based cyclopeptides were produced by cyclooligomerisation of an L-proline thiazole amino acid HCl in the presence of pentafluorophenyl diphenylphosphinate (FDPP) or diphenyl phosphorazidate (DPPA).     

4,5-咪唑双酰腙的合成与表征

以酒石酸为原料，经成环制酸、酯化、肼解、与芳香醛缩合，制备了7个4，5－咪唑双酰腙，并用元素分析，IR，^1H NMR,^13C NMR对它们的结构进行了表征。实验结果表明，酰肼与芳香醛在冰醋酸中进行缩合酰腙化一步，具有反应快速、产率高、条件温和、操作简便等优点。     

极谱杂多酸吸附波测定合金中硅

在pH2—4的盐酸介质中,硅(Ⅳ)、锑(Ⅲ)与铝(Ⅵ)形成三元杂多酸,此三元杂多酸在0.4mol/L的HCl中能迅速在滴汞电极上还原而产生灵敏的极谱电流。其峰电位为-0.30V(vs.SCE)。测定下限是8×10~(-8)mol/L。     

Microwave-assisted arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids

The palladium-catalyzed arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids was studied under controlled microwave irradiation conditions. A variety of different catalysts, bases, and solvents were explored in order to achieve optimum yields in the shortest possible reaction times. The best isolated yields were obtained using Pd₂(dba)₃·CHCl₃/PPh₃ as the catalytic system, potassium phosphate monohydrate as the base, and toluene/H₂O as a solvent system. Microwave irradiation using 5 mol % of the palladium catalyst for 90 s (max. temp 170 °C) generally afforded the cross-coupling products in good to excellent yields.     

3-芳基-2-丙酮酸的烯醇结构及Clemmensen还原反应机理

本文用^1H NMR谱研究了3-芳基丙酮酸的烯醇式结构及推测其Clemmensen还原反应机理。     

对环氧化反应具有高催化活性的钛硅介孔分子筛的制备

 使用短链二元羧酸（包括草酸、戊二酸、柠檬酸和酒石酸）为模板剂，采用溶胶－凝胶法合成了具有大比表面积，孔径在3～7nm的钛硅介孔分子筛．EDX和紫外可见漫反射光谱的研究结果表明，所合成的钛硅介孔分子筛中钛的分布均匀，钛物种以孤立态四面体构型为主．本方法所合成的钛硅介孔分子筛对环己烯环氧化反应具有很高的催化活性和选择性．     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.