Mucoadhesive and elastic films based on blends of chitosan and hydroxyethylcellulose

Mucoadhesive polymeric films have been prepared based on blends of chitosan and hydroxyethylcellulose. The blends have been characterized by IR spectroscopy, DSC, WAXD, TGA, SEM, and mechanical testing. It is demonstrated that the mechanical properties of chitosan are improved significantly upon blending with hydroxyethylcellulose. An increase in hydroxyethylcellulose content in the blends makes the materials more elastic. The thermal treatment of the blends at 100 degrees C leads to partial cross-linking of the polymers and formation of water-insoluble but swellable materials. The adhesion of the films towards porcine buccal mucosa decreases with increasing hydroxyethylcellulose content in the blends.     

Miscibility and Isothermal Crystallization Behavior of Poly (Butylene Succinate-co-Adipate) (PBSA)/Poly (Trimethylene Carbonate) (PTMC) Blends

Poly(butylene succinate-co-adipate) (PBSA)/poly (trimethylene carbonate) (PTMC) blend samples with different weight ratios were prepared by solution blending. The morphologies after isothermal crystallization and in the melt were observed by optical microscopy (OM). Differential scanning calorimetry (DSC) was used to characterize the isothermal crystallization kinetics and melting behaviors. According to the OM image before and after melting, it was found that the blends formed heterogenous morphologies. When the PTMC content was low (20%), PBSA formed the continuous phase, while when the PTMC contents was high (40%), PBSA formed the dispersed phase. The glass transition temperatures (T_g) of the blends were determined by DSC and the differences of the T_g values were smaller than the difference between those of pure PBSA and PTMC. In addition, the equilibrium melting points were depressed in the blends. According to these results, the PBSA/PTMC blends were determined as being partially miscible blends. The crystallization kinetics was investigated according to the Avrami equation. It was found that the incorporation of PTMC did not change the crystallization mechanism of PBSA. However, the crystallization rate decreased with the increase of PTMC contents. The change of crystallization kinetics is related with the existences of amorphous PTMC, the partial miscibility between PLLA and PTMC, and the changes of phase structures.     

Synthesis of styrene–acrylonitrile random copolymers (SAN) and polyarylate block copolymers and the control of their mechanical properties by morphology generation

The idea of repulsion in random copolymers was applied to the miscibility modification between polystyrene (PS) and polyarylate (PAr) segments of PS–PAr block copolymer (PAr–PS–PAr). Acrylonitrile (AN), which has a large positive interaction parameter against styrene, was used as a miscibility modifier toward PAr segments. AN was introduced into the carboxyl terminated telechelic‐PS at AN wt % ranging from 12 to 37 wt %. Based on these telechelic acrylonitrile–styrene random copolymers (SAN_x's where x represents AN wt %), SAN_x and PAr block copolymers (PAr–SAN_x–PAr's) were synthesized. The miscibility of SAN_x and PAr segments was estimated from the results of DSC with Fox's equation and spin–spin relaxation time measured by pulsed NMR. These results evidenced that the miscibility between PS and PAr segments can be modified by introducing AN into PS segments. The estimated volume fraction of the interfacial layer between SAN_x and PAr segments was increased as x was increased toward 24 wt %, around which the predicted miscibility reaches a maximum. Above that AN wt %, it began to decrease. The flexural strength increased as the miscibility between SAN_x and PAr segments increased. In particular, when x was between 20 and 30 wt %, PAr–SAN_x–PAr exhibited three times larger flexural strength than PAr–PS–PAr. The fracture behavior changed from brittle to ductile, even though the telechelic SAN_x by themselves exhibited almost the same fracture strength as the telechelic PS. The results of dynamic mechanical measurements and the percolation model suggested that around these AN wt % the continuum matrices in PAr–SAN_x–PAr changed from SAN_x phase to a cocontinuous phase of SAN_x and PAr. From these results, PAr–SAN_x–PAr was explained to perform such a high flexural strength by this phase change in the continuum matrices. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 127–137, 2000     

The structure and physical properties of in situ composites based on semiflexible thermotropic liquid crystalline copolyesteramide and poly(butylene terephthalate)

Liquid crystalline polymer–poly(butylene terephthalate) (LCP/PBT) blends were prepared by melt mixing. The LCP employed was a thermotropic copolyesteramide based on 30 mol % of p‐amino benzoic acid (ABA) and 70 mol % of poly(ethylene terephthalate) (PET). The thermal, dynamic mechanical and rheological properties, morphology, and crystal structure of LCP/PBT blends were studied. The results showed that the semiflexible ABA30/PET LCP is miscible in the melt state with PBT, and they are partial miscible in the solid state. Differential scanning calorimetric measurements showed that the introduction of the semiflexible LCP into LCP/PBT blends retards the crystallization rate of PBT. However, the LCP dispersed phase acted as the sites for the nucleation of spherulites and enhance the degree of crystallinity of PBT. Hot‐stage optical microscopy examination revealed that the LCP microfibers with random orientation are dispersed in the PBT matrix of compression molded LCP/PBT blends. Under the application of a shearing force, the LCP domains in the PBT matrix tended to deform into microfibers, and to orient themselves along the flow direction. The formation of microfibers resulted in an increase of the storage modulus. The torque measurements indicated that the melting viscosity of the LCP/PBT blends is much lower than that of the pure PBT. Finally, the wide‐angle X‐ray diffraction patterns indicated that PBT shows no structural change with the incorporation of LCP, but the apparent crystal sizes of several diffraction planes change significantly. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 403–414, 2000     

Miscibility and crystallization behavior of solution-blended PEEK/PI blends

Miscibility and crystallization behavior of solution-blended poly(ether ether ketone)/polyimide (PEEK/PI) blends were investigated by using DSC, optical microscopy and SAXS methods. Two kinds of PIs, YS-30 and PEI-E, which consist of the same diamine but different dianhydrides, were used in this work. The experimental results show that blends of PEEK/YS-30 are miscible over the entire composition range, as all the blends of different compositions exhibit a single glass transition temperature. The crystallization of PEEK was hindered by YS-30 in PEEK/YS-30 blends, of which the dominant morphology is interlamellar. On the other hand, blends of PEEK/PEI-E are immiscible, and the effect of PEI-E on the crystallization behavior of PEEK is weak. The crystallinity of PEEK in the isothermally crystallized PEEK/YS-30 blend specimens decreases with the increase in PI content. But the crystallinity of PEEK in the annealed samples almost keeps unchanged and reaches its maximum value, which is more than 50%. The spherulitic texture of the blends depends on both the blend composition and the molecular structure of the PIs used. The more PI added, the more imperfect the crystalline structure of PEEK. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2267–2274, 1998     

Miscibility of Polyoxymethylene Blends as Revealed by High-resolution Solid-state 13C-NMR Spectroscopy

The miscibility of polyvinylphenol (PVPh) or terpenephenol (TPh) with polyoxymethylene (POM) was examined by high-resolution solid-state ¹³C nuclear magnetic resonance (NMR) spectroscopy. It was found that the driving force for the mixing of POM and PVPh is the hydrogen-bonding interaction between the phenolic OH group of PVPh and the ether oxygen of POM, and that the mixing is preferentially induced in the noncrystalline phase. ¹H relaxation time experiments indicated that POM/PVPh blends were homogeneous on a scale of 20–30 nm but heterogeneous on a scale of 2–3 nm. On the other hand, Fourier transform infrared and cross-polarization/magic-angle-spinning ¹³C-NMR (nuclear magnetic resonance) spectra revealed that POM and TPh are also mixed in the noncrystalline phase through the intermolecular hydrogen-bonding interaction, while some fraction of POM is still crystallizable. Moreover, the domain size of the micro-phase separation was estimated to be about 1 nm by the direct ¹H spin-diffusion measurements, suggesting almost homogeneous mixing on a molecular level in the noncrystalline phase. © 1997 John Wiley & Sons, Ltd.     

Thermal characterization and solid‐state 13C‐NMR investigation of blends of poly(N‐phenyl‐2‐hydroxytrimethylene amine) and poly(N‐vinyl pyrrolidone)

The miscibility and thermal properties of poly(N‐phenyl‐2‐hydroxytrimethylene amine)/poly(N‐vinyl pyrrolidone) (PHA/PVP) blends were examined by using differential scanning calorimetry (DSC), high‐resolution solid‐state nuclear magnetic resonance (NMR) techniques, and thermogravimetric analysis (TGA). It was found that PHA is miscible with PVP, as shown by the existence of a single composition‐dependent glass transition temperature (T_g) in the whole composition range. The DSC results, together with the ¹³C crosspolarization (CP)/magic angle spinning (MAS)/high‐power dipolar decoupling (DD) spectra of the blends, revealed that there exist rather strong intermolecular interactions between PHA and PVP. The increase in hydrogen bonding and in T_g of the blends was found to broaden the line width of CH—OH carbon resonance of PHA. The measurement of the relaxation time showed that the PHA/PVP blends are homogeneous at least on the scale of 1–2 nm. The proton spin‐lattice relaxation in both the laboratory frame and the rotating frame were studied as a function of the blend composition, and it was found that blending did not appreciably affect the spectral densities of motion (sub‐T_g relaxation) in the mid‐MHz and mid‐KHz frequency ranges. Thermogravimetric analysis showed that PHA has rather good thermal stability, and the thermal stability of the blend can be further improved with increasing PVP content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 237–245, 1999     

Phase behavior and some calorimetric and physical properties of diurethanes from perfluoropolyether macromonomers

Density and calorimetric measurements have been carried out on copolymeric perfluoropolyethers of molecular weight ranging between 500 and 4700, terminated at both chain ends either with  CH₂OH or ethylurethane groups. Samples of the second series are models for perfluoropolyethers based polyurethanes. Density measurements point out that the terminal alcoholic group brings about a negative excess volume, which increases with decreasing the molecular weight; a lower excess volume is found for urethane‐terminated molecules. Calorimetric traces, T_g, and Δc_p at T_g show that alcoholic‐terminated molecules are amorphous and one phase systems, while urethane‐terminated compounds are crystalline; phase separation is observed for this last series when the molecular weight of the fluorinated segment is larger than 1000. The trend of T_g with molecular weight is discussed for one‐ and two‐phase systems in the light of current theories for the glass transition. The decrease of the melting point with increasing the molecular weight for the urethane series can be described by the Flory equation for random copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1609–1622, 1999     

Transmission electron microscopy study of phase morphology in polypropylene/ethylene-octene copolymer blends

Blends of polypropylene (PP) and ethylene-octene copolymers (EOC) were investigated by transmission electron microscopy (TEM) and by differential scanning calorimetry (DSC). The EOC contained 28, 37, 40 or 52 wt% of octene. Only the 50/50 PP/EOC ratio was used for all blends. None of the blends was fully miscible, there was always two-phase morphology. TEM observation followed by image analysis by ImageJ software revealed that the largest particles were in blend containing EOC-28 and the smallest were in blend with EOC-52. The coarsening rate at 200 °C was evaluated by TEM. The glass transition temperature (T_g) shift indicated partial miscibility. Partial miscibility was then confirmed by direct observation of bright PP lamellae in EOC dark phase.     

末端功能基团对聚（3-丁基噻吩）光电性能的影响

研究了4种带有不同末端基团的聚（3-丁基噻吩）（P3BT）的光电性能。 结果表明,末端基团对P3BT的结晶有一定的抑制作用,可以改变P3BT的表面能,从而有效调控P3BT∶PCBM共混体系相容性以及薄膜的形貌,并影响以P3BT为给体材料的聚合物光伏器件的性能。 其中,带有较短烷基链末端基团的烯丙基封端P3BT具有较高的结晶性,与PCBM具有适中的相容性,使得光伏器件的光敏层能够形成理想的微相分离结构,器件效率可以达到3.1%,较传统的溴封端P3BT器件效率提升35%以上。