The effect of interfacial miscibility on the cell morphology of polyethylene terephthalate/bisphenol a polycarbonate blend foams

Annealing polyethylene terephthalate (PET)/polycarbonate (PC) blends enhance the transesterification reaction and increase the amount of copolymer at the interface of both polymers. The copolymer enhances the compatibility of PET with PC, because it contains both PET and PC blocks, which causes the interface between PET and PC to become fuzzy. When the PET/PC undergoes batch physical foaming with CO₂, the copolymer significantly changes the resulting cell morphology, that is, the annealing time. Before annealing or in the absence of the copolymer, bubble nucleation occurs and dominates growth at the interface. When the PET/PC blends are annealed, the interface impedes bubble nucleation and growth. The polymer is stretched at the interface by bubble growth, forming fibril‐like structures connecting two polymer domains at the interface. Increased annealing time causes the interface to become more homogeneous and makes heterogeneous bubble nucleation difficult. At higher copolymer concentrations, the interface of PET and PC becomes fuzzy and the cell morphology becomes like those of foamed homogeneous polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and Characterization of 2d Ferromagnetic (RNH3)2CrX4 Containing Mixed-Halides,R = CnH2n+1, X = Br,C1

The bis(benzylammonium)tetrahalogenochromate(II), (C₆H₅CH₂NH₃)₂CrBr₃. ₃Cl₀. 7, has been synthesized and characterized. The crystal structure is related to that of K₂NiF₄. The compound is ferromagnetic and the Curie temperature T_C (T_C= 49 K) has been measured by a mutual inductance technique. The susceptibility increases sharply at T_C and then shows a drop-off below T_C, typical of a single-domain powder sample. The compound is found to behave as a typical 2D easy plane ferromagnet.     

Eco-friendly solution processing of all-polymer solar cells: Recent advances and future perspective

All-polymer solar cells (all-PSCs) exhibit great potentials in commercial applications. All-PSCs have observed steady performance gains with power conversion efficiency now reaching over 17% in the open literature. However, the current processing of all-PSCs relies predominantly on toxic, chlorinated solvents in moisture-free environments, representing a significant barrier for their commercialization due to the added costs to handle and dispose of such solvents. There is thus an urgent need for safe, environmentally benign, and sustainable ink-based processing methods to produce all-PSC devices reliably and reproducibly in ambient air. In this perspective, fundamental insights on the interplay between all-polymer blend morphologies and eco-friendly solvents are provided. Also, we discuss the recent successes of the green processing methods to manipulate the photoactive morphologies for high-efficiency all-PSCs. In the end, we provide an outlook on future challenges and opportunities of eco-friendly solvents processed all-PSCs for large-scale manufacturing.     

Phase segregation of metastable quenched liquid mixtures and the effect of the quenching rate

The effect of the quenching rate on the phase separation of partially miscible liquid mixtures is studied, showing that it may influence the growth rate of single-phase domains. In particular, the phase separation of metastable binary mixtures in the presence of strong emulsifiers appears to be heavily retarded. These effects constitute an important limitation to the phase transition extraction process introduced by the authors in previous works, which is based on the fact that phase separation of unstable mixtures is rapid, even in the presence of surface active compounds.     

Small molecule‐mediated glass transition of acrylic copolymers: Effect of hydrogen bonding strength on glass transition temperature

Poly(styrene‐co‐ethyl acrylate) [P(St‐co‐EA)] with different ratios of St/EA was mixed with the small molecule 4,4′‐thio‐bis(6‐tert‐butyl‐m‐methyl phenol) (AO300) to investigate the influence of hydrogen bonding strength on the glass transition behavior. The glass transition temperature (T_g) linearly increased after adding AO300, and the slope value decreased with increased St/EA ratio. All lines could be extended to 62 °C, demonstrating that T_g of the small molecule in situ detected by the polymer chain was much higher than that by small molecule itself (29 °C). Fourier transform infrared spectroscopy analysis showed that the small molecules began to be self‐associated at a concentration where the hydrogen bonded carbonyl ratio of the bulk polymer was approximately 0.5 and irrespective of the St/EA ratio. Above the critical loading, the mixture's T_g negatively deviated from the linearly extended lines because of self‐association of the small molecules. The apparent T_g of AO300 was found to strongly depend on intermolecular hydrogen bonding number and strength. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 400–408     

Antibacterial and Miscibility Properties of Chitosan/Collagen Blends

The miscibility, bioactivity, and antibacterial properties of chitosan/collagen specimens were systematically studied. The specimens were prepared by blending collagen and chitosan with varying deacetylation degrees in solutions; the collagen molecules had been extracted from pigskins using the acid swelling-pepsin digestion method. To understand the miscibility properties of collagen and chitosan molecules, the intrinsic viscosity and differential scanning calorimetry analysis of collagen, chitosan, and collagen/chitosan specimens were performed. The instrinsic viscosity measurements suggested that chitosan and collagen molecules with varying deacetylation degrees were miscible at molecular level for all compositions and degrees of deacetylation of chitosan/collagen mixture solutions prepared in this study. Fourier transform infrared analyses suggested that the percentage of preserved triple helix structures present in collagen molecules in collagen/chitosan specimens decreased with increasing chitosan contents, since the ratios of peak absorbance at 1239 cm^?1 of amide III and 1455 cm^?1 of C?H bending of collagen/chitosan specimens decreased significantly with increase in their chitosan contents. Abnormally high denaturation temperatures (T_d) were observed as the chitosan contents of collagen/chitosan specimens reached 40 wt%, at which T_d of collagen molecules was even higher than that of the corresponding pure chitosan molecules with varying deacetylation degrees. The antibacterial activity of collagen/chitosan blends increased consistently with increasing deacetylation degrees and concentrations of chitosan molecules in collagen/chitosan solutions. Possible explanations for these interesting thermal denaturation, antibacterial, and miscibility properties of chitosan/collagen specimens are reported.     

The Potential of O‐MMT as a Reinforcing Filler for Uncured and Dynamically Cured PVC/XNBR Composites

Organic montmorillonite modified with quaternary ammonium (O‐MMT) was compounded with uncured and dynamically cured poly(vinyl chloride)/carboxylated nitrile butadiene rubber (PVC/XNBR) composites, using a Brabender Plasticorder at 130°C and 50 rpm rotor speed. The reinforcing efficiency of the O‐MMT was investigated in the uncured PVC/XNBR composite and the dynamically cured PVC/XNBR counterpart. Mixing and dynamic curing of the composites were monitored by typical torque‐time curves derived from a Brabender internal mixer. The torque‐time curves revealed that the dynamic curing process was successful and the incorporation of O‐MMT has no adverse effect on the processibility of the composites. It has been found that the introduction of crosslinks within the rubbery phase in the presence of the O‐MMT has further improved the tensile properties. DMA studies revealed that dynamically cured composite with O‐MMT showed higher storage modulus than the composite without O‐MMT. Furthermore, a one‐step tensile modulus vs. temperature curve and a related one peak tensile loss modulus vs. temperature curve were obtained, consequently, both are characteristics of a miscible polymers system. Further evidence on the composite miscibility was purchased by thermal scans from DSC, which showed a single glass transition temperature of PVC/XNBR composites. This claim was further supported by ATR‐IR spectra which revealed that hydrogen bonding is extensively involved in PVC/XNBR composites. This evidence unveiled the exact nature of the specific interactions responsible for miscibility and hence, enhanced mechanical properties. Furthermore, we proved in our studies the reinforcing role played by layered clay due to better dispersion, as well as improved interactions.     

Miscibility and Thermal Behavior of Pullulan/Polyacrylamide Blends

Blends of Pullulan (PU) and Polyacrylamide (PAM) having biomedical applications were prepared and characterized in order to evaluate the miscibility of natural component with the synthetic one. Blends with different composition ratios were prepared using water as common solvent. Viscosity, ultrasonic velocity and density were measured at 30 and 40°C. Furthermore, the blend films were prepared by a solution casting method and analyzed by DSC, FTIR and TGA methods. Results of ultrasonic and density methods revealed the semi-miscibility of the blend. Using viscosity data, interaction parameters (Chee's ‘μ’ and Sun's ‘α’) were computed. The values confirmed that the blend is miscible when the Pullulan content is less than 20% in the blend. Change in temperature had no effect on the miscibility nature of the blends. Intermolecular interactions of hydrogen bonding type were confirmed by DSC and FTIR methods. Thermal behavior of blends was investigated using TGA method.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.     

Miscibility Studies of Dextran/Poly(vinyl pyrrolidone) Blend in Solution

The miscibility of dextran (Dex)/poly(vinyl pyrrolidone) (PVP) in solution has been investigated in different percentages of the blend components by employing viscosity, density, refractive index and ultrasonic velocity methods at 30 and 50°C, respectively. Ultrasonic velocity and adiabatic compressibility against blend compositions were plotted and found to be linear. The interaction parameters μ and α have been obtained by using the viscosity data. The results indicated that the Dex/PVP blends are miscible in the entire composition range and it was further confirmed by ultrasonic velocity, density, refractive index studies. In addition, the results revealed that the change in temperature has no significant effect on the miscibility of Dex/PVP polymer blend.